Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
08051C104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.1uF capacitance, 100V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size and high operating temperature range from -55°C to 125°C.
Median Price
$0.040
Lifecycle Status
Suppliers In-Stock
44
In-Stock Inventory
1k+
RS (Exports)
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.044
$0.042
Distrelec
$0.064
$0.043
$0.032
RS Americas
$0.130
$0.111
Mouser Electronics
$0.150
$0.055
$0.018
Chip1Stop
$0.014
Future Electronics
$0.033
Arrow
Verical
$0.012
Avnet
Newark
$0.027
Farnell
$0.071
$0.034
$0.030
TTI Europe
$0.028
TTI
Nova Conductors
$0.039
Ozdisan Elektronik
$0.045
Maritex
$0.088
$0.017
TME
$0.140
$0.053
Component Electronics Inc.
$0.420
$0.320
$0.280
NAC Semi
$0.086
IBS Electronics
$0.063
Chip Stock
Vyrian
Bristol Electronics
Rutronik
$0.011
North Shore Components
Atlantic Semiconductor
Sensible Micro Corp
ComSIT Distribution GmbH
QIE Inc.
LWI Electronics Inc
Prism Electronics
Dan-Mar Components
VNN
Cyclops Electronics Ltd
Connect4Technologies Inc.
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Lantek
Sunrise Surplus Inc.
Semi Source
Microfarads
PC Components Company LLC
Elcom Components
Semicontronic
Ampacity Inc.
Argo Parts USA
$0.035
Aztec Data Supply Inc.
Corohmni
J3
Advanced Electronics
Continental Prestige Electronics
$0.089
Allen Electronics Distributors
$0.143
$0.136
$0.106
Perfect Parts
Infinite Electronics LLP (Excess)
GreenTree Electronics
Formix International (Excess)
Abacus Technologies
RC Electronics
Computer Components Inc. - USA
Resion (Excess)
Cyclops Electronics Ltd (Excess)
Eastek
S.R.D Solutions
Speed Components Ltd (Excess)
Robosynatics
$4.044
Lucentia Tech
Ceramic is a common and reliable dielectric material known for its stability and low loss, making this capacitor suitable for various applications.
Rectangular packages are space-efficient and easily mounted on circuit boards, allowing for streamlined design layouts.
Multi-layer construction provides higher capacitance values in a compact form factor, ideal for applications requiring high capacitance in limited space.
Embossed packaging ensures secure transport and storage of the capacitors, protecting them from damage and contamination.
Having two terminals simplifies the installation and connection process, making it user-friendly for circuit integration.
Surface Mount Technology (SMT) allows for automated assembly processes, improving efficiency and consistency in production.
Wraparound terminals provide a secure connection and better solder joint reliability, enhancing the overall durability of the capacitor.
A negative tolerance of 10% ensures that the actual capacitance value of the capacitor is within an acceptable range, guaranteeing consistent performance.
X7R temperature characteristics indicate stable performance over a wide temperature range, making the capacitor suitable for diverse operating conditions.
With a high maximum operating temperature, this capacitor can withstand elevated temperatures without compromising its functionality or lifespan.
Ceramic capacitors are known for their reliability, stability, and low losses, making them a popular choice for various electronic applications.
Surface mount capability simplifies the assembly process and saves space on the circuit board, contributing to a more efficient and compact design.
The capacitance value of 0.1 uF is suitable for filtering applications and decoupling circuits, providing the necessary capacitance for effective signal processing.
The high rated DC voltage of 100 V allows this capacitor to be used in a wide range of voltage applications, ensuring compatibility with various circuit requirements.
Fixed Capacitors 08051C104KAT2A attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
08051C104KAT2A Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.24.00.20
SB
Product Change Notification (PDF)
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
CDSOT23-SM712
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Hitano Enterprise
Meritek Electronics
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LMK325BJ107MM-T
Taiyo Yuden
Taiyo Yuden's LMK325BJ107MM-T is a ceramic capacitor with 100uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for surface mount applications in various electronic devices.
CK05BX104K
Cornell Dubilier Electronics
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
UUD1H101MNR1GS
Nichicon
Nichicon UUD1H101MNR1GS is a 100uF, 50V aluminum electrolytic capacitor with tan delta of 0.14 and leakage current of 0.05mA. Ideal for surface mount applications in electronics due to its high ripple current rating of 300mA.
CL21B106KOQNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL21B106KOQNNNE is an 0805 SMT ceramic capacitor with 10uF capacitance and 16V URdc. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for various electronic applications requiring stable performance in a compact surface mount package.
EEEFT1E101AP
Panasonic
Panasonic EEEFT1E101AP is a 100uF aluminum electrolytic capacitor with 25V rated DC voltage. It features tan delta of 0.14, leakage current of 0.025mA, and ripple current of 195mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
CL05B102KB5NNNC
CL05B102KB5NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.001uF capacitance and 50V URdc. With X7R temp characteristics, it operates from -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
M39006/25-0236
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C104K5RAC7081
KEMET Corporation
C0603C104K5RAC7081 by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This surface mount capacitor is commonly used in various electronic applications.
CC0402MRX5R5BB475
Yageo
Yageo CC0402MRX5R5BB475 is a 4.7uF ceramic capacitor with X5R temp characteristics, 6.3V URdc, and 20% tolerance. Ideal for SMT applications in electronics due to its compact size (1x0.5x0.5mm) and temperature coefficient of 15%/°C.
C0603C104M4RACTU
KEMET C0603C104M4RACTU is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
12065C104KAT2A
KYOCERA AVX
12065C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 3.2mm x 1.6mm x 0.94mm and wraparound terminals.
CGA4J3X7R1H225K125AB
TDK
CGA4J3X7R1H225K125AB by TDK is a ceramic capacitor with a capacitance of 2.2 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for its compact size and high performance.
C0603C104K5RAC7013
KEMET Corporation's C0603C104K5RAC7013 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
M39006/22-0377
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/22-0351
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CL05B103KB5NNNC
CL05B103KB5NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It features a temperature coefficient of 15% ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style and matte tin terminal finish, it's ideal for surface mount designs in various electronic devices.
C1206C106K3PACTU
KEMET C1206C106K3PACTU is a 10uF ceramic capacitor with X5R temp characteristics, 25V rated DC voltage. Ideal for SMT applications, it has a compact size of 1.6mm x 1.6mm x 3.2mm and operates b/w -55°C to 85°C, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
CC0805KKX5R6BB106
Yageo CC0805KKX5R6BB106 is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package design.
MAL202137479E3
Vishay Intertechnology's MAL202137479E3 is a 47uF aluminum electrolytic capacitor with 40V rated DC voltage. It features a tan delta of 0.11, leakage current of 0.0078mA, and ripple current of 110mA. Ideal for applications requiring high capacitance and reliability in temperatures ranging from -40 to 85°C.
06035C103KAT2A
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08055C104KAT2A
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
08055C104KAT4A
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
08055C103KAT2A
08055C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature code. Ideal for applications requiring compact size and high reliability in a wide temperature range from -55 to 125°C.
0805B104K500CT
Walsin Technology
0805B104K500CT by Walsin Technology is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring compact size and stable performance.
American Accurate Components
CERAMIC CAPACITOR; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Custom Capabilities: Other Size,Cap,Volt & 13" Reel Available;
Knowles Precision Devices
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Fenghua Advanced Technology
08055C104JAT2A
08055C104JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
08055C104K4T2A
08055C104K4T2A by KYOCERA AVX is an 0805 SMT ceramic capacitor with 0.1uF capacitance, 10% tolerance, X7R temperature characteristics. It operates b/w -55 to 125 °C and is ideal for automotive applications meeting AEC-Q200 standard.
08055C103K4T2A
08055C103K4T2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 10% tolerance, and X7R temperature coefficient. Ideal for AEC-Q200 applications requiring compact design and reliable performance in temperatures ranging from -55 to 125°C.
08053C104KAT2A
08053C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
08051C103KAT2A
08051C103KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 100V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
08051C182KAT2A
08051C182KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.0018uF capacitance and 100V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, ideal for applications requiring compact size and high reliability in electronic circuits.
0805YD106KAT2A
0805YD106KAT2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 85°C.
08055C105K4T2A
08055C105K4T2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance, 50V URdc, X7R temp code, and -55 to 125 °C operating range. Ideal for automotive applications due to AEC-Q200 standard compliance and compact size for surface mount installation.
08055C224KAT2A
08055C224KAT2A by KYOCERA AVX is a rectangular package ceramic capacitor with a capacitance of 0.22 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
08055C104K4Z2A
08055C104K4Z2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
08053C105KAT2A
08053C105KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance, 25V URdc, X7R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and high operating temperature range of -55 to 125°C.
08055C105KAT2A
08055C105KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact size, high capacitance, and reliable performance in various electronic devices.
08051C104KAX2A
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved