Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
06035C271K4Z2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.00027uF, rated at 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for automotive applications meeting AEC-Q200 standard.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kiltronic GmbH
Nova Conductors
Ampacity Inc.
$1.010
AZTECH Wire
$9.050
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Ceramic dielectric material ensures high stability and reliability in various temperature conditions.
Rectangular package shape allows for easy mounting on circuit boards and efficient use of space.
Multi-layer design provides increased capacitance in a compact form factor.
Secure packing method ensures safe transportation and storage of the capacitors.
Having two terminals simplifies the connection process during installation.
Surface mount package style offers easy and efficient integration into circuits.
Wraparound terminal shape provides a secure connection to the circuit board.
Having a negative tolerance of 10% ensures consistency in capacitance values.
X7R temperature characteristics code indicates stable performance over a wide temperature range.
Capacitor can operate at high temperatures without compromising performance.
Ceramic capacitors are known for their high dielectric strength and reliability.
Capacitor can withstand low temperatures, making it suitable for various environments.
Low temperature coefficient ensures minimal changes in capacitance with temperature variations.
Matte tin over nickel terminal finish provides good conductivity and corrosion resistance.
Compact height allows for easy integration into tight spaces on circuit boards.
Narrow width saves space on the circuit board for efficient layout design.
Surface mount design simplifies the assembly process and saves time during installation.
Optimal length for easy installation and secure connection within the circuit.
Having a positive tolerance of 10% ensures consistency in capacitance values as well.
This specific capacitance value meets the requirements of many electronic circuits and applications.
Compliance with AEC-Q200 standard ensures high reliability for automotive electronics applications.
Rated for a maximum DC voltage of 50V, suitable for various electronic systems and components.
Fixed Capacitors 06035C271K4Z2A attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
06035C271K4Z2A Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA4J3X7R1C475K125AB
TDK
TDK's CGA4J3X7R1C475K125AB is a ceramic capacitor with 4.7uF capacitance, X7R temperature characteristics, and 16V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 0805 size.
UCD1H221MNL1GS
Nichicon
Nichicon UCD1H221MNL1GS is a 220uF aluminum electrolytic capacitor with 50V URdc. It has low tan delta of 0.10 and leakage current of 0.11mA, suitable for AEC-Q200 applications in automotive electronics due to its high ripple current rating of 350mA.
M39006/25-0143
Vishay Intertechnology
Vishay Intertechnology's M39006/25-0143 is a TANTALUM CAPACITOR with 330uF capacitance, 50V URdc, and 0.38 Tan Delta. Ideal for MIL-PRF-39006/25 applications, it operates b/w -55 to 125 °C with a leakage current of 0.009 mA.
C1206C106K3PACTU
KEMET Corporation
KEMET C1206C106K3PACTU is a 10uF ceramic capacitor with X5R temp characteristics, 25V rated DC voltage. Ideal for SMT applications, it has a compact size of 1.6mm x 1.6mm x 3.2mm and operates b/w -55°C to 85°C, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
C4532X7R1E226M250KC
TDK C4532X7R1E226M250KC is a 22uF ceramic capacitor with 25V URdc. X7R temperature characteristics, -55 to 125 °C operating range, and SMT package make it ideal for surface mount applications in various electronic devices.
BFC241646803
Vishay Intertechnology BFC241646803 is a film capacitor with 0.068 uF capacitance, 63 V rated DC voltage, and 25 V rated AC voltage. It features polypropylene dielectric material and is suitable for applications requiring a temperature range of -55 to 85 °C. Ideal for through hole mounting in various electronic circuits.
C0805C103K1RACTU
KEMET C0805C103K1RACTU is a ceramic capacitor with 0.01uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over wide temperature ranges.
BFC238320224
Vishay Intertechnology BFC238320224 is a film capacitor with 0.22 uF capacitance and 630 V rated DC voltage. It has a rectangular package shape, radial terminal style, and operates b/w -55 to 105 °C. Ideal for applications requiring high voltage tolerance and reliable performance in various electronic circuits.
M39006/22-0565
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1812C104K5RACTU
KEMET C1812C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
GRM188C81C106MA73D
Murata Manufacturing
GRM188C81C106MA73D by Murata is a ceramic capacitor with 10uF capacitance and 16V rated DC voltage. With X6S temp characteristics, it operates b/w -55 to 105 °C, making it ideal for SMT applications requiring compact size and high reliability.
CGA8P1X7R1E226M250KC
TDK's CGA8P1X7R1E226M250KC is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. Its compact SMT package shape and wraparound terminals facilitate easy surface mount installation.
CGA6P3X7R1H475K250AB
TDK's CGA6P3X7R1H475K250AB is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. With SMT package style and compact dimensions of 2.5mm x 2.5mm x 3.2mm, it offers reliable performance in surface mount configurations.
UMK325BJ106KM-T
Taiyo Yuden
UMK325BJ106KM-T by Taiyo Yuden is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It features X5R temperature characteristics, suitable for applications requiring compact SMT components with high reliability in a wide temperature range from -55°C to 85°C. The rectangular package design with wraparound terminals makes it ideal for surface mounting in various electronic devices.
BFC238320474
Vishay Intertechnology BFC238320474 is a 0.47uF film capacitor with 630V DC and 220V AC ratings. Featuring polypropylene dielectric, it has a rectangular package shape for through-hole mounting applications. With a temperature range of -55 to 105 °C, it is ideal for various electronic circuits requiring high capacitance and voltage tolerance.
CGA4J3X7R1H225K125AB
CGA4J3X7R1H225K125AB by TDK is a ceramic capacitor with a capacitance of 2.2 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for its compact size and high performance.
CGA5L1X7R1E106K160AE
TDK's CGA5L1X7R1E106K160AE is a ceramic capacitor with 10uF capacitance, 25V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 3.2x1.6x1.6mm size.
GCM188R71H103KA37D
Murata Manufacturing's GCM188R71H103KA37D is a ceramic capacitor with 0.01uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
C1608X7R1C105K080AC
TDK C1608X7R1C105K080AC is a 0603 SMT ceramic capacitor with 1uF capacitance, 16V URdc, X7R temp characteristics. Ideal for surface mount applications in electronics due to its compact size, high operating temperature of 125°C, and low temperature coefficient of 15 ppm/°C.
CL10A105KO8NNNC
Samsung Electro-mechanics
CL10A105KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for various applications requiring stable performance in a compact SMT package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
06035C103KAT2A
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
06035C104JAT2A
06035C104JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring compact size and high reliability in electronic circuits.
0603B104K500CT
Walsin Technology
0603B104K500CT by Walsin Technology is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications in various electronic devices.
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
06035C104K4T2A
06035C104K4T2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, X7R temperature coefficient, and 10% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 50V rated DC voltage.
0603YC104K4T2A
0603YC104K4T2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications due to its compact size and surface mounting feature.
06033C104KAT2A
06033C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
0603YC104K4T4A
0603YC104K4T4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for SMT applications requiring compact size and high reliability in automotive electronics.
0603YC104KAT2A
0603YC104KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in electronics requiring stable capacitance under varying temperatures.
0603YC105KAT2A
0603YC105KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance and 16V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for applications requiring compact size and high reliability in electronic circuits.
06035C104K4Z2A
06035C104K4Z2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size of 1.6mm x 0.81mm x 0.9mm.
06035C102KAT2A
06035C102KAT2A by KYOCERA AVX is a ceramic capacitor with 0.001uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
06035A220JAT2A
06035A220JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.000022uF, rated for 50V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact size and high reliability in electronic circuits.
06035A101JAT2A
06035A101JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring stable performance in temperatures ranging from -55 to 125 °C. Its SMT package style makes it suitable for surface mounting feature.
06035C102JAT2A
06035C102JAT2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.001uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 5% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
0603B103K500CT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
0603B103K500CT by Walsin Technology is a ceramic capacitor with 0.01uF capacitance, rated at 50V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for surface mount applications requiring compact size and high reliability.
Knowles Precision Devices
American Accurate Components
CERAMIC CAPACITOR; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved