Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Maximum DC Resistance: .5 ohm; Rated Current: 1 A; No. of Functions: 1; Packing Method: REEL; Rated Voltage: 100 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters SBSPP1000470MCR attributes and parameters. Explore more Data Line Filters devices from Knowles Precision Devices
Additional Features:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
SBSPP1000470MCR Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Onsemi
Digitron Semiconductors
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
First Components International
Nte Electronics
Secos
742792656
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 742792656 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and an output impedance of 750 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies ranging from 100 MHz to 150 MHz.
BLM18KG601SH1D
Murata Manufacturing
Murata's BLM18KG601SH1D is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and operates b/w -55°C to 125°C. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
74270054
FERRITE BEAD;
MQPI-18LP
Vicor
Vicor's MQPI-18LP data line filter operates at 28V with 10 terminals and a rated current of 7A. With a max temp of 125°C and impedance of 50Ω, it is ideal for applications requiring surface mount filters in temperature-sensitive environments.
MMZ2012Y600BT000
TDK
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Material: Ferrite; Rated Current: 1 A; Terminal Finish: TIN NICKEL COPPER;
MPZ1005S121CT000
TDK's MPZ1005S121CT000 is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. With dimensions of L1.0xB0.5xH0.5 mm, it operates b/w -40 to 85°C and is ideal for surface mount applications in filtering frequencies up to 100 MHz.
PA4339.132NLT
Pulse Electronics
PA4339.132NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 9uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with a max current rating of 2.5A.
SRF0905-501Y
Bourns
Bourns SRF0905-501Y is a 2-function data line filter with inductance of 500uH and rated current of 1A. It operates b/w -40 to 105°C, has a max DC resistance of 0.15 ohm, and output impedance of 1000 ohm. Ideal for surface mount applications in electronics for noise filtering and signal conditioning.
MMZ2012Y152BT000
MMZ2012Y152BT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a max DC resistance of 0.4 ohm, output impedance of 1500 ohm, and rated current of 0.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
W2F15C4738AT1F
W2F15C4738AT1F by KYOCERA AVX is a data line filter with 3 terminals, rated for 50V and 0.3A current. Featuring a feed through capacitor design, it offers high insulation resistance of 1000 Mohm and capacitance of 47000 uF. Ideal for applications requiring surface mount filters in temperature range -55 to 125 °C.
MPZ1608S331ATA00
The TDK MPZ1608S331ATA00 is a 0603 chip bead data line filter with 2 terminals. Featuring a ferrite chip construction, it has a max operating temperature of 125°C and DC resistance of 0.08 ohm. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
MI0603L221R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 2 A; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch); Height: .8 mm; No. of Terminals: 2;
7427927160
Wurth Elektronik 7427927160 is a FERRITE CHIP data line filter with 2 terminals, rated at 0.4A. It operates b/w -55 to 125 °C and has a max DC resistance of 0.3 ohm. Suitable for surface mount applications, it offers an output impedance of 60 OHM and comes in dimensions L1.0xB0.5xH0.5 mm, ideal for noise suppression in electronic circuits.
DLP11SN331HL2L
Murata Manufacturing's DLP11SN331HL2L is a data line filter with 2 functions, rated at 5V and 0.08A. It offers an output impedance of 330 ohm, suitable for applications requiring noise suppression in data lines. With dimensions of L1.25xB1.0xH0.82 (mm), it is designed for surface mount installation in various electronic devices.
PLT10HH101150PNL
Murata Manufacturing's PLT10HH101150PNL is a Data Line Filter with 2 functions, rated at 300V and 15A. It offers an inductance of 2uH, operates b/w -55 to 125 °C, and has a max DC resistance of 0.0018 ohm. Ideal for applications requiring noise suppression in data lines.
MH2029-221Y
Bourns MH2029-221Y is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite construction, it offers 220 ohm output impedance and operates b/w -55°C to 125°C. Ideal for applications requiring noise suppression in data lines up to 100MHz frequency.
MMZ2012S121AT000
MMZ2012S121AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.15 ohm and output impedance of 120 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference.
FBMH4532HM681-T
Taiyo Yuden
FBMH4532HM681-T by Taiyo Yuden is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
NUF4220MNT1G
NUF4220MNT1G by Onsemi is a Data Line Filter with 4 functions and 8 terminals. It operates b/w -40°C to 85°C, has a max DC resistance of 1.1 ohm, and offers a capacitance of 205 uF. This surface mount filter is ideal for applications requiring data line filtering in compact spaces.
DLW43SH510XK2K
Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved