Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FEED THROUGH CAPACITOR; Maximum DC Resistance: .005 ohm; Rated Current: 20 A; Width (mm): 5.0; Additional Features: C-TYPE CIRCUIT; No. of Terminals: 2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters SBSMC5000222MXR attributes and parameters. Explore more Data Line Filters devices from Knowles Precision Devices
Additional Features:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
SBSMC5000222MXR Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Changzhou Galaxy Century Microelectronics
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Semicoa
Cheng-yi Electronic
ACM2012-900-2P
TDK
TDK's ACM2012-900-2P is a 2-function data line filter with 4 terminals, rated voltage of 50V, and max operating temp of 85°C. Ideal for surface mount applications, it offers 0.19 ohm DC resistance, 0.4A rated current, and output impedance of 90 ohm.
ACM2012-121-2P-T002
TDK's ACM2012-121-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.37A. With dimensions of L2.0xB1.2xH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
HI1206T500R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
MH2029-301Y
Bourns
Bourns MH2029-301Y is a chip bead data line filter with 2 terminals. It offers 0.2 Mohm min insulation resistance, 100 MHz min frequency, and 1 A rated current. Ideal for applications requiring surface mount filters in compact dimensions like L2.0XB1.2XH0.9 (mm).
D-08C2A
KEMET Corporation
The KEMET Corporation D-08C2A is a data line filter with 4 functions, rated at 50V and 0.5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25 to 65°C. With dimensions of L21.0xB16.0xH14.0 mm, it is ideal for applications requiring noise filtering in electronic circuits.
BLM41PG600SN1L
Murata Manufacturing
Murata's BLM41PG600SN1L is a chip bead data line filter with 2 terminals, rated for 6A current. With dimensions of L4.5XB1.6XH1.6 (mm), it offers a max operating temperature of 125°C and output impedance of 60Ω. Ideal for surface mount applications, this ferrite chip filter operates b/w -55 to 125°C, making it suitable for noise suppression in electronic circuits up to 100MHz frequency range.
LI0402C221R-10
Laird Technologies
Laird Technologies' LI0402C221R-10 is a chip bead data line filter with 220 OHM output impedance, 0.35 ohm max DC resistance, and 25-1000 MHz frequency range. Ideal for surface mount applications in electronics to suppress electromagnetic interference (EMI) and ensure signal integrity.
ACT45B-220-2P-TL003
The TDK ACT45B-220-2P-TL003 is a FERRITE CHIP filter with 22uH inductance, 10 Mohm insulation resistance, and 0.25A rated current. Ideal for data line filtering applications due to its compact dimensions of L4.5XB3.2XH2.8 (mm) and surface mounting type.
BLM18AG601SN1D
Murata's BLM18AG601SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
W2H15C1038AT1A
KYOCERA AVX
KYOCERA AVX's W2H15C1038AT1A is a 50V data line filter with 4 terminals. Featuring feed through capacitor technology, it has dimensions of L2.01xB1.25xH1.14 mm and is surface mountable. Ideal for applications requiring noise suppression in electronic circuits.
BLM18HE601SN1D
Murata's BLM18HE601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.25 ohm and an output impedance of 600 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BNX003-01
Murata Manufacturing's BNX003-01 is a data line filter with 3 functions, rated at 150V and 10A. It offers a max insertion loss of 40 dB and operates b/w -30 to 85°C. Ideal for applications requiring high insulation resistance and low DC resistance in a compact through-hole mount design.
BLM31PG601SN1B
Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.
ZJYS51R5-M4PA(T)-01
TDK ZJYS51R5-M4PA(T)-01 is a data line filter with 4 functions, rated voltage of 50V, and insulation resistance of 100 Mohm. It operates b/w -25 to 85 °C and has dimensions of L10.5xB6.86xH4.57 mm. Ideal for applications requiring noise suppression in data lines at a max current of 0.5A.
TPD4F003DQDR
Texas Instruments
TPD4F003DQDR by Texas Instruments is a data line filter with 4 functions and 8 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount device is suitable for applications requiring protection against voltage spikes and noise in data lines.
PA3747.205NL
Pulse Electronics
PA3747.205NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. With inductance of 1280 uH, it operates b/w -40 to 125 °C and has a max DC resistance of 0.0255 ohm. Ideal for applications requiring high output impedance and rated current of 4A.
2425-001-X5U0-102AALF
Cts
Cts 2425-001-X5U0-102AALF is a FEED THROUGH CAPACITOR with 1000uF capacitance, 100V rated voltage, and 2 terminals. It operates b/w -55 to 125 °C and has a min insulation resistance of 10,000 Mohm. Ideal for PCB mounting in data line filtering applications.
B82787C0513H002
TDK B82787C0513H002 is a 2-function data line filter with 51uH inductance and 10 Mohm insulation resistance. Rated for 50V, it operates b/w -40 to 150°C, ideal for applications requiring noise suppression in data lines.
BLM15PD121SN1D11
FERRITE CHIP;
50105C
The Murata Manufacturing 50105C is a data line filter with 2 functions and 4 terminals. It has an inductance of 1000 uH, max DC resistance of 0.3 ohm, and a rated current of 0.7 A. This surface mount filter is commonly used for noise suppression in data transmission applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved