Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SBSGP0500224MXR by Knowles Precision Devices is a 50V data line filter with 0.5uH inductance, 60dB max insertion loss, and 5A rated current. Ideal for applications requiring noise suppression in data transmission systems. Dimensions: L5.25XB3.2XH2.5 (mm).
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$17.264
Bastille Electronics
With a high rated voltage, this data line filter is suitable for a wide range of applications.
The three terminals provide a secure connection, ensuring reliable performance.
Being a data line filter, this product effectively reduces noise and interference in data transmission.
With a high maximum operating temperature, this filter can withstand heat-intensive environments.
The low minimum operating temperature allows for use in colder conditions without loss of performance.
The matte tin finish provides durability and good electrical conductivity for long-lasting use.
The inductance value of 0.5 uH helps in filtering out high-frequency noise effectively.
The slim width of 3.2 mm makes this filter suitable for compact electronic devices.
With a high insertion loss, this filter efficiently suppresses unwanted signals for clean data transmission.
The low DC resistance minimizes power loss and ensures efficient operation.
The length of 5.25 mm allows for easy integration into various electronic setups.
This packing method facilitates easy handling and installation of the filter in mass production settings.
The surface mount design simplifies installation on circuit boards without the need for additional hardware.
The compact dimensions make this filter versatile for different electronic applications.
With a high rated current, this filter can handle significant power loads with ease.
The low height of 2.5 mm allows for seamless integration in space-constrained devices.
The high capacitance value ensures effective suppression of electromagnetic interference for clean data signals.
Data Line Filters SBSGP0500224MXR attributes and parameters. Explore more Data Line Filters devices from Knowles Precision Devices
Additional Features:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
SBSGP0500224MXR Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rochester Electronics
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Continental Device India
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BLM21BD221SN1D
Murata Manufacturing
BLM21BD221SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for surface mount applications to reduce noise in data lines.
7448263505
Wuerth Elektronik & Kg
7448263505 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 500uH, making it suitable for applications requiring high current filtering and protection against electromagnetic interference.
BLM18EG101TN1D
Murata's BLM18EG101TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. It offers a DC resistance of 0.045 ohm, output impedance of 140Ω, and rated current of 2A. Ideal for surface mount applications in filtering frequencies from 100MHz to 1000MHz.
DLW5BTM251SQ2L
Murata Manufacturing DLW5BTM251SQ2L is a Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 5A Rated Current. It has 2 functions and operates b/w -40°C to 85°C. Widely used in applications requiring filtering of data lines due to its low DC resistance and high output impedance of 250 ohms.
FBMJ1608HS220NTR
Taiyo Yuden
Taiyo Yuden's FBMJ1608HS220NTR is a chip bead data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. Featuring a max operating temperature of 125°C and rated current of 7.5A, it offers a min frequency of 100MHz and max DC resistance of 0.004 ohm, making it ideal for noise suppression in electronic circuits.
744242220
Wurth Elektronik 744242220 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 22uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.23 ohm. Ideal for applications requiring filtering on data lines with UL approval.
BLM18BA220SN1D
Murata's BLM18BA220SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 22 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.
BLM31AJ601SN1L
BLM31AJ601SN1L by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter measures L3.2XB1.6XH1.1 (mm) and is commonly used for impedance matching in electronic circuits.
B82787C0513H002
TDK
TDK B82787C0513H002 is a 2-function data line filter with 51uH inductance and 10 Mohm insulation resistance. Rated for 50V, it operates b/w -40 to 150°C, ideal for applications requiring noise suppression in data lines.
LFBK1608HS601-T
LFBK1608HS601-T by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.35A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and max operating temperature of 125°C. Ideal for data line filtering in surface mount applications.
FCFBMJ2125HS420-T
Taiyo Yuden's FCFBMJ2125HS420-T is a Ferrite Chip Data Line Filter with 2 terminals, 42 Ohm output impedance, and 4A rated current. It operates b/w -40°C to 85°C, has a max DC resistance of 0.008 ohm, and dimensions of L2.0xB1.25xH0.85 (mm). Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
742792096
742792096 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It has dimensions of L2.0xB1.2xH0.9 (mm) and operates b/w -55 to 125 °C, offering a max DC resistance of 0.3 ohm at 100 MHz frequency. Ideal for maintaining signal integrity in electronic circuits with an output impedance of 1000 OHM and rated current of 1 A.
BLM21PG221SN1B
BLM21PG221SN1B by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite chip construction and output impedance of 220 ohm at rated current of 2A.
MMZ1005Y102CT000
The TDK MMZ1005Y102CT000 is a chip bead data line filter with 2 terminals, FERRITE CHIP construction, and 0.74 ohm max DC resistance. It operates b/w -55 to 125 °C and has an output impedance of 1000 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
MPZ1608S331ATA00
The TDK MPZ1608S331ATA00 is a 0603 chip bead data line filter with 2 terminals. Featuring a ferrite chip construction, it has a max operating temperature of 125°C and DC resistance of 0.08 ohm. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
NFW31SP106X1E4L
Murata Manufacturing's NFW31SP106X1E4L is a 3-terminal data line filter with 30 dB attenuation at 1000 MHz. It operates b/w -40 to 85 °C and has a rated voltage of 25 V, making it ideal for high-frequency noise suppression in electronic devices. With dimensions of L3.2XB1.6XH1.8 mm, this surface mount filter offers max insertion loss of 30 dB and is suitable for tape and reel packaging applications.
CM1402-03CP
Onsemi
CM1402-03CP by Onsemi is a data line filter with 5 functions and 10 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L2.005XB1.375XH0.714 (mm) and is suitable for applications requiring a capacitance of 20 uF and an output impedance of 50 ohm.
ACM2012-361-2P-T001
TDK's ACM2012-361-2P-T001 is a 2-function data line filter with AEC-Q200 screening. It has a rated voltage of 50V, max operating temp of 105°C, and DC resistance of 0.5 ohm. Ideal for automotive applications due to its compact size (L2.0xB1.2xH1.3 mm) and surface mounting type.
BLM18AG471SN1D
Murata Manufacturing's BLM18AG471SN1D is a chip bead data line filter with 470 OHM output impedance, 0.35 ohm DC resistance, and 100 MHz frequency range. Ideal for surface mount applications in electronics to suppress electromagnetic interference and noise on data lines.
BLM31PG601SN1D
BLM31PG601SN1D by Murata is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600 OHM output impedance. Operating b/w -55 to 125 °C, it's ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) dimensions and low DC resistance of 0.09 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SBSGP0500224MXT
Knowles Precision Devices
Knowles Precision Devices SBSGP0500224MXT is a 50V data line filter with 0.5uH inductance, 60dB max insertion loss, and 5A rated current. Ideal for applications requiring noise suppression in electronic circuits.
SBSGP0500224MXB
SBSGP0500224MXB by Knowles Precision Devices is a data line filter with a rated voltage of 50V and a max operating temperature of 125°C. It has a capacitance of 220000uF and is suitable for surface mount applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved