Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIRECTIONAL COUPLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Minimum Operating Frequency: 20000 MHz; Minimum Operating Temperature: -55 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Couplers FPC08035 attributes and parameters. Explore more RF/Microwave Couplers devices from Knowles Precision Devices
Characteristic Impedance:
Construction:
Maximum Insertion Loss:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
RF or Microwave Device Type:
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM358AN
Signetics
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
General Instrument
749
Sage Laboratories
90 DEGREE HYBRID COUPLER; Maximum Insertion Loss: .1 dB; Maximum Operating Frequency: 250 MHz; Minimum Operating Frequency: 125 MHz; Additional Features: N-F; Maximum Voltage Standing Wave Ratio: 1.2;
X3C50F1-20S
Ttm Technologies
DIRECTIONAL COUPLER;
1A1305-30
Anaren
Anaren's 1A1305-30 is a RF/Microwave directional coupler with max input power of 50 dBm, VSWR of 1.4, and insertion loss of 0.25 dB. Ideal for applications requiring high frequency operation b/w 1500-2200 MHz in various environments due to its wide temperature range from -55 to 85°C.
750
Spectrum Control
90 DEGREE HYBRID COUPLER; Maximum Operating Frequency: 500 MHz; Maximum Voltage Standing Wave Ratio: 1.2; Construction: COAXIAL; Additional Features: N-F; Maximum Insertion Loss: .1 dB;
SCPJ-2-9+
Mini-circuits
Mini-circuits SCPJ-2-9+ is an RF/Microwave coupler with 30 dBm CW power, 1.42 VSWR, and 1.8 dB insertion loss. Ideal for 200-900 MHz applications, this surface-mount component offers 17 dB isolation and operates b/w -40 to 85°C.
C2023J5003AHF
90 DEGREE HYBRID COUPLER; Maximum Input Power (CW): 36.02 dBm; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2300 MHz;
DBTC-9-4
Mini-circuits' DBTC-9-4 is a 50 ohm directional coupler with max input power of 30 dBm and VSWR of 1.3. Ideal for RF applications, it operates from 5 MHz to 1000 MHz with max insertion loss of 2 dB.
X3C09P1-05S
3-10
Tyco Electronics M/a-com
DIRECTIONAL COUPLER; Minimum Operating Frequency: 75000 MHz; Maximum Operating Frequency: 110000 MHz; Construction: WAVEGUIDE; Maximum Voltage Standing Wave Ratio: 1.2; Maximum Insertion Loss: 1.4 dB;
27000
Lockheed Martin Microwave
DIRECTIONAL COUPLER; Minimum Operating Frequency: 2000 MHz; Maximum Voltage Standing Wave Ratio: 1.6; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 85 Cel; Maximum Insertion Loss: .5 dB;
90 DEGREE HYBRID COUPLER; Construction: COAXIAL; Minimum Operating Frequency: 250 MHz; Maximum Insertion Loss: .1 dB; Additional Features: N-F; Maximum Operating Frequency: 500 MHz;
852
L-3 Narda-miteq
DIRECTIONAL COUPLER; Mounting Feature: PANEL MOUNT; Maximum Operating Frequency: 3950 MHz; Minimum Operating Frequency: 2600 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Construction: COAXIAL/WAVEGUIDE;
CPL-WB-00D3
STMicroelectronics' CPL-WB-00D3 is a 50 ohm directional coupler with max input power of 35 dBm, insertion loss of 0.2 dB, and operating frequency range from 824 MHz to 2170 MHz. Ideal for RF applications where precise power monitoring and signal distribution are required in temperature range -30 °C to 85°C.
3-42
M/a-com Technology Solutions
3-42 by M/a-com Technology Solutions is a RF/Microwave Coupler with VSWR of 1.05, insertion loss of 0.6 dB, and operating frequency range from 18-26.5 GHz. Ideal for directional coupling in waveguide construction applications.
CPL-WBF-00D3
DIRECTIONAL COUPLER; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1;
3-03
DIRECTIONAL COUPLER; Maximum Insertion Loss: 3 dB; Maximum Operating Frequency: 325000 MHz; Maximum Voltage Standing Wave Ratio: 1.25; Construction: WAVEGUIDE; Minimum Operating Frequency: 220000 MHz;
CP0603A1747ASTR
KYOCERA AVX
CP0603A1747ASTR by KYOCERA AVX is a RF directional coupler with 50 ohm impedance, operating from 1710-1785 MHz. It offers low insertion loss of 0.6 dB and can handle up to 34.77 dBm CW power. Ideal for RF/Microwave applications requiring precise power monitoring in a compact component.
DBTC-20-4+
Mini-circuits' DBTC-20-4+ is a 50 ohm directional coupler with max input power of 30 dBm and VSWR of 1.6. With frequency range from 20 MHz to 1000 MHz, it offers low insertion loss of 1.3 dB, making it ideal for RF/Microwave applications requiring precise signal monitoring and control.
CPL-WB-01C2
CPL-WB-01C2 by STMicroelectronics is a directional coupler designed for RF applications, operating b/w 824 MHz and 1980 MHz. It handles up to 35 dBm input power with a max insertion loss of just 0.2 dB, functioning effectively in temperatures from -30 °C to 85 °C. Ideal for enhancing signal integrity in communication systems.
DBTC-10-13+
The Mini-circuits DBTC-10-13+ is a 50 ohm RF directional coupler with max input power of 30 dBm and VSWR of 1.6. It operates from 5 MHz to 1000 MHz, with max insertion loss of 2 dB. Ideal for RF/Microwave applications requiring precise signal monitoring and power distribution in temperature range -40°C to +85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved