Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color: SUPER BRIGHT RED; Display Height: 13.2 mm; No. of Functions: 1;
Median Price
$1.800
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Distrelec
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.502
Bristol Electronics
Component Electronics Inc.
$3.850
$2.880
$2.500
NAC Semi
Ack Elektronik San.Tic.Ltd.Sti
Vyrian
LIBRA Elektronik GmbH
J2 Sourcing AB
ACDS - Activité Composants Distribution Service
GES GmbH
Aranea Global
$0.492
$0.472
Continental Prestige Electronics
Argo Parts USA
$0.487
AZTECH Wire
$6.960
$6.680
$6.550
$6.420
Semicontronic
$14.100
$13.748
$13.677
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Eastek
LED Displays SA52-11SRWA attributes and parameters. Explore more LED Displays devices from Kingbright
Additional Features:
Color:
Configuration:
Display Height:
Maximum Forward Current:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
SA52-11SRWA Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
An Innovative LED Solution Provider Kingbright is a Taiwanese LED solution provider built on over 40 years of expertise, innovation and collaboration. We are deeply ingrained in the pursuit of excellence, manufacturing the most comprehensive, reliable and highest quality LEDs in both visible and invisible spectrums to meet various engineering needs in all industries for customers around the globe. Our commitments to technological innovation and quality excellence ensure continuous improvement to products and customer satisfaction with the superior support of our sales offices and warehouses in the US, Europe and across Asia.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Fairchild Semiconductor
Weitronic Enterprise
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DSM7UA20101T
Visual Communications Company
7 SEG NUMERIC LED DISPLAY;
PSA08-11EWA
Kingbright
16 SEG ALPHANUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .03 A; No. of Functions: 1; Color: HIGH EFFICIENCY RED;
PSA08-11SRWA
Kingbright Electronic
Kingbright Electronic's PSA08-11SRWA is a COMMON ANODE, 1 DIGIT WITH DECIMAL POINT LED display with a max forward current of 0.03 A. It is a SUPER BRIGHT RED 16 SEG ALPHANUMERIC display with a height of 20.32 mm. This display can be used in various applications requiring clear and bright alphanumeric information.
HDSP-H3E3
Broadcom
HDSP-H3E3 by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE configuration. It has a display height of 9.1mm, peak wavelength of 634nm, and max forward current of 0.02A. Ideal for applications requiring a red-orange color display, with operating temperatures ranging from -40 to 85°C.
TDSG5150
Temic Semiconductors
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Display Height: 13 mm; Maximum Forward Current: .025 A;
HDSP-815E
HDSP-815E by Broadcom is a 7-segment numeric LED display with common anode configuration. It operates at temperatures ranging from -25°C to 85°C, with a peak wavelength of 635nm and max forward current of 0.025A. Ideal for applications requiring high efficiency red color displays with a height of 20mm.
TIL323
Texas Instruments
TIL323 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has a display height of 13mm and max forward voltage of 3.5V. Ideal for applications requiring green light emission, operating b/w -25°C to 85°C temperature range.
ACSA03-41SGWA-F01
Kingbright Electronic's ACSA03-41SGWA-F01 is a COMMON ANODE 7-segment LED display with 0.025 A forward current. Featuring a 7.62mm display height, it operates b/w -40°C to 85°C and emits SUPER BRIGHT GREEN light. Ideal for numeric displays in various applications.
HDSP-A27C
Broadcom's HDSP-A27C LED display features 2 digits with decimal point, common cathode configuration, and a max forward current of 0.05A. Ideal for applications requiring a 16-segment alphanumeric display, it operates b/w -40°C to 105°C and has a display height of 13.8mm.
SA40-19SRWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; Maximum Operating Temperature: 85 Cel; Color: SUPER BRIGHT RED; Minimum Operating Temperature: -40 Cel; Additional Features: IC COMPATIBLE;
HDSP-2531
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Yellow; No. of Functions: 8; Configuration: COMPLEX; Maximum Operating Temperature: 85 Cel;
TIL311A
TIL311A by Texas Instruments is a 4x7 dot matrix LED display with peak wavelength of 660nm. It has a display height of 7.62mm and max forward voltage of 5.5V. Ideal for applications requiring red color output, operating b/w temperatures of 0-85°C in complex configurations.
LDS-HTC512RI
Lumex
Lumex's LDS-HTC512RI is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE configuration. It has a display height of 14.2mm, peak wavelength of 565nm, and max forward current of 0.025A. Ideal for applications requiring green color output, it operates b/w -40°C to 105°C temperatures efficiently.
HDSM-431H
Broadcom's HDSM-431H is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It has a max forward current of 0.025 A and peak wavelength of 572 nm. Ideal for applications requiring a GREEN display with 10 mm height, operating b/w -40 to 105 °C temperature range.
SBA23-11EGWA
Kingbright Electronic's SBA23-11EGWA is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current. Featuring HIGH EFFICIENCY RED/GREEN color, it operates b/w -40 to 85 °C and has a display height of 56.9mm. Ideal for applications requiring clear numeric displays with decimal points.
TIL364
TIL364 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm and red color. It has 4 characters, 13mm display height, and max forward voltage of 2.1V. Ideal for applications requiring clear numeric displays in temperature range of -25 to 85°C.
HDSP-7511
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Maximum Forward Current: .015 A; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Display Height: 7.6 mm;
SL2447
SL2447 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It operates b/w -20 °C to 65°C, ideal for applications requiring a green display with 4 characters at a height of 15mm.
TIL379-12
TIL379-12 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It operates b/w -25°C to 85°C, displaying in red color with 3mm height. With max forward voltage of 2.1V, it's ideal for applications requiring precise numeric displays in various environments.
SA39-11SRWA
Cml Technologies & Kg
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Display Height: 9.9 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SA52-11SURKWA
Kingbright Elec
SA52-11EWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 625; Display Height: 13.2 mm; No. of Functions: 1; Maximum Forward Current: .03 A; Color At Wavelength: Red;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Minimum Operating Temperature: -40 Cel; Color: HIGH EFFICIENCY RED; Additional Features: IC COMPATIBLE;
SA52-11SRWA
SA52-11SRWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current, emitting SUPER BRIGHT RED light at 660nm. Ideal for applications requiring a 13.2mm display height, operating b/w -40 to 85°C temperatures.
SA52-11LSRWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color: HYPER RED; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A; No. of Functions: 1;
SA52-11LEWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Minimum Operating Temperature: -40 Cel; Display Height: 13 mm; Color: SUPER RED;
SA52-11LYWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color: YELLOW; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .03 A; Display Height: 13 mm;
SA52-11CGKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Display Height: 13.2 mm; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A; No. of Functions: 1; Color: GREEN;
SA52-11SEKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A; Display Height: 13.2 mm;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; Display Height: 13.2 mm; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A;
SA52-11SYKWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Minimum Operating Temperature: -40 Cel; Color: SUPER BRIGHT YELLOW; Maximum Forward Current: .03 A;
SA52-11GWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color: GREEN; No. of Functions: 1; Additional Features: IC COMPATIBLE; Maximum Forward Current: .025 A;
SA52-11HWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .025 A; JESD-609 Code: e0; Display Height: 13.2 mm;
SA52-11RWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; Maximum Operating Temperature: 85 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Additional Features: IC COMPATIBLE; Display Height: 13 mm;
SA52-11YWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Additional Features: IC COMPATIBLE; Color: YELLOW; Display Height: 13.2 mm; Maximum Forward Current: .03 A; Maximum Operating Temperature: 85 Cel;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Additional Features: IC COMPATIBLE; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Color: GREEN;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Color: YELLOW; Additional Features: IC COMPATIBLE; Color At Wavelength: Yellow; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A; No. of Functions: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; Color: SUPER BRIGHT ORANGE; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Display Height: 13.2 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .03 A; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved