Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET T543X106M063AHE050 is a 10uF, 63V tantalum capacitor with Tan Delta of 0.1 and ESR of 50mohm. Ideal for applications requiring high ripple current handling, such as power supplies and voltage regulators in electronic devices.
Median Price
$12.510
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$8.350
1k+ parts
-
10k+ parts
DigiKey
$7.364
Vyrian
Nova Conductors
Resion
Corohmni
$0.156
Aztec Data Supply Inc.
$0.218
Ampacity Inc.
$9.000
Authorized Procurement Solutions
Perfect Parts
Argo Parts USA
Aranea Global
TANTALUM (SOLID POLYMER) - Provides excellent stability and reliability.
0.1 - Indicates low dissipation factor for efficient operation.
0.063 - Low leakage current ensures energy efficiency.
555.75 - High ripple current handling capability for reliable performance.
TR, EMBOSSED PLASTIC, 7 INCH - Convenient and secure packaging for transportation and storage.
2917 - Compact size for versatile application in various electronic devices.
2 - Simplifies installation process.
SMT - Suitable for surface mount technology for easy assembly.
J BEND - Allows for secure and stable connection.
20% - Provides flexibility in capacitance value selection.
125 °C - Ensures stable performance under high temperature conditions.
TANTALUM CAPACITOR - Known for high reliability and long lifespan.
55 °C - Operates effectively even in low temperature environments.
TIN LEAD - Ensures good electrical conductivity.
POLARIZED - Prevents reverse connection and damage.
4 mm - Compact design for space-saving installation.
4.3 mm - Fits easily in tight spaces.
50 - Low ESR for efficient energy transfer.
SURFACE MOUNT - Easy and secure mounting on PCBs.
7.3 mm - Suitable for various electronic applications.
10 uF - Ideal for filtering and decoupling applications.
63 V - Suitable for a wide range of voltage requirements.
Fixed Capacitors T543X106M063AHE050 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
T543X106M063AHE050 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
1N4148WT
Good-ark Electronics
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Crimson Semiconductor
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C102KGRACAUTO
KEMET Corporation
C1206C102KGRACAUTO by KEMET Corp is a rectangular package ceramic capacitor with a capacitance of 0.001 uF and rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard.
GCM21BR72A104KA37L
Murata Manufacturing
Murata Manufacturing's GCM21BR72A104KA37L is a ceramic capacitor with capacitance of 0.1uF, rated at 100V DC. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
LMK107BBJ106MALT
Taiyo Yuden
Taiyo Yuden's LMK107BBJ106MALT is a ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications due to its compact 0.8x.8x1.6mm size and wraparound terminals for efficient surface mounting.
ECA1HHG4R7
Panasonic
ECA1HHG4R7 by Panasonic is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for AEC-Q200 standards. Featuring low Tan Delta of 0.12 and low Leakage Current of 0.003mA, it operates b/w -55°C to 105°C, making it ideal for automotive applications requiring high ripple current handling capabilities.
C0805C103K5RACTU
KEMET C0805C103K5RACTU is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
T491B105K035AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL10B105KO8NNNC
Samsung Electro-mechanics
CL10B105KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 125°C. Ideal for surface mount applications in electronics requiring stable capacitance under varying temperatures.
TAJA106K016RNJV
KYOCERA AVX
TAJA106K016RNJV by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 16V URdc. It has a compact SMT package style, -55 to 125 °C operating temperature range, and 3000 mohm ESR. Ideal for applications requiring high reliability and stable capacitance in harsh environments.
M39006/25-0072
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
EEEFK1E101P
Panasonic EEEFK1E101P is a 100uF aluminum electrolytic capacitor with 25V rated DC voltage. It has a tan delta of 0.14 and leakage current of 0.025mA, suitable for applications requiring high ripple current handling up to 225mA. With a cylindrical package style and surface mounting feature, it is ideal for compact electronic devices in automotive and industrial sectors.
EEEHB1H4R7R
Panasonic EEEHB1H4R7R is a 4.7uF aluminum electrolytic capacitor with 50V URdc, suitable for surface mount applications. It offers low tan delta of 0.12 and leakage current of 0.003mA, making it ideal for high ripple current (23mA) environments in automotive electronics adhering to AEC-Q200 standards.
M39006/22-0377
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
04023C103KAT2A
04023C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, rated at 25V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for compact electronic devices requiring stable performance in harsh environments. Its multi-layer design and wraparound terminals ensure reliable connectivity and space-saving installation.
GRM188R71E104KA01D
Murata Manufacturing's GRM188R71E104KA01D is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
GCM188R71C105KA64D
Murata Manufacturing's GCM188R71C105KA64D is a 0603 SMT ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 16V rated DC voltage. It is ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating temperature range.
C5750X7R1H106M230KB
TDK
The TDK C5750X7R1H106M230KB is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring stable performance in a compact rectangular package.
C0603C102J5GACTU
The KEMET Corporation C0603C102J5GACTU is a ceramic capacitor with 0.001uF capacitance and 50V rated DC voltage. Featuring a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C making it ideal for high precision applications requiring stable performance in varying temperatures. With a compact SMT package style, this fixed capacitor is suitable for surface mount designs in electronic circuits.
C0603C105K4RACTU
KEMET C0603C105K4RACTU is a ceramic capacitor with 1uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (1.6mm x 0.8mm x 0.8mm) and high operating temperature range (-55°C to 125°C).
ESG475M400AH2AA
ESG475M400AH2AA by KEMET Corporation is a 4.7 uF aluminum electrolytic capacitor with a rated DC voltage of 400 V. It has a tan delta of 0.24 and a leakage current of 0.123 mA. This capacitor is commonly used in applications requiring high capacitance and low impedance, such as power supplies and audio amplifiers.
08053C105KAT2A
08053C105KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance, 25V URdc, X7R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and high operating temperature range of -55 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T543X336M050ATE040
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 33 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543D475M063AHE075
KEMET T543D475M063AHE075 is a 4.7uF, 63V tantalum capacitor with low ESR of 75mohm and tan delta of 0.1. Ideal for SMT applications, it operates b/w -55 to 105 °C, suitable for high ripple current circuits like power supplies and voltage regulators.
T543X226M063AHW075
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543X336M050AHE040
KEMET T543X336M050AHE040 is a 33uF, 50V tantalum capacitor with low ESR of 40mohm. Ideal for SMT applications, it has a tan delta of 0.1 and operates b/w -55 to 125°C. Suitable for power supplies, filtering circuits, and decoupling in various electronic devices.
T543X226M063AHE075
KEMET T543X226M063AHE075 is a 22uF, 63V tantalum capacitor with low Tan Delta of 0.1 and ESR of 75mohm. Ideal for applications requiring high ripple current handling up to 453.75mA in compact SMT designs for temperatures ranging from -55°C to 125°C.
T543D107K016ATE035
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543D226K025AHW075
T543D226K025AHW075 by KEMET Corporation is a TANTALUM CAPACITOR with 22 uF capacitance and 25 V rated DC voltage. It has a low Tan Delta of 0.1 and leakage current of 0.055 mA, making it suitable for applications requiring high reliability and stability in a compact size.
T543X156M063AHE035
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 15 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543O476M050ATE060
KEMET T543O476M050ATE060 is a 47uF, 50V tantalum capacitor with low ESR of 60mohm. Ideal for applications requiring high ripple current (560mA) and low leakage current (0.235mA). Commonly used in surface mount designs due to compact size and polarized terminals.
T543X476K035AHW030
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543D106K050AHW090
T543D106K050AHW090 by KEMET Corporation is a TANTALUM CAPACITOR with 10uF capacitance and 50V rated DC voltage. It has a low Tan Delta of 0.1 and leakage current of 0.05mA, making it suitable for applications requiring high ripple current and low ESR.
T543O477M016AHE020
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543V227K010AHW025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543X156K063AHW050
T543B337K2R5AHW035
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543X226K063ATW075
T543X337M010AHE010
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543D106K050AHW100
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543X337M016AHW025
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
T543X106M063ATS100
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 63 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved