Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET T322D106K035AT is a 10uF Tantalum Capacitor with 35V URdc. It features Tan Delta of 0.08 and Leakage Current of 0.005mA, suitable for applications requiring high reliability in temperatures ranging from -55 to 125°C.
Median Price
$7.140
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$0.629
100+ parts
1k+ parts
10k+ parts
RS Americas
$5.080
$3.810
$3.300
-
Farnell
$6.870
$3.800
$3.620
Mouser Electronics
$4.520
$4.120
RS (Exports)
$7.240
$5.790
TTI
$7.350
$5.660
Newark
$7.620
$4.570
$4.210
Voyager Components
$1.036
Nova Conductors
$3.665
Vyrian
Bristol Electronics
Modulus Dynamics
$0.109
Corohmni
$0.409
Ampacity Inc.
$0.530
Argo Parts USA
Netroflash
$3.482
$3.408
Continental Prestige Electronics
$4.400
$3.600
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Tantalum capacitors are known for their high reliability and stability, making them a good choice for critical applications.
Low tan delta indicates low dielectric losses in the capacitor, ensuring efficient performance.
Low leakage current ensures minimal power loss and reliable operation of the capacitor.
Axial packages are suitable for through hole mounting, providing secure and reliable connection to the circuit board.
The high capacitance value allows the capacitor to store a significant amount of charge, useful in filtering and energy storage applications.
With a high rated DC voltage, this capacitor can withstand higher voltages in the circuit without breakdown, making it suitable for various power applications.
Fixed Capacitors T322D106K035AT attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Tan Delta:
Terminal Finish:
Terminal Shape:
T322D106K035AT Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.80
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1554216004
Molex
WIRE AND CABLE;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Transys Electronics
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Bkc Semiconductors
EU2B-YS3203C
Idec
ROTARY SWITCH;
Good-ark Electronics
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
M39006/22-0350
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/22-0565
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1005X5R0J106M050BC
TDK
The TDK C1005X5R0J106M050BC is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM155R61A105KE15D
Murata Manufacturing
Murata Manufacturing's GRM155R61A105KE15D is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
CC0402KRX5R6BB105
Yageo's CC0402KRX5R6BB105 is a 1uF ceramic capacitor with X5R temperature coefficient, suitable for SMT mounting. It has a 10% tolerance, operates b/w -55 to 85°C, and rated at 10V. Ideal for compact electronic devices requiring stable capacitance in a small form factor.
VJ1206Y104KXACW1BC
Vishay Intertechnology
Vishay Intertechnology's VJ1206Y104KXACW1BC is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and operates b/w -55°C to 125°C, making it suitable for various applications requiring stable performance in a compact SMT package.
ECA1HHG4R7
Panasonic
ECA1HHG4R7 by Panasonic is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for AEC-Q200 standards. Featuring low Tan Delta of 0.12 and low Leakage Current of 0.003mA, it operates b/w -55°C to 105°C, making it ideal for automotive applications requiring high ripple current handling capabilities.
C1608X7R1H103K080AA
The TDK C1608X7R1H103K080AA is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55°C to 125°C, making it suitable for various electronic applications requiring stable performance in a compact size.
C0805C472K5RACTU
KEMET Corporation
The KEMET C0805C472K5RACTU is a ceramic capacitor with 0.0047uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
TMK105B7103KV-F
Taiyo Yuden
TMK105B7103KV-F by Taiyo Yuden is a ceramic capacitor with 0.01uF capacitance and 25V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, with ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
CC0402KRX7R6BB104
Yageo CC0402KRX7R6BB104 is a 0402 SMT ceramic capacitor with capacitance of 0.1uF, rated for 10V. It has X7R temperature characteristics and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and stable performance across -55 to 125°C range.
M39006/220565
Cornell Dubilier Electronics
M39006/220565 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 10uF capacitance, 50V URdc, and 0.04 Tan Delta. It has a leakage current of 0.001mA and operates b/w -55 to 125 °C. Ideal for applications requiring high ripple current handling in through-hole mounting setups.
C3216X5R1V226M160AC
TDK C3216X5R1V226M160AC is a SMT ceramic capacitor with 22uF capacitance, 35V URdc, and X5R temp. coef. Ideal for surface mount applications in electronics due to its compact size and high temp. rating of -55 to 85 °C.
EEHZA1V470P
Panasonic EEHZA1V470P is a 47uF aluminum electrolytic capacitor with 35V rated DC voltage. It features low ESR of 60mohm, tan delta of 0.12, and ripple current of 195mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and solid polymer dielectric material.
CL05A105KP5NNNC
Samsung Electro-mechanics
CL05A105KP5NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications due to its compact size of 1x0.5x0.55mm, making it suitable for various electronic devices.
EEEFK1H470P
Panasonic EEEFK1H470P is a 47uF aluminum electrolytic capacitor with 50V URdc. It has a tan delta of 0.10 and leakage current of 0.0235mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
T491D106K050AT
KEMET T491D106K050AT is a 10uF, 50V tantalum capacitor with low Tan Delta of 0.06 and ESR of 800mohm. Ideal for applications requiring high ripple current (173mA) and operating temperatures from -55 to 125°C in surface mount designs.
CGA2B3X7R1E104K050BB
TDK's CGA2B3X7R1E104K050BB is a SMT ceramic capacitor with capacitance of 0.1uF, rated at 25V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard.
M39006/25-0248
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0603C104M5RACTU
KEMET C0603C104M5RACTU is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±20% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact size of 1.6x0.8x0.8mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T322E336K025AT
T322E336K025AT by KEMET Corporation is a TANTALUM CAPACITOR with 33uF capacitance and 25V rated DC voltage. It has a low Tan Delta of 0.06 and operates in temperatures ranging from -55 to 125 °C. Ideal for applications requiring high capacitance and reliable performance.
T322F226K050AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322A474K025AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322D106K035AS
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322E336K020AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 33 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322C226K006AS
T322C226K006AS by KEMET Corp is a TANTALUM CAPACITOR with capacitance of 22uF and rated DC voltage of 6V. It has a tan delta of 0.06 and leakage current of 0.0011mA, making it suitable for applications requiring high reliability and stability in temperature range from -55°C to 125°C.
T322D156K025AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 15 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322B565K015AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 5.6 uF; Rated DC Voltage (URdc): 15 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322D106K035AS7200
T322C475K035AT7200
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322B105K035AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322D226K020AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322B106K010AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322C106K025AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322F107K020AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322F476K035AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322E476K025AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322E106K050AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322E107K010AT
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
T322D106K035AT7200
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved