Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET Corporation's CA064C101K5GACTU is a 4-function isolated C network capacitor array with capacitance of 0.0001uF, rated for 50V. It operates b/w -55 to 125 °C, with a temperature coefficient of 30ppm/°C. Ideal for surface mount applications requiring compact rectangular package design.
Median Price
$0.134
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.430
100+ parts
$0.142
1k+ parts
$0.120
10k+ parts
$0.107
TTI
-
$0.140
Verical
$0.115
Arrow
$0.127
Nova Conductors
Ampacity Inc.
$0.082
Corohmni
$0.110
Perfect Parts
Authorized Procurement Solutions
Netroflash
Having 4 functions in one package allows for more efficient use of space and simplifies the circuit design.
Rectangular package shape is commonly used and easy to mount, making it versatile for various applications.
The plastic packaging with 7 inch reel makes it convenient for automated assembly processes in manufacturing.
Isolated C network allows for better signal integrity and noise reduction in the circuit.
Having 8 terminals provides flexibility in connecting to other components and allows for more complex circuit configurations.
Wraparound terminals ensure secure connections and easy soldering during assembly.
A negative tolerance of 10% ensures that the actual capacitance will not be lower than the specified value, providing reliable performance.
C0G temperature characteristics indicate a high stability over temperature changes, making it suitable for precision applications.
With a maximum operating temperature of 125°C, this capacitor array can withstand high temperature environments without compromising performance.
The small terminal pitch of 0.8mm allows for compact designs and easy placement on circuit boards.
The array/network capacitor type provides multiple capacitance values in one package, offering versatility in circuit design.
With a minimum operating temperature of -55°C, this capacitor array is suitable for use in a wide range of temperature conditions.
The low temperature coefficient of 30ppm/C ensures minimal change in capacitance over temperature variations, maintaining stability in the circuit.
Matte tin terminal finish provides good solderability and prevents oxidation, ensuring reliable connections in the circuit.
With a maximum seated height of 0.8mm, this capacitor array is compact and suitable for applications with space constraints.
A width of 3.2mm allows for easy placement on the PCB and saves space in compact electronic designs.
The surface mounting feature simplifies the assembly process and enables easy mounting on the PCB.
A length of 1.6mm makes this capacitor array compact and suitable for applications where space is limited.
A positive tolerance of 10% ensures that the actual capacitance will not exceed the specified value, providing consistent performance.
With a capacitance of 0.0001uF, this capacitor array is suitable for applications that require low capacitance values.
With a rated DC voltage of 50V, this capacitor array can handle moderate voltage levels in the circuit.
Capacitor Arrays & Networks CA064C101K5GACTU attributes and parameters. Explore more Capacitor Arrays & Networks devices from KEMET Corporation
Capacitance:
Capacitor Type:
JESD-609 Code:
Length:
Mounting Feature:
Negative Tolerance:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Code:
Package Shape:
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Maximum Seated Height:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Pitch:
Terminal Shape:
Width:
CA064C101K5GACTU Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.25.00.45
SB
8532.25.00.50
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
CA064X103K1RACTU
KEMET Corporation
KEMET Corporation's CA064X103K1RACTU is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. With a capacitance of 0.01uF and rated DC voltage of 100V, it is ideal for surface mount applications in electronics requiring a temperature coefficient of 15% ppm/°C.
W2A4ZC104MAT2A
KYOCERA AVX
W2A4ZC104MAT2A by KYOCERA AVX is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. It has a capacitance of 0.1 uF, rated DC voltage of 10V, and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact size and high temperature stability.
W2A25C104K4T2A
W2A25C104K4T2A by KYOCERA AVX is a ceramic capacitor array with 2 functions, isolated C network type, and 4 terminals. It operates b/w -55°C to 125°C with capacitance of 0.1uF. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 50V rated DC voltage.
CKCA43C0G1H470K100AA
TDK
TDK's CKCA43C0G1H470K100AA is a 4-function ceramic capacitor array with isolated C network. It offers 0.000047uF capacitance, 50V URdc, and 30ppm/°C temp coef. Ideal for surface mount applications in electronics requiring compact size and high reliability.
474K500CS6G
Cornell Dubilier Electronics
474K500CS6G by Cornell Dubilier Electronics is a METALLIZED FILM capacitor array with 4 elements in a BUSSED C NETWORK configuration. It has a capacitance of 0.47 uF, rated for 500 V, and operates b/w -55 to 125 °C. Ideal for SURFACE MOUNT applications requiring compact DIP package style with GULL WING terminals.
CA0612JRNPO9BN101
Yageo
Yageo's CA0612JRNPO9BN101 is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. Ideal for SMT applications, it offers a capacitance of 0.0001uF, rated at 50V URdc. With temperature coefficient of 30ppm/°C and operating range from -55 to 125 °C, it suits various electronic devices.
W2A41A330KAT2A
W2A41A330KAT2A by KYOCERA AVX is a 4-function capacitor array with capacitance of 0.000033 uF and rated DC voltage of 100V. It features isolated C network type, C0G temperature characteristics, and matte tin terminal finish. Ideal for surface mount applications in electronics requiring precise capacitance values within -55 to 125 °C operating temperatures.
W3A45C223M4T2A
KYOCERA AVX's W3A45C223M4T2A is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. Ideal for surface mount applications, it has a capacitance of 0.022 uF and operates b/w -55 to 125 °C. Suitable for AEC-Q200 standards in automotive electronics.
CA064C104K4RACAUTO
CA064C104K4RACAUTO by KEMET: 4-function isolated C network capacitor array with 0.1uF capacitance, 10% tolerance, and X7R temp characteristics. AEC-Q200 rated for automotive applications with -55 to 125 °C operating range. Ideal for surface mount designs requiring compact rectangular package.
405K100CS4G
405K100CS4G by Cornell Dubilier Electronics is a METALLIZED FILM capacitor array with 3 elements, each having a capacitance of 4 uF and rated DC voltage of 100 V. It is used in BUSSED C NETWORK applications, featuring GULL WING terminals for surface mounting method.
CA0508KRNPO9BN220
Yageo CA0508KRNPO9BN220 is a C0G ceramic capacitor array with 4 functions, 10% tolerance, and 0.000022 uF capacitance. Ideal for surface mount applications in isolated C network circuits with -55 to 125 °C operating temperature range.
CA0612KRNPO9BN330
Yageo's CA0612KRNPO9BN330 is a C0G ceramic capacitor array with 4 functions, 8 terminals, and 0.000033 uF capacitance. Ideal for surface mount applications, it has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C.
405K100CS4G-FA
405K100CS4G-FA by Cornell Dubilier Electronics is a METALLIZED FILM capacitor array with 3 elements in a BUSSED C NETWORK configuration. It has a capacitance of 4 uF, rated for 100 V, and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring compact DIP package style with GULL WING terminals.
CA0612KRX7R9BB103
Yageo's CA0612KRX7R9BB103 is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. It operates b/w -55 to 125 °C with a capacitance of 0.01 uF and rated DC voltage of 50 V. Ideal for surface mount applications requiring compact design and high temperature stability.
CKCA43X7R1C104M100AA
The TDK CKCA43X7R1C104M100AA is a surface mount capacitor array with 4 functions, 0.1 uF capacitance, and 16 V rated DC voltage. It features X7R temperature characteristics and is ideal for isolated C network applications. With a compact rectangular package measuring 3.2mm x 1.6mm x 1mm, it offers reliable performance in a variety of electronic devices.
CA0612KRNPO9BN680
Yageo's CA0612KRNPO9BN680 is a C0G ceramic capacitor array with 4 functions, 8 terminals, and 0.000068 uF capacitance. Ideal for surface mount applications, it has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C.
MCN1001X104KTB
Vishay Intertechnology
Vishay Intertechnology's MCN1001X104KTB is a rectangular package capacitor array with 9 elements in a bussed C network configuration. It has a capacitance of 0.1 uF, rated for 50V DC voltage, and operates b/w -55°C to 125°C. Ideal for through-hole mounting applications requiring high temperature stability and flat terminal shape.
CA064X102K2RACTU
CA064X102K2RACTU by KEMET is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. It has a capacitance of 0.001uF, rated DC voltage of 200V, and operates b/w -55 to 125°C. Ideal for surface mount applications requiring compact size and high reliability in electronic circuits.
20106D1C102K5P
Vishay Intertechnology 20106D1C102K5P is a capacitor array with 5 elements, rated at 0.001 uF capacitance and 50 V URdc. Featuring a negative tolerance of 10%, it operates b/w -55 to 125 °C, making it ideal for applications requiring precise capacitance values in a compact design.
CA064X103K2RACTU
KEMET Corporation's CA064X103K2RACTU is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. It has a capacitance of 0.01 uF, rated DC voltage of 200V, and temperature coefficient of 15% ppm/°C. Ideal for surface mount applications in electronics requiring compact design and reliable performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CA0612JRNPO9BN220
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000022 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CA0612KRX7R8BB473
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CA0612JRNPO9BN221
CA0612JRNPO9BN221 by Yageo is a ceramic capacitor array with 4 functions and isolated C network. It has a capacitance of 0.00022 uF, rated DC voltage of 50 V, and temperature coefficient of 30ppm/°C. It is commonly used in surface mount applications for its compact size and high operating temperature range.
CA0612KRX7R9BB222
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0022 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CA0612JRNPO9BN470
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000047 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CA064C104K4RACTU
CA064C104K4RACTU by KEMET is a 4-function isolated C network capacitor array with 0.1uF capacitance and 16V URdc. It has a temperature coef of 15% and operates b/w -55 to 125 °C, making it suitable for surface mount applications requiring compact rectangular packages. With a terminal pitch of 0.8mm and matte tin finish over nickel, it offers precise performance in various electronic circuits.
CA0612KRX7R7BB103
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CA0612KRX7R7BB104
Yageo CA0612KRX7R7BB104 is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. It has a capacitance of 0.1uF, rated at 16V DC voltage, and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring compact rectangular package with SMT style and matte tin finish.
CA0612KRX7R9BB102
Yageo CA0612KRX7R9BB102 is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. It has a capacitance of 0.001 uF, rated for 50V DC voltage, and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact size and high temperature stability.
CA064C103K5RACTU
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Package Shape: RECTANGULAR PACKAGE;
CA0612KRX7R9BB472
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0047 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CA064X102K2RACAUTO
CA064X102K2RACAUTO by KEMET is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. It has a capacitance of 0.001 uF, rated for 200V DC voltage, and operates b/w -55 to 125 °C. Ideal for automotive applications meeting AEC-Q200 standard requirements.
CA0612KRNPO9BN101
Yageo's CA0612KRNPO9BN101 is a C0G ceramic capacitor array with 4 functions, 8 terminals, and 0.0001 uF capacitance. Ideal for SMT applications, it has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C.
ARRAY/NETWORK CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CA064X222K2RACTU
KEMET Corporation's CA064X222K2RACTU is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. With capacitance of 0.0022 uF and rated DC voltage of 200V, it suits surface mount applications in electronics for its X7R temperature characteristics and -55 to 125 °C operating range.
CA064X223K1RACAUTO
KEMET Corporation's CA064X223K1RACAUTO is a ceramic capacitor array with 4 functions, isolated C network type, and 8 terminals. It has a capacitance of 0.022 uF, rated for 100V DC voltage, and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics meeting AEC-Q200 standards.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved