Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET C1812C145J5JLC7805 is a ceramic capacitor with 1.4uF capacitance and 50V rated DC voltage. It has a negative tolerance of 5% and operates b/w -55 to 125 °C. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Median Price
$4.187
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$3.200
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$1.733
$1.594
Newark
$6.200
$3.630
$3.150
$3.020
Mouser Electronics
$2.920
DigiKey
$7.830
$4.636
PEI Genesis
Farnell
$2.730
$2.460
Master Electronics
$2.540
Verical
$2.852
Element14
$4.210
Arrow
Nova Conductors
$2.725
Vyrian
Cyclops Electronics Ltd
Rapid Electronics
$2.771
IBS Electronics
$2.834
AZTECH Wire
$0.630
$0.610
$0.590
$0.580
Ampacity Inc.
$0.800
Semicontronic
$0.780
$0.776
Continental Prestige Electronics
$1.980
Argo Parts USA
Microchip USA
$31.070
$30.880
$30.780
$30.690
Authorized Procurement Solutions
Netroflash
$2.670
$2.589
$2.534
Ceramic is a reliable and stable dielectric material, making the capacitor suitable for various applications.
Multi-layer design allows for higher capacitance in a smaller package, making it space-efficient.
With a high maximum operating temperature, this capacitor is suitable for use in a wide range of environments.
Offers a specific capacitance value which may be required for certain applications.
Capable of handling a rated DC voltage of 50V, making it versatile for different voltage requirements.
Fixed Capacitors C1812C145J5JLC7805 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
C1812C145J5JLC7805 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - KONNEKT Assembly Line Transfer 15/Feb/2023
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Excel (Suzhou) Semiconductor
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Continental Device India
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1554216002
Molex
WIRE AND CABLE;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
CGA3E1X7R1E105K080AC
TDK
TDK's CGA3E1X7R1E105K080AC is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. Its compact SMT package style and multi-layer design ensure reliable performance in various electronic circuits.
M39006/25-0220
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
ESH475M050AC3AA
KEMET Corporation
ESH475M050AC3AA by KEMET is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for applications requiring a max operating temperature of 105°C. It features a low tan delta of 0.12 and leakage current of 0.003mA, making it ideal for use in circuits with ripple currents up to 30mA.
T491D106K025AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL31B106KBHNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B106KBHNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability.
CL21A226MAQNNNE
Samsung Electro-mechanics CL21A226MAQNNNE is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high capacitance and voltage requirements.
12065C104K4T2A
KYOCERA AVX
12065C104K4T2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated DC voltage of 50V, and X7R temperature characteristics. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact dimensions of 3.2mm x 1.6mm x 0.94mm.
06035C103JAT2A
06035C103JAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125 °C.
BFC238320683
Vishay Intertechnology
Vishay Intertechnology BFC238320683 is a film capacitor with 0.068 uF capacitance, 630 V rated DC voltage, and 220 V rated AC voltage. Ideal for applications requiring a fixed capacitor with polypropylene dielectric material in through-hole mounting style. Operating temperature range from -55 to 105 °C makes it suitable for various electronic circuits.
GRT155R71E103KE01D
Murata Manufacturing
Murata Manufacturing's GRT155R71E103KE01D is a ceramic capacitor with 0.01uF capacitance, X7R temperature characteristics, and 25V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 standard compliance and compact 0402 size.
M39006/22-0351
Vishay Intertechnology's M39006/22-0351 is a TANTALUM CAPACITOR with 47uF capacitance, 50V URdc, and 0.11 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (311.85mA) and low leakage current (0.001mA). Suitable for temperatures ranging from -55 to 125 °C in through-hole mounting setups.
M39006/22-0639
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0402C220J5GACTU
KEMET Corporation's C0402C220J5GACTU is a ceramic capacitor with 0.000022 uF capacitance, rated for 50V. With a temperature coefficient of 30ppm/°C and operating range from -55 to 125 °C, it's ideal for SMT applications requiring precise voltage regulation in compact spaces.
C0805C222K5RACTU
KEMET C0805C222K5RACTU is a ceramic capacitor with 0.0022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
562R10TSD10
Vishay Intertechnology's 562R10TSD10 is a ceramic capacitor with 0.001 uF capacitance and 1000 V rated DC voltage. With a temperature coefficient of 7.5% and -55 to 105 °C operating range, it suits applications requiring stable performance in varying conditions. The radial package style and matte tin over nickel finish make it ideal for through hole mounting in electronic circuits.
T491D106K050AT
KEMET T491D106K050AT is a 10uF, 50V tantalum capacitor with low Tan Delta of 0.06 and ESR of 800mohm. Ideal for applications requiring high ripple current (173mA) and operating temperatures from -55 to 125°C in surface mount designs.
CC0402KRX7R9BB104
Yageo
Yageo CC0402KRX7R9BB104 is a SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
CGA6P3X8R1E475K250AB
TDK's CGA6P3X8R1E475K250AB is a ceramic capacitor with 4.7uF capacitance and 25V rated DC voltage. It features X8R temperature characteristics, -55 to 150 °C operating range, and AEC-Q200 standard compliance. Ideal for surface mount applications in automotive electronics due to its compact size and high reliability.
GCM188R71H224KA64D
Murata Manufacturing's GCM188R71H224KA64D is a ceramic capacitor with 0.22 uF capacitance, 50V URdc, X7R temp characteristics. It is SMT package for AEC-Q200 standard automotive applications.
C0805C104K5RACTU
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C1812C104K5RACTU
KEMET C1812C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
C1812C681JFGACTU
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00068 uF; Rated DC Voltage (URdc): 1500 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C1812C105K5RACTU
KEMET C1812C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C1812C104KDRACTU
KEMET C1812C104KDRACTU is a ceramic capacitor with 0.1uF capacitance and 1000V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.
C1812X474KARACAUTO
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C1812C103KGRACTU
C1812C103KGRACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 0.01 uF and rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This surface mount capacitor is commonly used in electronic circuits for various applications.
C1812X104KDRACTU
KEMET C1812X104KDRACTU is a ceramic capacitor with 0.1uF capacitance and 1000V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 availability.
C1812C102KHRACTU
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 3000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C1812V104KDRACTU
KEMET C1812V104KDRACTU is a ceramic capacitor with 0.1uF capacitance and 1000V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 4.5mm x 3.2mm x 1.7mm in rect package shape.
C1812C102KGRACTU
The KEMET C1812C102KGRACTU is a ceramic capacitor with capacitance of 0.001 uF and rated DC voltage of 2000 V. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high voltage tolerance. Its compact rectangular package and multi-layer design ensure efficient space utilization in various electronic circuits.
C1812F104K2RACTU
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C1812C475K5RACTU
KEMET C1812C475K5RACTU is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C1812C104KDRACAUTO
KEMET C1812C104KDRACAUTO is a ceramic capacitor with 0.1uF capacitance, 1000V URdc, X7R temp code. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating range. SMT package style, 2 terminals, and compact dimensions make it suitable for surface mount installations.
C1812W104KDRACTU
KEMET C1812W104KDRACTU is a ceramic capacitor with 0.1uF capacitance and 1000V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C1812C104J2GACAUTO
C1812C104J2GACAUTO by KEMET is a ceramic capacitor with 0.1uF capacitance, rated for 200V DC voltage. It has a compact size of 4.5mm x 3.2mm x 2mm and operates b/w -55°C to 125°C, making it ideal for automotive applications requiring high reliability under harsh conditions like engine control units and power supplies.
C1812X104KDRACAUTO
KEMET C1812X104KDRACAUTO is a ceramic capacitor with 0.1uF capacitance, 1000V URdc, X7R temp code. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating range. SMT package style, 10% tolerance, and multi-layer design make it suitable for compact surface mount designs.
C1812C106K3RACTU
KEMET C1812C106K3RACTU is a ceramic capacitor with 10uF capacitance, 25V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
C1812N222J1GSL
KEMET C1812N222J1GSL is a ceramic capacitor with 0.0022uF capacitance, rated at 100V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for military applications meeting MIL-PRF-55681 standard, it features SMT package style and wraparound terminals in a compact 1812 size code.
C1812J105K5RACAUTO
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C1812C102KGRACAUTO
KEMET C1812C102KGRACAUTO is a ceramic capacitor with 0.001uF capacitance, rated for 2000V DC voltage. It features X7R temperature characteristics and -55 to 125°C operating range, suitable for automotive applications meeting AEC-Q200 standard. With compact SMT package (4.5x3.2x1.4mm), it offers high reliability and low temperature coefficient of 15ppm/°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved