Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET C0805C104K5RAC7215 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance. Ideal for surface mount applications in electronics due to its compact size of 2x1.25x0.78mm and operating range from -55°C to 125°C.
Median Price
$0.170
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.150
100+ parts
$0.053
1k+ parts
$0.038
10k+ parts
$0.034
DigiKey
$0.190
$0.067
$0.050
-
Nova Conductors
$0.080
Vyrian
Component Sense
Connector Distribution Corp
Right Parts Inc.
Lantek
Advanced Electronics
$0.028
$0.026
Continental Prestige Electronics
$0.078
Argo Parts USA
Netroflash
Modulus Dynamics
$0.089
$0.088
$0.085
Ampacity Inc.
$0.128
Semicontronic
$0.125
$0.124
Decca Corp
$0.278
$0.272
$0.270
Aztec Data Supply Inc.
$0.528
Corohmni
$0.545
GreenTree Electronics
Robosynatics
$86.607
Lucentia Tech
Ceramic is a reliable and durable material that ensures stable performance in a variety of applications.
The rectangular shape allows for easy and efficient placement on circuit boards, saving valuable space.
The multi-layer design provides higher capacitance in a compact size, making it ideal for dense circuit designs.
This packaging method ensures secure and organized transport and storage of the capacitors.
The 0603 size code indicates a standard industry size, making these capacitors easily interchangeable and widely available.
With two terminals, these capacitors can be easily connected in a circuit, simplifying installation and maintenance.
The surface mount technology (SMT) package style allows for automated assembly, reducing production time and cost.
The wraparound terminal shape provides a secure connection, minimizing the risk of disconnection or signal loss.
The 10% negative tolerance ensures consistency in capacitance values, promoting reliable performance in various conditions.
The X7R temperature characteristics code indicates stable capacitance over a wide temperature range, enhancing versatility.
With a maximum operating temperature of 125°C, these capacitors can withstand high-temperature environments without performance degradation.
Ceramic capacitors are known for their stability, low loss, and high insulation resistance, making them suitable for various applications.
The -55°C minimum operating temperature allows for reliable performance in cold environments, expanding the capacitor's utility.
The 15% temperature coefficient ensures minimal capacitance variation with temperature changes, maintaining circuit stability.
The matte tin finish with a nickel barrier provides excellent solderability and corrosion resistance for a durable connection.
The low height of 0.78mm allows for a compact design, suitable for applications with space constraints.
The narrow width of 1.25mm enables a high component density on PCBs, optimizing circuit layout efficiency.
The surface mounting feature simplifies assembly processes and enhances the reliability of connections in modern electronics.
The short length of 2mm contributes to a compact form factor, ideal for miniaturized electronic devices.
The 10% positive tolerance ensures that the capacitance values of these capacitors fall within a predictable range, ensuring consistent performance.
The capacitance value of 0.1uF is suitable for filtering, decoupling, and timing applications in various electronic circuits.
The 50V rated DC voltage allows for safe operation in low to moderate voltage circuit applications.
Fixed Capacitors C0805C104K5RAC7215 attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
C0805C104K5RAC7215 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Specification chg 11/MAR/2022
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
2N7002,215
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Tak Cheong Electronics Holdings
Hitano Enterprise
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM358AN
Philips Semiconductors
National Semiconductor
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
C1608X7R1V105K080AC
TDK
The TDK C1608X7R1V105K080AC is a ceramic capacitor with 1uF capacitance and 35V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
VJ1206Y104KXACW1BC
Vishay Intertechnology
Vishay Intertechnology's VJ1206Y104KXACW1BC is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and operates b/w -55°C to 125°C, making it suitable for various applications requiring stable performance in a compact SMT package.
CL21A106KPFNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics' CL21A106KPFNNNE is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high reliability.
T491B106K016AT
KEMET Corporation
KEMET T491B106K016AT is a 10uF, 16V tantalum capacitor with low Tan Delta of 0.06 and high ripple current of 82mA. Ideal for applications requiring compact SMT components with high reliability in temperatures ranging from -55 to 125°C.
LMK105BJ105KV-F
Taiyo Yuden
LMK105BJ105KV-F by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C. Ideal for surface mount applications requiring compact, high-performance capacitors with a negative tolerance of 10%.
C0402C106M9PACTU
The KEMET Corporation C0402C106M9PACTU is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55 to 85°C, making it suitable for various SMT applications requiring stable capacitance in compact designs. With a rectangular package shape and matte tin over nickel terminal finish, this multi-layer capacitor is ideal for space-constrained electronic devices.
GRM155R60J475ME87D
Murata Manufacturing
Murata Manufacturing's GRM155R60J475ME87D is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and compact SMT package style. Ideal for applications requiring high reliability in a small form factor like consumer electronics and automotive systems.
CGA6M3X7S2A475K200AE
TDK's CGA6M3X7S2A475K200AE is a rectangular package ceramic capacitor with a capacitance of 4.7 uF and rated DC voltage of 100 V. It has a temperature coefficient of 22% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard.
0603B104K500CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C1206C105K3RACTU
C1206C105K3RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 1 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
EEEFK1H471AM
Panasonic
Panasonic EEEFK1H471AM is a 470uF Aluminum Electrolytic Capacitor with 50V URdc. It features Tan Delta of 0.12, Leakage Current of 0.235mA, and Ripple Current of 1207.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
CL05B104KO5NNNC
Samsung Electro-mechanics' CL05B104KO5NNNC is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
GRM188R61H225KE11D
GRM188R61H225KE11D by Murata Manufacturing is a ceramic capacitor with 2.2uF capacitance and 50V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for surface mount applications in various electronic devices due to its compact size and high reliability.
EEVFK1J221Q
Panasonic EEVFK1J221Q is a 220uF Aluminum Electrolytic Capacitor with 63V URdc. It features low Tan Delta of 0.08 and high Ripple Current of 600mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
C5750X7R1H106K230KB
TDK C5750X7R1H106K230KB is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
CC0603ZRY5V9BB104
Yageo
Yageo CC0603ZRY5V9BB104 is a SMT ceramic capacitor with 0.1uF capacitance, 50V URdc, and -30 to 85°C operating range. Ideal for compact electronic devices requiring high capacitance in a small footprint.
ECA1HHG4R7
ECA1HHG4R7 by Panasonic is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for AEC-Q200 standards. Featuring low Tan Delta of 0.12 and low Leakage Current of 0.003mA, it operates b/w -55°C to 105°C, making it ideal for automotive applications requiring high ripple current handling capabilities.
C5750X7S2A226M280KB
TDK C5750X7S2A226M280KB is a ceramic capacitor with 22uF capacitance and 100V rated DC voltage. Featuring X7S temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications due to its compact size of 5.7x5x2.8mm and wraparound terminals.
C0603C104K5RECAUTO
KEMET C0603C104K5RECAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT mounting in a compact 1.6x0.8x0.8mm package.
CGA2B3X7R1E104K050BB
TDK's CGA2B3X7R1E104K050BB is a SMT ceramic capacitor with capacitance of 0.1uF, rated at 25V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C0805C104K5RACTU
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
C0805C103K5RACTU
KEMET C0805C103K5RACTU is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C0805C106K8PACTU
KEMET C0805C106K8PACTU is a ceramic capacitor with 10uF capacitance, 10% tolerance, and X5R temperature coefficient. Ideal for SMT applications, it operates b/w -55°C to 85°C, making it suitable for various electronic devices requiring stable performance in a compact package.
C0805C474K4RACTU
The KEMET C0805C474K4RACTU is a ceramic capacitor with 0.47uF capacitance and 16V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic circuits due to its compact rectangular package design.
C0805C104K5RACAUTO
KEMET C0805C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and wraparound terminals.
C0805C104M5RACTU
C0805C104M5RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This surface mount capacitor is commonly used in electronic circuits for filtering and energy storage purposes.
C0805C106K4PACTU
KEMET C0805C106K4PACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X5R temperature coefficient. Ideal for SMT applications due to its rectangular package shape and wraparound terminals. Operating range from -55°C to 85°C makes it suitable for various electronic devices.
C0805C104J5RACTU
KEMET C0805C104J5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±5% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
C0805C102K5RACTU
KEMET C0805C102K5RACTU is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.001 uF capacitance. Ideal for surface mount applications in electronics, it operates b/w -55 to 125 °C with a rated DC voltage of 50 V.
C0805C472K5RACTU
The KEMET C0805C472K5RACTU is a ceramic capacitor with 0.0047uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
C0805C105K5RACTU
KEMET C0805C105K5RACTU is a ceramic capacitor with 1uF capacitance, rated at 50V. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring compact rectangular package design.
C0805C222K5RACTU
KEMET C0805C222K5RACTU is a ceramic capacitor with 0.0022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
C0805C105K4RACTU
The KEMET C0805C105K4RACTU is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over varying temperatures.
C0805C104K5RAC7210
KEMET C0805C104K5RAC7210 is a ceramic capacitor with 10% tolerance, X7R temperature characteristics, and 0.1uF capacitance. Ideal for surface mount applications in electronics due to its compact size (2x1.25x.78mm) and 50V rated DC voltage.
C0805C106K8RACTU
KEMET C0805C106K8RACTU is a ceramic capacitor with 10uF capacitance and 10% tolerance. It operates b/w -55 to 125°C, suitable for SMT mounting in various electronic applications requiring stable performance at different temperatures. The rectangular package with matte tin finish makes it ideal for compact designs.
C0805C473K5RACTU
KEMET C0805C473K5RACTU is a ceramic capacitor with 0.047uF capacitance, 50V URdc, and X7R temp characteristics. Ideal for SMT applications due to its rectangular package shape and matte tin over nickel terminal finish. Suitable for use in electronics requiring stable capacitance across temperatures from -55 to 125 °C.
C0805C102J5GACTU
The KEMET Corporation C0805C102J5GACTU is a ceramic capacitor with capacitance of 0.001 uF and rated DC voltage of 50V. With a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C making it ideal for applications requiring stable performance in varying temperatures. Its SMT package style and compact dimensions make it suitable for surface mount designs in various electronic devices.
C0805C105K3RACTU
KEMET C0805C105K3RACTU is a ceramic capacitor with 1uF capacitance, 25V URdc, and X7R temperature characteristics. Ideal for SMT applications due to its rectangular package shape and wraparound terminals. Operating range from -55°C to 125°C makes it suitable for various electronic devices.
C0805C104K1RACTU
The KEMET C0805C104K1RACTU is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic circuits due to its compact SMT package style.
C0805C104K5RAC
Cornell Dubilier Electronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved