Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CERAMIC CAPACITOR; Capacitance: .027 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Temperature Characteristics Code: X7R;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fixed Capacitors 05HV23B273ZN attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Manufacturer Series:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Series:
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Pitch:
Width:
05HV23B273ZN Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
GRM155R61C105KA12D
Murata Manufacturing
The Murata Manufacturing GRM155R61C105KA12D is a ceramic capacitor with 1uF capacitance, rated for 16V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Commonly used in SMT applications due to its small size (1x0.5x0.5mm) and multi-layer design for compact electronics.
12103D226MAT2A
KYOCERA AVX
12103D226MAT2A by KYOCERA AVX is a ceramic capacitor with a capacitance of 22 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
12105C475K4Z2A
12105C475K4Z2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact, high-performance capacitors with negative tolerance of 10%.
C0402C104K8PACTU
KEMET Corporation's C0402C104K8PACTU is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and wraparound terminals.
08051C182KAT2A
08051C182KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.0018uF capacitance and 100V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, ideal for applications requiring compact size and high reliability in electronic circuits.
C5750X7R1H106M230KB
TDK
The TDK C5750X7R1H106M230KB is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring stable performance in a compact rectangular package.
C3216X5R1H106K160AB
The TDK C3216X5R1H106K160AB is a ceramic capacitor with 10uF capacitance, rated for 50V. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its small size (3.2x1.6x1.6mm) and wraparound terminals, commonly used in electronics requiring stable capacitance under varying temperatures.
1210B475K500CT
Walsin Technology
1210B475K500CT by Walsin Technology is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high reliability and stability.
C0805C225K4RACTU
KEMET C0805C225K4RACTU is a ceramic capacitor with 2.2uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.
CL05A106MP5NUNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL05A106MP5NUNC is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high reliability and stability.
CL21B105KBFNNNE
Samsung Electro-mechanics' CL21B105KBFNNNE is a ceramic capacitor with 1uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
EEEFK1C101P
Panasonic EEEFK1C101P is a 100uF aluminum electrolytic capacitor with 16V rated DC voltage. It has tan delta of 0.16 and leakage current of 0.016mA, suitable for AEC-Q200 standard automotive applications due to its compact SMT package style and high ripple current handling capability of 180mA.
CL21C101JBANNNC
Samsung Electro-mechanics' CL21C101JBANNNC is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high precision and stability in various electronic devices.
CC0603KRX7R7BB105
Yageo
Yageo's CC0603KRX7R7BB105 is a 1uF ceramic capacitor with X7R temperature characteristics, suitable for a wide temperature range from -55 to 125°C. It has a 16V rated DC voltage and ±10% tolerance, making it ideal for various applications requiring stable capacitance values in compact SMT designs. The rectangular package measures 1.6mm x 0.8mm x 0.8mm, featuring wraparound terminals with matte tin finish for easy surface mounting.
T491A475K016AT
KEMET T491A475K016AT is a 4.7uF, 16V tantalum capacitor with low ESR of 4000mohm and tan delta of 0.06. Ideal for applications requiring high ripple current (55mA) in compact SMT designs with operating temperatures from -55 to 125°C.
22205C106KAT2A
KYOCERA AVX 22205C106KAT2A is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, X7R temp code. Ideal for surface mount applications, it offers -55 to 125 °C operating range and ±10% tolerance.
12105C475KAZ2A
12105C475KAZ2A by KYOCERA AVX is a rectangular package ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
CGA3E2X8R1E104K080AA
TDK's CGA3E2X8R1E104K080AA is a ceramic capacitor with capacitance of 0.1uF, rated for 25V DC voltage. It has X8R temperature characteristics, -55 to 150°C operating range, and ±10% tolerance. Ideal for surface mount applications in automotive electronics meeting AEC-Q200 standard.
06035C105KAT2A
KYOCERA AVX 06035C105KAT2A is a SMT ceramic capacitor with 1uF capacitance, rated for 50V. It has X7R temperature characteristics and -55 to 125 °C operating range. Ideal for applications requiring compact, high-performance capacitors in surface mount technology.
C3225X7S1H106K250AE
TDK C3225X7S1H106K250AE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X7S temperature characteristics, -55 to 125 °C operating range, and 22% temp coef. Ideal for SMT applications requiring compact size, it features wraparound terminals in a rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved