Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; Maximum Operating Temperature: 105 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Resion
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Nova Conductors
Corohmni
$0.311
Advanced Electronics
$1.114
$1.014
$0.913
AZTECH Wire
$18.095
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Variable Inductors 4907-S attributes and parameters. Explore more Variable Inductors devices from Jw Miller Magnetics
Inductor Type:
Inductor Application:
Minimum Inductance (L):
Maximum Inductance (L):
No. of Functions:
Package Shape:
Shielded:
Surface Mount:
Minimum Operating Temperature:
Maximum Operating Temperature:
No. of Terminals:
Terminal Shape:
Terminal Position:
4907-S Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
4902-S
Bourns
The Bourns 4902-S is a shielded variable inductor with radial terminal placement. It has a min inductance of 0.059 uH, nominal inductance of 0.065 uH, and max inductance of 0.071 uH. Ideal for RF applications due to its construction as a PCB mount vertical adjuster with two terminals.
143-11J12SL
Coilcraft
Coilcraft's 143-11J12SL is a shielded variable inductor with 0.396uH to 0.54uH inductance range, ideal for RF applications. Featuring radial terminals, it has a DC resistance of 0.0192 ohm and operates b/w -40°C to 85°C. This PCB mount inductor offers high Q factor of 78 at nominal inductance.
164-11A06SL
164-11A06SL by Coilcraft is a shielded variable inductor with radial terminal placement and a test frequency of 100 MHz. It has a min inductance of 0.127 uH, nominal inductance of 0.164 uH, and operates b/w -40 to 85 °C. Ideal for RF applications, this PCB mount inductor features a vertical adjuster shape and tin/silver terminal finish.
9055
9055 by Bourns is a shielded variable inductor with lead spacing of 7.924mm and radial terminal placement. It has a min inductance of 60uH, nominal inductance of 90uH, and max inductance of 120uH. Ideal for RF applications requiring adjustable vertical mounting on PCBs.
4903
Jw Miller Magnetics
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: PCB MOUNT, VERTICAL ADJUSTER;
4904
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Shape: PRINTED WIRING PIN;
9111
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 5; Shielded: NO; Surface Mount: NO; Terminal Shape: PRINTED WIRING PIN;
The Bourns 4904 is a Variable Inductor with 0.2 uH nominal inductance, suitable for RF applications. Featuring radial terminal placement and a lead diameter of 0.66 mm, it has a max operating temperature of 105°C. This PCB mount inductor has a package size of 10.2mm x 10.2mm x 14.275mm and is ideal for vertical adjustment on circuit boards.
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 3; Shielded: NO; Surface Mount: NO; No. of Functions: 1;
4910
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; No. of Functions: 1;
7M2-102
Coilcraft's 7M2-102 is a shielded variable inductor with dual in-line terminals, ideal for RF applications. It offers an inductance range from 0.9 uH to 1.1 uH, DC resistance of 0.396 ohm, and operates b/w -40°C to 85°C temperature range.
9063
The Bourns 9063 is a shielded variable inductor with lead spacing of 7.924mm, ideal for RF applications. It offers a min inductance of 20mH and max of 60mH, with a DC resistance of 175 ohms. This PCB mount inductor has radial terminal placement and operates b/w -55°C to +105°C.
4907-S
The Bourns 4907-S is a shielded variable inductor with radial terminal placement. It has a min inductance of 0.226 uH, nominal inductance of 0.269 uH, and max inductance of 0.311 uH. Ideal for RF applications, this PCB mount inductor features a vertical adjuster shape and operates b/w -55 to 105 °C temperature range.
7M3-103
Coilcraft's 7M3-103 is a shielded variable inductor with 8-12 uH inductance range, ideal for RF applications. Featuring dual in-line terminals and ferrite core material, it operates b/w -40 to 85°C with a quality factor of 35 at nominal inductance. Perfect for PCB mounting due to its compact size (7.62x7.62x11.68 mm).
4901
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Minimum Operating Temperature: -55 Cel;
4908
The Bourns 4908 is a Variable Inductor with 0.47 uH Nominal Inductance, suitable for RF applications at frequencies up to 45 MHz. Featuring a lead diameter of 0.66 mm and radial terminal placement, it offers adjustable inductance from 0.339 uH to 0.6 uH. Ideal for PCB mounting with vertical adjuster shape, this boxed construction inductor operates b/w -55°C to 105°C temperature range.
The Bourns 4901 is a variable inductor with lead diameter of 0.66 mm and test frequency of 80 MHz. It is used as an RF inductor for PCB mount applications, featuring a min inductance of 0.041 uH and max operating temperature of 105°C.
4910 by Bourns is a Variable Inductor with 0.46 uH to 0.788 uH inductance range. It has RADIAL terminals, 45 MHz test frequency, and operates b/w -55°C to 105°C. Ideal for RF applications on PCBs due to its vertical adjuster shape and boxed construction.
4905
The Bourns 4905 is a variable inductor with a lead diameter of 0.66 mm and test frequency of 45 MHz. It is ideal for RF applications, featuring a min inductance of 0.193 uH and max operating temperature of 105°C. This PCB mount inductor has a package height of 14.275 mm and series number 4900.
2433-04
Frontier Electronics
2433-04 by Frontier Electronics is a Variable Inductor with test frequency of 50 MHz. It has a min inductance of 0.117 uH and max inductance of 0.175 uH, ideal for RF applications. This PCB mount inductor features a vertical adjuster shape, printed wiring pin terminals, and a min quality factor of 94 at nominal inductance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): PCB Mount; Shielded: YES; Surface Mount: NO;
4907
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): PCB Mount; Shielded: NO; Surface Mount: NO;
4907-RC
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 3; Shielded: NO; Surface Mount: NO; Maximum Inductance (L): .508 uH;
4907-S-RC
VARIABLE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 3; Shielded: YES; Surface Mount: NO; Manufacturer Series: 4900;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved