Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 800VAC; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Headers & Edge Type Connectors S8B-PH-K-O(LF)(SN) attributes and parameters. Explore more Headers & Edge Type Connectors devices from J S T Mfg
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Contact Gender:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Filter Feature:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
S8B-PH-K-O(LF)(SN) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Jiangsu Changjiang Electronics Technology
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Fairchild Semiconductor
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
MTCB2X-206-XXXCS061
TE Connectivity
BOARD CONNECTOR;
53261-0371
Molex
Molex 53261-0371 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style, right-angle mounting, and surface mount termination type.
15-91-1142
Molex 15-91-1142 is a 14-contact board connector with 0.1" pitch, suitable for commercial applications. Features include GLASS FILLED LIQUID CRYSTAL POLYMER insulator, 105°C max operating temp, and 15u plating thickness. Ideal for PCB mounting with solder holding posts, this male connector has a rectangular contact pattern and UL94V-0 flammability rating.
B5B-XH-A(LF)(SN)
J S T Mfg
B5B-XH-A(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.098" pitch, suitable for -25 to 85°C temp range. Features include 1000000000 ohm insulation resistance, tin over copper finish, and UL94V-0 flammability rating. Ideal for applications requiring reliable signal transmission in electronic devices.
DM1AA-SF-PEJ(72)
Hirose Electric
The Hirose Electric DM1AA-SF-PEJ(72) is a PCMCIA connector with 9 contacts, featuring a mating contact pitch of 0.098". It utilizes liquid crystal polymer insulator material and offers surface mount termination. Ideal for board mounting applications requiring a right angle mounting style.
PHDR-10VS
PHDR-10VS by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring POLYAMIDE66 insulation material, it offers an insulation resistance of 1Gohm and withstands up to 800VAC. Ideal for applications requiring a mating contact pitch of 0.079 inches, such as cable mounting with crimp termination in electronics assemblies.
ASP-134488-01
Samtec
Samtec ASP-134488-01 is a 10-row, 400-contact board connector with 0.05" pitch and liquid crystal polymer insulator. It features gold over nickel mating contacts, straight mounting style, and surface mount termination. Ideal for commercial applications requiring high-density connections on PCBs.
929665-04-36-EU
3m Electronic Products Division
3m Electronic Products Division's 929665-04-36-EU is a 72-contact, 2-row board connector with gold over nickel termination. It features copper alloy contacts, UL94V-0 flammability rating, and male gender. Ideal for straight mounting on boards, this connector has a terminal pitch of 2.54mm and is suitable for headers & edge type applications.
TSW-108-17-T-S
TSW-108-17-T-S by Samtec is a 0.1 inch pitch board connector with 8 contacts and a max operating temperature of 105°C. It features a durable design with a mating contact finish of matte tin over nickel, making it suitable for various applications in electronics and PCB assemblies.
51110-0450
Molex 51110-0450 is a 2-row board connector with 0.079" contact pitch, suitable for commercial applications. Featuring polyester insulation, it has 4 contacts with 40mohm resistance and operates b/w -40 to 105°C. Ideal for cable mounting, it offers a polarization key and UL94V-0 flammability rating.
52271-1679
The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.
50-57-9007
The Molex 50-57-9007 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It has 7 female contacts with SQ pin-skt style for cable mounting applications. The UL 94V-0 rated connector is made of glass filled polyester and meets commercial reliability standards.
B2B-ZR-SM4-TFT(LF)(SN)
B2B-ZR-SM4-TFT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 1.5mm and is used for surface mount applications in headers & edge type connectors.
SHR-14V-S-B
SHR-14V-S-B by J S T Mfg is a 14-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
09031646921
Harting Electronics & Kg
09031646921 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Body Length of 3.701", and Insulation Resistance of 1000000000000 ohm. Ideal for board connections in applications requiring high durability, it features a PCB Contact Row Spacing of 2.54mm, UL Flammability Code of 94V-0, and Rated Current - Signal at 2A.
2110110-1
The TE Connectivity 2110110-1 is a board connector with 180 contacts, featuring a mating contact pitch of 0.075" and insulator made of glass-filled liquid crystal polymer. It has a body length of 1.197", width of 0.909", and depth of 1.272". Ideal for applications requiring high reliability in commercial settings, such as PCB connections with rectangular patterns at temperatures ranging from -55°C to 85°C.
PHR-10
PHR-10 by J S T Mfg is a 10-contact board connector with 0.079" pitch, suitable for cables with 24-30 AWG wires. Featuring POLYAMIDE66 insulation and 800VAC dielectric voltage, it operates b/w -25 to 85°C. With UL94V-0 flammability rating, it offers high insulation resistance of 1 Gohm for various applications.
XHP-6
XHP-6 by J S T Mfg is a 6-contact board connector with 0.098" pitch, suitable for cables with 22-30 AWG wires. Featuring POLYAMIDE6 insulation and UL94V-0 flammability rating, it offers 1000VAC dielectric strength and operates b/w -25 to 85°C. Ideal for applications requiring a polarized housing and female contact gender.
1-640456-4
TE Connectivity 1-640456-4 is a board connector with 14 contacts, 0.1" pitch, and tin finish. It has a body size of 1.4"x0.425"x0.225" and operates b/w -55°C to 105°C. Ideal for commercial applications requiring a polarized, rectangular contact pattern with a rated current of 5A.
FTSH-105-01-F-DV-K-A-TR
Samtec's FTSH-105-01-F-DV-K-A-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved