Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
B5P-VH-B(LF)(SN) by J S T Mfg is a 5-contact board connector with brass contacts and tin finish. It has a terminal pitch of 3.96mm, suitable for straight mounting on boards. Ideal for applications requiring reliable male connectors with solder termination in headers & edge type connectors category.
Median Price
$0.218
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$0.147
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.209
Interstate Connecting
TLC Electronics
$0.329
$0.256
$0.177
$0.160
Mouser Electronics
$0.370
$0.266
$0.238
RS (Exports)
$0.357
$0.340
Future Electronics
$0.176
$0.165
Chip1Stop
$0.269
$0.253
Verical
$0.203
NEP Electronics
Greenchips
$0.084
$0.083
$0.070
Nova Conductors
$0.205
Bristol Electronics
$3.913
$1.839
$1.682
Chip Stock
SIE Connect GmbH - GreenChips
EMSNET
VNN
Vyrian
IBS Electronics
$0.248
$0.233
LIBRA Elektronik GmbH
Ampacity Inc.
$0.112
Semicontronic
$0.109
Corohmni
$0.175
Continental Prestige Electronics
$0.201
Netroflash
$0.195
$0.191
Argo Parts USA
$0.199
Advanced Electronics
Aztec Data Supply Inc.
$8.993
Kepictronics
Perfect Parts
EMSNET (Excess)
TIN termination contact finish ensures good conductivity and corrosion resistance, making this product durable and long-lasting.
Board connectors provide a reliable and secure connection between the components, ensuring stable performance of the electronic system.
Brass contact material offers excellent conductivity and durability, ensuring reliable signal transmission and long service life.
UL 94V-0 flammability rating indicates that the product meets high safety standards in case of fire, making it a secure choice for electronic applications.
TIN over copper mating contact finish provides a reliable and low-resistance connection, ensuring efficient signal transmission and reducing the risk of signal loss.
Having 5 contacts allows for multiple connections, enabling the product to handle complex electronic systems and improve connectivity.
Board mounting type ensures easy installation on circuit boards, providing a secure and stable connection between components.
A terminal pitch of 3.96mm allows for precise and accurate connections, reducing the risk of short circuits and ensuring proper signal transmission.
Solder termination type offers a strong and reliable connection between components, ensuring stability and durability in various applications.
Male contact gender is commonly used in electronic connections, providing a secure and stable transmission of signals.
Straight mounting style offers a simple and space-saving installation of the connector, making it suitable for various electronic devices and systems.
Headers & Edge Type Connectors B5P-VH-B(LF)(SN) attributes and parameters. Explore more Headers & Edge Type Connectors devices from J S T Mfg
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
B5P-VH-B(LF)(SN) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Bharat Electronics
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Wuxi Xuyang Electronic
Philips Components
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148W-7-F
Multicomp Pro
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Yangzhou Yangjie Electronics
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
PAP-03V-S
J S T Mfg
PAP-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE CRIMP termination and CABLE mounting, making it ideal for various applications requiring secure cable connections.
10067847-001RLF
Amphenol Communications Solutions
Amphenol's 10067847-001RLF is a PCB connector with 11 contacts, rated at 0.5A signal current. Featuring a mating contact pitch of 0.066", it offers high insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for board mounting applications, this durable connector has a plating thickness of 50u and meets UL standards.
22-55-2201
Molex
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
B06B-PASK-1
B06B-PASK-1 by J S T Mfg is a BOARD CONNECTOR with 6 contacts, made of COPPER ALLOY. It has Tin/Lead termination finish and 2mm terminal pitch for soldering. Ideal for applications requiring reliable male connectors in headers & edge type configurations.
2-5767004-2
Tyco Electronics Amp
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 5767004; Mounting Style: STRAIGHT; Total No. of Contacts: 38;
10124017-1022225LF
Amphenol's 10124017-1022225LF is a 25-contact board stacking connector with gold flash termination, suitable for PCB mounting. Featuring a mating contact pitch of 0.039", insulation resistance of 1Gohm, and dielectric voltage withstand of 707VAC, it is ideal for applications requiring high durability and signal current up to 1A.
B3P-VH-FB-B(LF)(SN)
B3P-VH-FB-B(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.156" pitch, ideal for applications requiring straight mounting. Featuring tin over copper finish and brass contacts, it has a body size of 0.535" x 0.382" x 0.433". The UL 94V-0 rated connector uses solder termination and glass-filled polybutylene terephthalate insulator material.
7-215079-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Board Mounting Option: SOLDERABLE RETENTION CLIPS; Insulator Color: RED;
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
M20-9990245
Harwin Plc
M20-9990245 by Harwin PLC is a board connector with 0.1" mating contact pitch, 3A signal current rating, and 750VAC dielectric voltage. Ideal for commercial applications, it features gold-plated contacts, polyamide insulator, and operates b/w -40°C to 105°C temperature range.
90120-0762
Molex 90120-0762 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring bright tin finish, it offers 3A signal current rating and withstands up to 1000VAC. With a durable design lasting 30 cycles, this male connector is ideal for PCB mounting with solder termination.
6420-9200
3m Electronic Products Division
3M Electronic Products Division's 6420-9200 is a 20-contact board connector with 2 rows, 0.1" pitch, and glass-filled polyester insulator. It features UL94V-0 flammability rating, solder termination, and straight mounting style. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
VHR-3N-BL
VHR-3N-BL by J S T Mfg is a 3-contact BOARD CONNECTOR with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation material, it has an operating temperature range of -25 to 85 °C. Ideal for commercial applications, this connector offers reliable performance with a polarization key and blue insulator color.
22-29-2061
The Molex 22-29-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and rated current of 4A. It has a body length of 0.6", body width of 0.23", and operates b/w temperatures of 0 to 75°C. This connector is ideal for applications requiring reliable signal transmission on PCBs in commercial settings.
VHR-2N
VHR-2N by J S T Mfg is a 2-contact BOARD CONNECTOR with POLYAMIDE6 insulator. Featuring mating pitch of 0.156", it has 0.309" x 0.244" x 0.413" dimensions. Ideal for CABLE mounting, CRIMP termination, and applications requiring FEMALE SQ PIN-SKT contacts.
FTSH-105-01-L-DV-007-K-P-TR
Samtec
Samtec's FTSH-105-01-L-DV-007-K-P-TR is a 2-row, 9-contact board connector with a mating contact pitch of 0.05". It features tin termination with nickel barrier, rated for 3.4A signal current and operating temperatures from -55 to 125°C. Ideal for commercial applications requiring reliable male connectors on PCBs with rectangular contact patterns.
22-27-2061
The Molex 22-27-2061 is a board connector with 6 contacts, rated at 2.5A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
HTSW-102-07-G-S
Samtec's HTSW-102-07-G-S header connector features a 0.1" contact pitch, gold over nickel termination finish, and liquid crystal polymer insulator. With a temperature range of -55 to 125°C, it is ideal for board-to-board connections in commercial applications requiring high reliability.
B2B-PH-K-S(LF)(SN)
B2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring high insulation resistance, POLYAMIDE66 insulator material, and TIN COPPER termination finish in a compact 0.232" x 0.177" x 0.236" body size.
43650-0212
The Molex 43650-0212 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 100u plating thickness. Ideal for applications requiring a durable male connector with 5A signal current rating, operating b/w -40 to 105°C in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B5P-VH(LF)(SN)
B5P-VH(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC dielectric voltage, and 10A signal current. It features POLYAMIDE66 insulation, BRASS contacts with Tin finish, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring high insulation resistance and UL94V-0 flammability rating.
B5P-VH-FB-B(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Mounting Style: STRAIGHT; Total No. of Contacts: 5;
B5P-VH-FB-B
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; UL Flammability Code: 94V-0; Mounting Style: STRAIGHT;
B5P-VH-B
B5P-VH-B by J S T Mfg is a 5-contact male board connector with tin finish, brass contact material, and UL 94V-0 flammability rating. It has a terminal pitch of 3.96mm for solder termination on boards. Ideal for applications requiring straight mounting style in headers & edge type connectors.
B5P-VH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; No. of PCB Rows: 1; Insulator Material: POLYAMIDE66;
B5P-VS
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Mixed Contacts: NO; Filter Feature: NO;
B5P-VR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Terminal Pitch (mm): 3.96; Contact Material: BRASS;
B5P-VR(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: TOP ENTRY; Total No. of Contacts: 5; MIL Conformity: NO;
B5P-VH-M(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Type: BOARD;
B5P-VH-R(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Termination Type: SOLDER;
B5P-VH-BK(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mating Info.: MULTIPAL MATING PARTS AVAILBLE;
B5P-VH-H(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Option-1: LOCKING;
B5P-VH-O(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; No. of Rows Loaded: 1;
B5P-VH-TR(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mixed Contacts: NO;
B5P-VH-BL(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Insulator Color: BLUE;
B5P-VH-PK(LF)(SN)
B5P-VH-Y(LF)(SN)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; UL Flammability Code: 94V-0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved