Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LFXTAL003237REEL by IQD Frequency Products is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a parallel-fundamental type crystal resonator operating at 16 MHz. Suitable for surface mounting with a temperature range of -10 to 60°C.
Median Price
$0.230
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Chip1Stop
$0.263
$0.234
Future Electronics
$0.199
$0.190
Arrow
$0.213
$0.204
Mouser Electronics
$0.232
Nova Conductors
$0.300
Component Electronics Inc.
$0.620
$0.460
$0.400
IBS Electronics
$0.287
$0.274
Vyrian
NAC Semi
$0.332
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Rebound Electronics
Continental Prestige Electronics
$0.294
Argo Parts USA
$0.291
Advanced Electronics
$1.740
$1.653
Aztec Data Supply Inc.
$1.910
Glotronic Ltd.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Metaverse IC Inc.
Computer Components Inc. - USA
Kepictronics
The low frequency tolerance ensures accurate and reliable performance in various applications.
The high frequency stability ensures consistent operation over time and temperature changes.
The low series resistance helps in efficient power consumption and signal integrity.
The wide operating temperature range allows for use in various environments without performance degradation.
The TIN terminal finish provides good solderability and reliability in assembly processes.
The parallel fundamental type offers high frequency stability and low phase noise for precise timing applications.
The 16 MHz frequency is suitable for a wide range of applications requiring precise timing.
The low aging rate ensures long-term frequency accuracy and stability.
The required load capacitance is specified for optimal performance and frequency accuracy.
The surface mount design allows for easy and convenient integration onto PCBs.
The drive level specification ensures proper power input for optimal performance.
The compact size of the oscillator makes it suitable for space-constrained applications.
The high maximum operating temperature allows for reliable performance in harsh environments.
Crystal Oscillators LFXTAL003237REEL attributes and parameters. Explore more Crystal Oscillators devices from Iqd Frequency Products
Aging:
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
JESD-609 Code:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
Terminal Finish:
LFXTAL003237REEL Crystals & Resonators trade compliance attributes, and parameters.
HTS
8541.60.00.50
SB
8541.60.00.25
IQD has been a recognised market leader in the frequency control market since 1973 and is part of the Würth Elektronik eiSos group, one of the leading European suppliers of passive components. With active customers in over 80 countries, IQD offers one of the most comprehensive frequency product ranges available, from low cost commercial grade product to that used in high reliability industrial and automotive applications including: Quartz Crystals Clock Oscillators Automotive Crystals & Oscillators to AEC-Q200 Fast Make Oscillators VCXOs TCXOs & VCTCXOs OCXOs Disciplined OCXOs Rubidium Oscillators Our full range of products is available direct from our sales offices (see ‘Contact Us’) or via our extensive worldwide distribution network (see ‘Distributors’). Customer Partnerships We take a partnership approach to working with our customers. Our experienced multilingual Sales, Application Support and Engineering teams guide customers from design stage through to full production. IQD’s products are specified by leading manufacturers in the aerospace, automotive, communications, computing, consumer, industrial and medical industries throughout the world. We work with several premier IC designers and are approved on a variety of reference designs.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Hitachi
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Daco Semiconductor
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ABM3-25.000MHZ-D2Y-T
ABM3-25.000MHZ-D2Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Features surface mounting and nickel gold terminal finish for reliable performance in temperature range of -40 to 85 °C.
MC-30632.768K-E3:ROHS
Seiko Epson
MC-30632.768K-E3:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations at temperatures ranging from -40 to 85 °C.
CM7V-T1A32.768KHZ12.5PF+/-20PPMTBQA
Micro Crystal Ag
CM7V-T1A32.768KHZ12.5PF+/-20PPMTBQA by Micro Crystal Ag is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance, 350% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 125 °C operating range and gold terminal finish.
CM315D32768DZFT
Citizen Finedevice
Citizen Finedevice's CM315D32768DZFT crystal oscillator offers 20 ppm frequency tolerance and 120% stability. With a parallel fundamental type, it operates at 0.032768 MHz, ideal for applications requiring precise timing in a compact surface-mount design.
ABLSG-4.9152MHZ-D-2-Y-T
ABLSG-4.9152MHZ-D-2-Y-T by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 30%. It has a series resistance of 180 ohm and is suitable for applications requiring a nominal operating frequency of 4.9152 MHz, such as in surface mount devices.
ABM8W-52.0000MHZ-7-J1Z-T3
Abracon's ABM8W-52.0000MHZ-7-J1Z-T3 is a 52 MHz crystal oscillator with 10 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 105°C, such as telecommunications equipment and industrial automation systems.
830009709
Wuerth Elektronik & Kg
Wurth Elektronik 830009709 crystal oscillator operates at 0.032768 MHz with 20 ppm frequency tolerance. Featuring 70000 ohm series resistance and 7 pF load capacitance, it is ideal for surface mount applications requiring precise timing in electronic circuits.
403C11A12M00000
Cts
Cts 403C11A12M00000 crystal oscillator offers 10 ppm frequency tolerance and 10% stability. With a nominal frequency of 12 MHz, it's ideal for applications requiring precise timing in electronics. This surface-mount device operates b/w -20°C to 70°C, making it versatile for various temperature conditions.
ABLS-25.000MHZ-D-4-H-F-T
ABLS-25.000MHZ-D-4-H-F-T by Abracon is a crystal oscillator with 25MHz frequency, 30 ppm tolerance, and 35% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C. Suitable for surface mount designs due to compact size of 11.4mm x 4.7mm x 4.2mm and low drive level of 100 uW.
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
ABS06-107-32.768KHZ-T
Abracon ABS06-107-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 250% stability, and 80000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency in a compact L2.0XB1.2XH0.6 mm surface mount package with GOLD terminal finish.
ABLS-12.000MHZ-16-A-4-H-T
ABLS-12.000MHZ-16-A-4-H-T by Abracon is a 12MHz crystal oscillator with 30ppm frequency tolerance and 35% stability. Ideal for applications requiring precise timing, it operates b/w -10°C to 60°C and features a parallel-fundamental crystal type.
CM315DL32768DZFT
Citizen Finedevice's CM315DL32768DZFT crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications and industrial automation systems.
AB26T-32.768KHZ-E
AB26T-32.768KHZ-E by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 69% stability, and 35000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz frequency, such as in industrial automation systems or telecommunications equipment.
TSX-322516.0000MF09Z-AC0
TSX-322516.0000MF09Z-AC0 by Seiko Epson is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 9% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 75 °C and features gold over nickel terminal finish for surface mount installation.
C3E-25.000-12-3030-X
Aker Technology
Aker Technology's C3E-25.000-12-3030-X is a crystal oscillator with a frequency tolerance of 30 ppm and stability of 30%. It operates at a nominal frequency of 25 MHz and has a series resistance of 100 ohm. This surface mount device is commonly used in applications requiring precise timing and frequency control.
445C32J25M00000
CTS 445C32J25M00000 crystal oscillator offers 30 ppm frequency tolerance, 20% stability, and 40 ohm series resistance. Ideal for applications requiring precise timing at a nominal operating frequency of 25 MHz in a compact surface mount package.
ABS07-32.768KHZ-7-T
Abracon ABS07-32.768KHZ-7-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz frequency, such as IoT devices and communication systems. Operating temperature range from -40 to 85 °C with GOLD OVER NICKEL finish.
XRCGB27M120F2P10R0
Murata Manufacturing
Murata Manufacturing's XRCGB27M120F2P10R0 crystal oscillator operates at 27.12 MHz with a frequency tolerance of 20 ppm and stability of 20%. Suitable for applications requiring precise timing, it features a low aging rate of 5 PPM/YEAR and surface mounting feature.
ABL-3.579545MHZ-B2
Abracon's ABL-3.579545MHZ-B2 crystal oscillator offers 20 ppm frequency tolerance, 50% stability, and 180 ohm series resistance. Ideal for applications requiring a parallel fundamental crystal resonator at 3.579545 MHz, with -20 to 70°C operating range. Suitable for surface mount setups needing precise timing control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LFXTAL003206
Quartz Crystals;
LFXTAL003000REEL
LFXTAL003000REEL by IQD Frequency Products is a 32.768 MHz crystal oscillator with 20 ppm frequency tolerance and 5 PPM/YEAR aging. Ideal for applications requiring precise timing, it features a parallel-fundamental crystal type and operates b/w -40 to 85 °C temperatures.
LFXTAL009678REEL
LFXTAL009678REEL by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 80000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing such as IoT devices, wearables, and automotive electronics.
LFXTAL003004
LFXTAL003004 by IQD Frequency Products is a 0.032768 MHz crystal oscillator with 20 ppm frequency tolerance and 126% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85°C and features a parallel-fundamental crystal type suitable for surface mounting.
LFXTAL003004REEL
LFXTAL003004REEL by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 50000 ohm series resistance, and -40 to 85 °C operating temperature range. It is ideal for applications requiring precise timing such as telecommunications equipment and industrial automation systems.
LFXTAL003210BULK
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Maximum Operating Temperature: 60 Cel; Load Capacitance: 16 pF;
LFXTAL003000BULK
LFXTAL003000BULK by Iqd Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 50000 ohm series resistance, and 5 PPM/year aging. It operates at 0.032768 MHz and is ideal for applications requiring precise timing in compact electronic devices.
LFXTAL003000
PARALLEL - FUNDAMENTAL;
LFXTAL003240
LFXTAL003240 by IQD Frequency Products is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Operating at 16 MHz, it's ideal for applications requiring precise timing such as in telecommunications equipment or industrial automation systems. With a compact size of 11.05mm x 4.7mm x 4mm and through-hole mounting feature, it offers reliable performance in temperature ranges from -20°C to 70°C.
LFXTAL003004BULK
LFXTAL003004BULK by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 50000 ohm series resistance, and -40 to 85 °C operating temperature range. It is ideal for applications requiring precise timing such as in telecommunications, industrial automation, and consumer electronics.
LFXTAL003004CUTT
LFXTAL003004CUTT by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 50000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring 0.032768 MHz frequency stability in surface mount configurations.
LFXTAL009678BULK
LFXTAL009678BULK by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 80000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing such as communication systems and industrial automation.
LFXTAL003068
LFXTAL003151REEL
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Minimum Operating Temperature: -10 Cel; Load Capacitance: 16 pF;
LFXTAL050789CUTT
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Series Resistance: 90000 ohm;
LFXTAL009678CUTT
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Drive Level: 1 uW; Minimum Operating Temperature: -40 Cel;
LFXTAL003074
PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Maximum Operating Temperature: 60 Cel; Load Capacitance: 30 pF;
LFXTAL003206BULK
PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Nominal Operating Frequency: 12 MHz; JESD-609 Code: e3/e1;
LFXTAL003237CUTT
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Drive Level: 500 uW; Maximum Operating Temperature: 60 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved