Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EPM7128SQI100-10 by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can handle a max supply voltage of 5.5 V. Ideal for industrial applications requiring high-speed programmable logic devices in compact form factors.
Median Price
-
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Chip Stock
Digiode
Nova Conductors
Manoshevitz Elec. Sales
PC Components Company LLC
Bristol Electronics
Speed Components Ltd
Pegasus Components GmbH
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
ECAB
Tectiva GmbH
Mil-Aero Solutions, Inc.
ComSIT Distribution GmbH
ComSIT USA
Ampacity Inc.
$7.000
Andel Nordic
$11.412
$10.956
AZTECH Wire
$11.900
$11.430
$11.200
$10.980
Semicontronic
$17.000
$16.575
$16.490
One Stop Electronics
$32.000
Modulus Dynamics
$34.878
Corohmni
$91.247
Component Stockers USA
$99.990
Advanced Electronics
$136.466
$124.184
$111.902
Aztec Data Supply Inc.
$166.300
Texas Native Microelectronics
$176.997
$155.757
Kenton Components
$187.765
$180.255
$174.622
$165.233
Microchip USA
$191.569
Qasali Group International
$422.472
$392.899
Authorized Procurement Solutions
A-Z Elektronik GmbH
Continental Prestige Electronics
Alle Elektronik GmbH
Glotronic Ltd.
MARBEL Systems
Argo Parts USA
Supply Digital
Infinite Electronics LLP (Excess)
Vigor
Corphita
Perfect Parts
Kepictronics
Futuretech Components
Bastille Electronics
Pacific Micro-Tech
Computer Components Inc. - USA
Low propagation delay ensures fast response time, making it suitable for high-speed applications.
Having 128 macro cells provides flexibility in implementing complex logic functions, making it versatile for different design requirements.
With 84 inputs, the device can interface with a large number of external components or signals, enabling a wide range of applications.
The ability to be programmed in-system allows for easy updates and corrections without the need for physical reconfiguration, enhancing flexibility in design iterations.
High maximum clock frequency enables efficient processing of signals at high speeds, making it suitable for demanding real-time applications.
JTAG boundary scan test capability simplifies debugging and testing processes, enhancing reliability and ease of maintenance.
Programmable Logic Devices (PLD) EPM7128SQI100-10 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Intel
Programmable IC Type:
In-System Programmable:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
EPM7128SQI100-10 Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Intel Corporation (commonly known as Intel) is an American multinational corporation and technology company headquartered in Santa Clara, California. It is one of the world's largest semiconductor chip manufacturer by revenue, and is one of the developers of the x86 series of instruction sets found in most personal computers (PCs). Incorporated in Delaware, Intel ranked No. 45 in the 2020 Fortune 500 list of the largest United States corporations by total revenue for nearly a decade, from 2007 to 2016 fiscal years. Intel supplies microprocessors for computer system manufacturers such as Acer, Lenovo, HP, and Dell. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing. Intel (integrated and electronics) was founded on July 18, 1968, by semiconductor pioneers Gordon Moore (of Moore's law) and Robert Noyce (1927–1990), and is associated with the executive leadership and vision of Andrew Grove. Intel was a key component of the rise of Silicon Valley as a high-tech center. Noyce was a key inventor of the integrated circuit (microchip). Intel was an early developer of SRAM and DRAM memory chips, which represented the majority of its business until 1981. Although Intel created the world's first commercial microprocessor chip in 1971, it was not until the success of the personal computer (PC) that this became its primary business.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
New England Semiconductor
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EPM3128ATI100-10N
Altera
The EPM3128ATI100-10N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 3.6 V. The package is square-shaped and made of plastic/epoxy, with gull-wing terminals. It is surface mountable and in-system programmable. With a clock frequency of 98 MHz, it is suitable for industrial applications requiring high-speed data processing.
XC2C512-10FGG324I
Xilinx
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 324; Package Code: BGA; Package Shape: SQUARE;
SLG46826V
Renesas Electronics
SLG46826V by Renesas Electronics is a programmable logic device (PLD) with 19 macro cells and 13 inputs. It has a max supply voltage of 5.5V and can be used for various applications requiring in-system programmability and output function control.
EPM240GM100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE;
XC2C64A-7CP56I
XC2C64A-7CP56I by Xilinx is a 64 macrocell FLASH PLD with 7.5 ns propagation delay, operating at up to 200 MHz. Ideal for industrial applications, it features in-system programmability, 45 I/O lines, and JTAG boundary scan testing capabilities.
EPF10K50VRI240-4N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
EPM3032ALC44-4N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EPM7032SLC44-7N
The Altera EPM7032SLC44-7N is a 32 macrocell EE PLD with 7.5 ns propagation delay, operating at up to 166.7 MHz clock frequency. It features in-system programmability and 36 I/O lines, suitable for applications requiring fast logic processing and versatile I/O capabilities in commercial-grade environments.
EPF8452ALI84-4N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
XC95108-15PC84C
XC95108-15PC84C by Xilinx is a 108 macrocell FLASH PLD with 15 ns propagation delay, operating at 5V. It features in-system programmability and JTAG boundary scan test for versatile applications in Programmable Logic Devices (PLD). With a package style of CHIP CARRIER and dimensions of 29.31mm x 29.31mm, it's suitable for commercial-grade projects requiring fast processing speeds.
EPM2210F324I5N
Intel
The Intel EPM2210F324I5N is a programmable logic device (PLD) with 1700 macro cells and 272 inputs/outputs. It uses CMOS technology and has a max supply voltage of 2.625V. This PLD is suitable for applications requiring in-system programmability and output functions using macrocells.
5M40ZE64I5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE;
PEEL18CV8P-15L
Integrated Circuit Technology
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
EP1K50QC208-3
EP1K50QC208-3 by Intel is a PLD with 2880 logic cells, 0.5 ns propagation delay, and 147 inputs. It is used in applications requiring fast processing speeds and high input/output capabilities due to its CMOS technology and loadable PLD type. The device features a square package shape, gull wing terminals, and operates within a temperature range of 0 to 70 °C.
5M160ZT100C5N
The Altera 5M160ZT100C5N is a programmable logic device with 128 macro cells and a maximum clock frequency of 118.3 MHz. It has a propagation delay of 14 ns and operates at a nominal supply voltage of 1.8V. This device is surface mountable, in-system programmable, and features JTAG boundary scan test. It is commonly used for applications requiring high-speed and versatile programmable logic solutions.
SLG46120V
Dialog Semiconductor
OT PLD; Form Of Terminal: NO LEAD; No. of Terminals: 12; Package Code: VQCCN; Package Shape: SQUARE; JTAG Boundary Scan Test: NO;
XC2C32A-6QFG32I
Xilinx XC2C32A-6QFG32I is a 32 macrocell FLASH PLD with 6 ns propagation delay and 300 MHz max clock frequency. Ideal for industrial applications, it operates at -40 to 85 °C, has 21 I/O lines, and supports JTAG boundary scan testing.
GAL22V10D-25QJN
Lattice Semiconductor
GAL22V10D-25QJN by Lattice Semiconductor is a CMOS PLD with 25 ns propagation delay, 132 product terms, and 33.3 MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature range. Package: CHIP CARRIER, Surface Mount: YES, Outputs: 10.
PEEL18CV8P-15
Anachip
EPM7032SLC44-6N
The Altera EPM7032SLC44-6N is a 32 macrocell EE PLD with 36 I/O lines, operating at up to 200 MHz. It features a propagation delay of 6 ns and can be in-system programmable. This Programmable Logic Device is commonly used in applications requiring high-speed digital processing and control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPM7064STC44-10N
EPM7064STC44-10N by Intel is a 64 macrocell EE PLD with 36 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile input/output configurations in commercial-grade environments.
The EPM7064STC44-10N by Altera is a Programmable Logic Device (PLD) with 64 macro cells. It has a maximum clock frequency of 125 MHz and a propagation delay of 10 ns. This PLD is surface mountable and operates at a nominal supply voltage of 5V. It is commonly used for in-system programmable applications.
EPM7128AETC100-5N
Intel's EPM7128AETC100-5N is a 128 macrocell EE PLD with 5ns propagation delay and 192.3MHz clock frequency. Ideal for applications requiring in-system programmability, it features 84 I/O lines, operates at max temp of 70°C, and has a package style of flatpack with low profile and fine pitch.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128SQI100-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
The Intel EPM7128SQI100-10N is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed logic processing within a temperature range of -40 to 85°C.
EPM7064AETI100-7N
EPM7064AETI100-7N by Intel is a 64 macrocell EE PLD with 68 I/O lines, operating at up to 135.1 MHz clock frequency. It features a propagation delay of 7.5 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing capabilities.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128STC100-15N
EPM7128STC100-15N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 100 MHz. It features a propagation delay of 15 ns and can be in-system programmable. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
EPM7256AETI144-7N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPM7128BTC100-4N
EPM7128BTC100-4N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 243.9 MHz clock frequency. It has a propagation delay of 4 ns and can be used for in-system programmable applications requiring low profile, fine pitch packaging.
EPM7128STI100-10N
The EPM7128STI100-10N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 10 ns and can operate at a maximum clock frequency of 125 MHz. The device supports in-system programming and has 84 I/O lines. It can be powered by 3.3V or 5V supplies and is compatible with CMOS technology. It is commonly used in industrial applications.
EPM7128STI100-10N by Intel is a 128 macrocell EE PLD with 10 ns propagation delay and 125 MHz max clock frequency. It is used in industrial applications, featuring in-system programmability, JTAG boundary scan test, and 84 I/O lines for versatile connectivity.
EPM7192SQI160-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
EPM7064SLC44-10N
The EPM7064SLC44-10N by Altera is a programmable logic device with 64 macro cells. It has a propagation delay of 10 ns and a maximum supply voltage of 5.25 V. This CMOS device is surface mountable and in-system programmable. Its application includes output function as macrocell and it can operate at a maximum clock frequency of 125 MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved