Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 36; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Package Equivalence Code: LCC36,.25SQ,20;
Median Price
$8.720
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Renesas
1+ parts
100+ parts
$5.820
1k+ parts
$5.215
10k+ parts
-
Component Stockers USA
$8.760
$6.550
Northwest PG Solutions
A-Z Elektronik GmbH
Native Components
RF/Microwave Mixers F1178NBGI attributes and parameters. Explore more RF/Microwave Mixers devices from Integrated Device Technology
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Sub-Category:
Maximum Supply Current:
Terminal Finish:
F1178NBGI RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Renesas Electronics Corporation (TSE: 6723, “Renesas”), a premier supplier of advanced semiconductor solutions, and Integrated Device Technology, Inc. (“IDT”), a leading supplier of analog mixed-signal products, including sensors, connectivity and wireless power, today jointly announced the successful completion of Renesas’ acquisition of IDT, as of March 30, 2019 JST, March 29, 2019 PDT, following approvals by IDT shareholders and the relevant regulatory authorities.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
261
Deltrol Controls
Other Relays;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
DS18B20Z/T&R
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1552200253
Molex
WIRE AND CABLE;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
HMC213AMS8ETR
Analog Devices
Analog Devices' HMC213AMS8ETR is a GAAS technology RF/Microwave Mixer with 8 terminals and matte tin finish. It operates b/w -40 °C to 85°C, making it suitable for various applications requiring double balanced surface mount devices.
HMC218BMS8GE
Analog Devices' HMC218BMS8GE is a RF/Microwave Mixer with 50 ohm impedance, 3500-8000 MHz frequency range, and 8.5 dB conversion loss. It can handle up to 13 dBm CW input power, making it ideal for high-frequency applications in temperatures ranging from -40°C to 85°C.
RMS-30+
Mini-circuits
The Mini-circuits RMS-30+ is a ceramic RF mixer with 6 terminals, operating from 200 MHz to 3 GHz. It offers a max conversion loss of 9.8 dB and can handle up to 17 dBm CW input power. Ideal for applications requiring double balanced RF/microwave mixers in surface mount configurations.
AD8342ACPZ-WP
AD8342ACPZ-WP by Analog Devices is a RF/Microwave Mixer with 16 terminals, operating from 50 MHz to 2400 MHz. It has a max input power of 12 dBm and operates on a 5V power supply. Ideal for applications requiring double balanced technology and surface mounting feature.
HMC558ALC3BTR
Analog Devices' HMC558ALC3BTR is a ceramic RF/Microwave Mixer with 12 terminals. It operates from -40 to 85°C, handling up to 25 dBm CW power. Featuring double balanced design, it offers a frequency range of 5.5-14 GHz for various applications in communications and radar systems.
HMC219BMS8GETR
HMC219BMS8GETR by Analog Devices is a RF/Microwave Mixer with 25 dBm CW input power, 2500-7000 MHz frequency range, and 11 dB conversion loss. It is a double balanced component suitable for applications requiring high performance in temperature-sensitive environments.
HMC340ALP5E
Analog Devices' HMC340ALP5E is a RF/Microwave Mixer with 32 terminals, operating from -40 to 85°C. It features a max input power of 13 dBm, double balanced technology, and operates b/w 1700-4500 MHz. Ideal for applications requiring high frequency conversion with low loss in surface mount configurations.
HMC292ALC3BTR-R5
Analog Devices' HMC292ALC3BTR-R5 is a RF/Microwave Mixer with 18 dBm CW input power, 50 ohm impedance, and 12.5 dB conversion loss. It operates from -40 to 85 °C, suitable for applications requiring double balanced mixers in the frequency range of 14-30 GHz.
HMC171C8TR
DOUBLE BALANCED; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
HMC483MS8GE
Analog Devices' HMC483MS8GE is a RF/Microwave Mixer with 27 dBm CW input power, 12 dB conversion loss, and 50 ohm impedance. It operates b/w -40 to 85 °C and covers frequencies from 700 MHz to 1400 MHz. Ideal for applications requiring high-performance double balanced mixers in RF systems.
HMC412BMS8GETR
Analog Devices' HMC412BMS8GETR is a RF/Microwave Mixer with 24 dBm CW input power, -40 to 85 °C operating temp range, and 50 ohm impedance. Ideal for applications requiring triple balanced devices, it operates from 9-15 GHz with a low conversion loss of 9.4 dB.
PMB2330
Infineon Technologies
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3/7;
AD8344ACPZ-WP
AD8344ACPZ-WP by Analog Devices is a RF/Microwave Mixer with 16 terminals, operating frequency range of 400-1200 MHz, and max input power of 12 dBm. It is a double balanced component suitable for applications requiring high-frequency signal mixing in the temperature range of -40 to 85 °C.
TDA6131XS
TRIPLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
HMC340ALP5ETR
Analog Devices' HMC340ALP5ETR is a GAAS technology RF/Microwave Mixer with 32 terminals. It operates b/w -40 °C to 85°C, featuring a double balanced design for surface mount applications. Ideal for high-frequency signal processing in communication systems.
IAM-93516-TR2
Broadcom
TRIPLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 400 MHz;
RMS-1MH+
The Mini-circuits RMS-1MH+ is a RF/Microwave Mixer with 6 terminals, operating from 2MHz to 500MHz. It offers a low conversion loss of 8dB and can handle up to 23dBm CW input power. Ideal for applications requiring double balanced mixers in surface mount packages.
HMC1048ALC3B
HMC1048ALC3B by Analog Devices is a RF/Microwave Mixer with max input power of 16 dBm, operating freq range of 2250-18000 MHz, and conversion loss of 14 dB. Ideal for applications requiring high frequency mixing such as radar systems and communication equipment.
LTC5562IUC#PBF
LTC5562IUC#PBF by Analog Devices is a RF/Microwave Mixer with 10 terminals, operating from -40 to 105 °C. It has a max input power of 15 dBm and operates in the frequency range of 0-9000 MHz. This component is ideal for applications requiring double balanced RF or microwave devices with a characteristic impedance of 50 ohms.
MCA1-12G
MCA1-12G by Mini-circuits is a RF/Microwave Mixer with max input power of 17 dBm, VSWR of 3.58, and conversion loss of 8.5 dB. Ideal for applications requiring double balanced RF devices operating b/w 3800-12000 MHz in temperatures ranging from -55 to 100°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT5511EFE#PBF
DOUBLE BALANCED; Characteristic Impedance: 50 ohm; JESD-609 Code: e3; Maximum Input Power (CW): 10 dBm; Construction: COMPONENT; Terminal Finish: MATTE TIN;
Integrated Device Technology
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved