Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Maximum Operating Temperature: 125 Cel; Quick Connects Description: 2G-2GR; Non Repetitive Peak On-state Current: 6000 A; Repetitive Peak Reverse Voltage: 800 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Modulus Dynamics
$2.044
$1.962
$1.880
Corphita
Silicon Controlled Rectifiers (SCR) TT180F08KFC-A attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Infineon Technologies
Configuration:
Quick Connects Description:
Screw Terminals Description:
Non Repetitive Peak On-state Current:
No. of Elements:
Maximum On-state Current:
Maximum Operating Temperature:
Repetitive Peak Reverse Voltage:
Sub-Category:
Trigger Device Type:
TT180F08KFC-A Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
Intersil
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Shenzhen Socay Electronics
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
2N3006
2N3006 by Texas Instruments is a SCR with max. DC Gate Trigger Current of 0.2mA, Non Repetitive Peak On-state Current of 6A, and Max. Leakage Current of 0.1mA. It is used in applications requiring reliable switching capabilities at temperatures ranging from -60 to 155°C.
SKKL92/12E
Semikron International
SKKL92/12E by Semikron is a SCR with max DC Gate Trigger Current of 150mA, Non Repetitive Peak On-state Current of 2000A, and Max On-state Current of 95A. It is used in applications requiring high current switching capabilities such as industrial power supplies and motor control systems.
C106D1
Asi Semiconductor
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Maximum On-state Current: 4 A; Maximum Leakage Current: .1 mA; Minimum Operating Temperature: -40 Cel;
VW2X60-14IO1
Littelfuse
VW2X60-14IO1 by Littelfuse is a SCR with 100mA DC Gate Trigger Current, 520A Non Repetitive Peak On-state Current, and 27A Max On-state Current. Ideal for high-power applications like industrial motor drives due to its 1400V Repetitive Peak Reverse Voltage and 125°C Max Operating Temp.
2N6509TG
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
2N1595
New Jersey Semiconductor Products
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Non Repetitive Peak On-state Current: 15 A;
MCC44-18IO8B
The Littelfuse MCC44-18IO8B is a SCR with max DC Gate Trigger Current of 100mA, Non Repetitive Peak On-state Current of 1200A, and Max RMS On-state Current of 80A. It's used in applications requiring high current switching capabilities like industrial power control systems.
MCC162-18IO1
MCC162-18IO1 by Littelfuse is a SERIES CONNECTED SCR with 150mA DC Gate Trigger Current, 6400A Non Repetitive Peak On-state Current, and 300A Max On-state Current. Ideal for applications requiring high current switching such as industrial power control systems.
2N2323A
Unitrode
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 125 Cel;
S1D
Micro Electronics
SCR; Surface Mount: NO; Maximum Holding Current: 5 mA; Maximum DC Gate Trigger Voltage: .8 V; Maximum On-state Current: 1.2 A; Terminal Finish: Tin/Lead (Sn/Pb);
TZ425N18KOFHPSA1
Infineon Technologies
Infineon Technologies' TZ425N18KOFHPSA1 is a SINGLE SCR with 1800V repetitive peak reverse voltage and 800A max RMS on-state current. Ideal for high-power applications, this RECTANGULAR package SCR has a FLANGE MOUNT style and isolated case connection.
2N2323
Silicon Transistor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
2N6565
Boca Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Repetitive Peak Reverse Voltage: 400 V; Package Body Material: PLASTIC/EPOXY;
TIC39B
TIC39B by Texas Instruments is a single SCR with max on-state current of 2A and trigger voltage of 1V. It has a non-repetitive peak on-state current of 20A, making it suitable for applications requiring high power control in industrial settings. With a package style of cylindrical and max operating temperature of 140°C, it is ideal for use in demanding environments.
Diodes Incorporated
TS820-600T
TS820-600T by STMicroelectronics is a single SCR with 600V repetitive peak reverse voltage and 5A max on-state current. It has a 0.2mA max DC gate trigger current, making it suitable for applications requiring high power control in industrial settings. The package style is flange mount with through-hole terminals, operating b/w -40 to 125 °C.
VS-VSKT250-16PBF
Vishay Intertechnology
SCR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
X0115MUF
SCR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2N1599
Space Power Electronics
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Non Repetitive Peak On-state Current: 15 A; Maximum Leakage Current: 6 mA;
MCR716T4G
SCR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TT180F08KFL
SCR; Screw Terminals Description: A-K-AK; Maximum On-state Current: 180 A; Maximum Operating Temperature: 125 Cel; Non Repetitive Peak On-state Current: 6000 A; Repetitive Peak Reverse Voltage: 800 V;
TT180F08KEM-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Repetitive Peak Reverse Voltage: 800 V; Maximum Operating Temperature: 125 Cel; Maximum On-state Current: 180 A; No. of Elements: 2;
TT180F08KEC-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Repetitive Peak Reverse Voltage: 800 V; Maximum On-state Current: 180 A; No. of Elements: 2; Maximum Operating Temperature: 125 Cel;
TT180F08KFB
SCR; Screw Terminals Description: A-K-AK; Maximum Operating Temperature: 125 Cel; Non Repetitive Peak On-state Current: 6000 A; Repetitive Peak Reverse Voltage: 800 V; Quick Connects Description: 2G-2GR;
TT180F08KEL-K
SCR; Configuration: COMMON CATHODE, 2 ELEMENTS; Screw Terminals Description: 2A-CK; Maximum Operating Temperature: 125 Cel; Quick Connects Description: 2G-2GR; No. of Elements: 2;
TT180F08KFL-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Quick Connects Description: 2G-2GR; Non Repetitive Peak On-state Current: 6000 A; Maximum On-state Current: 180 A; Repetitive Peak Reverse Voltage: 800 V;
TT180F08KEB-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Repetitive Peak Reverse Voltage: 800 V; Quick Connects Description: 2G-2GR; Non Repetitive Peak On-state Current: 6000 A; No. of Elements: 2;
TT180F08KEM-K
SCR; Configuration: COMMON CATHODE, 2 ELEMENTS; Maximum Operating Temperature: 125 Cel; Quick Connects Description: 2G-2GR; Screw Terminals Description: 2A-CK; No. of Elements: 2;
TT180F08KEC-K
SCR; Configuration: COMMON CATHODE, 2 ELEMENTS; Quick Connects Description: 2G-2GR; Repetitive Peak Reverse Voltage: 800 V; Screw Terminals Description: 2A-CK; Non Repetitive Peak On-state Current: 6000 A;
TT180F08KFC
SCR; Non Repetitive Peak On-state Current: 6000 A; Maximum Operating Temperature: 125 Cel; Screw Terminals Description: A-K-AK; Quick Connects Description: 2G-2GR; Repetitive Peak Reverse Voltage: 800 V;
TT180F08KFB-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Non Repetitive Peak On-state Current: 6000 A; No. of Elements: 2; Maximum Operating Temperature: 125 Cel; Quick Connects Description: 2G-2GR;
TT180F08KEL-A
SCR; Configuration: COMMON ANODE, 2 ELEMENTS; Screw Terminals Description: 2K-CA; Repetitive Peak Reverse Voltage: 800 V; Quick Connects Description: 2G-2GR; Maximum Operating Temperature: 125 Cel;
TT180F08KFC-K
SCR; Configuration: COMMON CATHODE, 2 ELEMENTS; Quick Connects Description: 2G-2GR; No. of Elements: 2; Repetitive Peak Reverse Voltage: 800 V; Maximum On-state Current: 180 A;
TT180F08KEC
SCR; Maximum On-state Current: 180 A; Non Repetitive Peak On-state Current: 6000 A; Maximum Operating Temperature: 125 Cel; Quick Connects Description: 2G-2GR; Repetitive Peak Reverse Voltage: 800 V;
TT180F08KEM
SCR; Non Repetitive Peak On-state Current: 6000 A; Maximum Operating Temperature: 125 Cel; Quick Connects Description: 2G-2GR; Screw Terminals Description: A-K-AK; Maximum On-state Current: 180 A;
TT180F08KEB
SCR; Maximum Operating Temperature: 125 Cel; Maximum On-state Current: 180 A; Repetitive Peak Reverse Voltage: 800 V; Screw Terminals Description: A-K-AK; Non Repetitive Peak On-state Current: 6000 A;
TT180F08KEB-K
SCR; Configuration: COMMON CATHODE, 2 ELEMENTS; Quick Connects Description: 2G-2GR; Maximum On-state Current: 180 A; No. of Elements: 2; Screw Terminals Description: 2A-CK;
TT180F08KEL
SCR; Maximum On-state Current: 180 A; Non Repetitive Peak On-state Current: 6000 A; Screw Terminals Description: A-K-AK; Maximum Operating Temperature: 125 Cel; Repetitive Peak Reverse Voltage: 800 V;
TT180F08KFB-K
SCR; Configuration: COMMON CATHODE, 2 ELEMENTS; Non Repetitive Peak On-state Current: 6000 A; Maximum On-state Current: 180 A; Quick Connects Description: 2G-2GR; Maximum Operating Temperature: 125 Cel;
TT180F08KSL
Eupec & Kg
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved