Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Terminal Finish: TIN;
Median Price
$1.310
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$1.070
100+ parts
$0.579
1k+ parts
$0.505
10k+ parts
-
Chip1Stop
$0.738
$0.663
$0.653
DigiKey
$1.390
$0.816
$0.711
$0.684
Newark
$1.490
$0.871
$0.760
Element14
$1.760
$1.040
$0.900
$0.845
Mouser Electronics
$2.420
$1.130
$0.788
$0.671
RS (Exports)
$0.781
Rochester
$0.830
$0.689
$0.614
Verical
$0.861
$0.768
Digiode
$0.633
Nova Conductors
$0.852
Rutronik
$0.561
Vyrian
Ampacity Inc.
$0.570
Corphita
$0.599
Component Stockers USA
$0.680
$0.640
$0.580
$0.750
Argo Parts USA
Continental Prestige Electronics
$0.835
Netroflash
Modulus Dynamics
$5.208
$5.000
$4.791
Aztec Data Supply Inc.
$5.318
Corohmni
$8.046
Perfect Parts
RC Electronics
$2.760
$2.600
$2.550
Authorized Procurement Solutions
Futuretech Components
Fixed Regulators - Positive Single Output LDO TLS835B2ELVSEXUMA1 attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Infineon Technologies
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Regulator Type:
Terminal Finish:
TLS835B2ELVSEXUMA1 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
TPS7B6950QDCYRQ1
Texas Instruments
TPS7B6950QDCYRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.8V, suitable for applications requiring stable voltage regulation in automotive environments. It features a small outline package style, matte tin terminal finish, and can handle an output current of up to 150mA efficiently.
LP5951MG-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3.5 %;
LM2937IMP-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 4.8 %;
TPS76833QPWPRG4
TPS76833QPWPRG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes small outline, heat sink/slug, thin profile, and shrink pitch features for efficient mounting on PCBs.
MIC5353-3.3YMT-TR
Microchip Technology
MIC5353-3.3YMT-TR by Microchip: LDO regulator with 3.3V output, 0.5A max current, and 6V input. Ideal for applications requiring low dropout voltage, such as portable devices or IoT sensors. Package style is small outline with very thin profile, suitable for space-constrained designs.
LT1763CS8-3#PBF
Analog Devices
Analog Devices' LT1763CS8-3#PBF is a fixed positive single output LDO regulator with a max output current of 0.5A and a nominal output voltage of 3V. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring precise voltage regulation in compact electronic devices.
MIC5323-3.3YD5-TR
MIC5323-3.3YD5-TR by Microchip is a 3.3V Fixed Positive Single Output LDO Regulator with 0.17V max dropout voltage, ideal for applications requiring stable voltage supply in compact spaces. Operating temperature ranges from -40 to 125°C, making it suitable for various environments. With a max output current of 0.3A and small outline package style, it offers efficient power regulation for electronics with limited space constraints.
ADM7172ACPZ-2.5-R7
ADM7172ACPZ-2.5-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 2A max output current, 2.5V nominal output voltage, and 1.5% max voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its very thin profile chip carrier package style.
TLV70033DCKR
TLV70033DCKR by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.25 V. It operates at temperatures ranging from -40°C to 125°C and has a max output current of 0.2 A. This regulator is commonly used in applications that require stable and reliable power supply, such as consumer electronics and industrial equipment.
TK71550SCL
Toko
TK71550SCL by Toko is a fixed positive single output LDO regulator with 5V nominal output voltage. It has a max dropout voltage of 0.33V and can handle up to 0.1A output current. Ideal for applications requiring stable voltage regulation in compact spaces, such as consumer electronics or IoT devices.
LM1117MPX-2.5/NOPB
LM1117MPX-2.5/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.8A, suitable for applications requiring stable voltage supply in compact spaces. It features a small outline package style, matte tin terminal finish, and operates within a temperature range of 0 to 125°C, making it ideal for various electronic devices needing reliable power regulation.
TLV1117LV25DCYR
TLV1117LV25DCYR by Texas Instruments is a fixed positive single output LDO regulator with 2.5 V nominal output voltage and 1 A max output current. It operates in temperatures ranging from -40 to 125 °C and has a max dropout voltage of 0.8 V, making it ideal for various electronic applications requiring stable voltage regulation.
MCP1826ST-3302E/DB
MCP1826ST-3302E/DB by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 3.3V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LT1963AEQ-3.3#TRPBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
TPS7A2033PDBVR
TPS7A2033PDBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It has a small outline, low profile package style with matte tin terminal finish, making it suitable for applications requiring precise voltage regulation in compact spaces at temperatures ranging from -40 to 125°C.
LP2992AIM5-5.0/NOPB
LP2992AIM5-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.25A max output current, and 4.5% max voltage tolerance. It is ideal for applications requiring low dropout voltage and operates within -40 to 125°C temperature range.
PTPS7A2033PDBVR
The Texas Instruments PTPS7A2033PDBVR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.14V, suitable for applications requiring stable power supply in a compact form factor. With a max output current of 0.3A and operating temperature range from -40°C to 125°C, it is ideal for use in various electronic devices where space and efficiency are crucial factors.
MIC5219-3.3YM5-TR
MIC5219-3.3YM5-TR by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, suitable for applications requiring low dropout voltage and precise voltage regulation in the temperature range of -40 to 125°C.
SPX3819M5-L-2.5/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Width: 1.6 mm;
MCP1711T-33I/5X
MCP1711T-33I/5X by Microchip: LDO regulator with 3.3V output, 0.15A max current, and 1% voltage tolerance. Ideal for applications requiring stable low-dropout voltage regulation in a compact form factor. Operates b/w -40 to 125°C, making it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT3055IDE-5#PBF
TLS810A1LDV33XUMA1
Infineon's TLS810A1LDV33XUMA1 is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. Operating in temperatures from -40 to 150°C, it features a small outline package suitable for surface mount applications. Ideal for automotive electronics due to AEC-Q100 screening level and high input voltage tolerance up to 45V.
TLS810B1LDV33XUMA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: SON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 2 %; Package Body Material: PLASTIC/EPOXY;
TLS820F0ELV33XUMA1
Infineon's TLS820F0ELV33XUMA1 is a 3.3V fixed positive LDO regulator with a max dropout voltage of 0.35V, ideal for applications requiring stable voltage output. With a compact package style and low profile design, it offers high reliability in automotive electronics, operating within -40 to 150°C temperature range.
TLS850B0TEV50ATMA1
Infineon's TLS850B0TEV50ATMA1 is a fixed positive LDO regulator with 5V output, 0.5A max current, and 2% voltage tolerance. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40°C to 150°C with a compact Gull Wing package design.
TLS810D1LDV33XUMA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2.12 %;
TLS820D0ELV33XUMA1
Infineon Technologies' TLS820D0ELV33XUMA1 is a fixed positive single output LDO regulator with a max output current of 0.2 A and a dropout voltage of 0.16 V. It is commonly used in applications requiring stable voltage regulation, such as automotive electronics and industrial control systems.
TLS820F0ELV50XUMA1
Infineon's TLS820F0ELV50XUMA1 is a fixed positive single output LDO regulator with a 5V nominal output voltage and 0.2A max output current. Operating in temperatures from -40 to 150°C, it features a small outline package suitable for various applications in automotive electronics, ensuring stable power supply with low dropout voltage of 0.34V.
TLS850B0TBV50ATMA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; JESD-609 Code: e3; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1;
TLS850F0TAV50ATMA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 7; Package Code: TO-263; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Package Body Material: PLASTIC/EPOXY;
TLS850B0TEV33ATMA1
Infineon's TLS850B0TEV33ATMA1 is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It operates in a temperature range from -40°C to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With AEC-Q100 screening level certification, this compact rectangular package with gull wing terminals offers reliable performance for automotive electronics.
TLS810B1EJV50XUMA1
The Infineon Technologies TLS810B1EJV50XUMA1 is a fixed positive single output LDO regulator with a max dropout voltage of 0.55V and an operating temperature range of -40°C to 150°C. It is commonly used in automotive applications due to its AEC-Q100 screening level and small outline, low profile package style.
TLS820B2ELVSEXUMA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;
TLS850F0TAV33ATMA1
The Infineon Technologies TLS850F0TAV33ATMA1 is a fixed positive single output LDO regulator with a max output current of 0.5 A and a dropout voltage of 0.43 V. It is suitable for applications requiring a stable output voltage of 3.3 V, such as automotive electronics or industrial control systems.
TLS810B1LDV50
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %;
TLS810B1LDV50XUMA1
Infineon's TLS810B1LDV50XUMA1 is a fixed positive single output LDO regulator with a 5V nominal output voltage and 0.1A max output current. Operating temperature ranges from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces. The package style is small outline with no-lead terminals, ideal for surface mount assembly in space-constrained designs.
TLS805B1LDV50XUMA1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HTSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 2 %; Minimum Output Voltage-1: 4.9 V;
TLS810A1LDV50
TLS810C1EJV33
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2.12 %;
TLS810C1EJV33XUMA1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved