Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; No. of Segments: 2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Modulus Dynamics
$13.441
$12.903
$12.366
Authorized Procurement Solutions
Perfect Parts
Corphita
Graphics Display Drivers TLD5045EJ attributes and parameters. Explore more Graphics Display Drivers devices from Infineon Technologies
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TLD5045EJ Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Lite-on Semiconductor
Nte Electronics
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Microchip Technology
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Silicon Standard
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Cheng-yi Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PCF8576CT/1,112
NXP Semiconductors
PCF8576CT/1,112 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It has a small outline package style, operates at temperatures ranging from -40 to 85 °C, and is commonly used in liquid crystal display driver applications.
TPS92518PWPR
TPS92518PWPR by Texas Instruments is a 24-terminal LED display driver with serial data input mode. It operates b/w -40 to 125 °C, suitable for automotive applications. With a max supply voltage of 42 V and small outline package style, it offers efficient graphics display driving capabilities.
TPS92640PWPT/NOPB
TPS92640PWPT/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 85V and power supplies of 24V. It operates in automotive-grade temperatures from -40 to 125°C, providing constant-current output for LED displays. With a small outline package style and dual terminal position, it's ideal for various automotive lighting applications.
PCA9632TK,118
NXP Semiconductors' PCA9632TK,118 is a serial input LED display driver with 4 segments. It operates b/w -40 to 85°C and supports a supply voltage range of 2.3-5.5V. Ideal for industrial applications requiring small outline, thin profile packages.
LT3475EFE-1#PBF
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;
FAN5640S7X
Onsemi
FAN5640S7X by Onsemi is a LED display driver with 4 segments, operating voltage range of 6-20V. It has a compact thin profile package suitable for industrial applications. With dual terminals and matte tin finish, it can handle temperatures from -40 to 85°C efficiently.
TLC5947RHBR
TLC5947RHBR by Texas Instruments is a graphics display driver with 24 channels, CMOS technology, and serial data input mode. It operates b/w -40 to 85°C, suitable for industrial applications. With a max supply voltage of 5.5V and terminal pitch of 0.5mm, it's ideal for LED display driver interfaces in compact designs.
AS1108WL-T
Ams Ag
AS1108WL-T by Ams Ag is a 20-terminal LED display driver with serial data input mode, suitable for multiplexed displays. Operating voltage range of 2.7V to 5.5V, with max frequency of 10MHz and commercial temperature grade up to 70°C. Ideal for applications requiring compact small outline package style and gull wing terminal form.
LM3914N-1
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
LTC3219EUD#PBF
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
LM3914VX/NOPB
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
PCA9622DR,118
PCA9622DR,118 by NXP Semiconductors is a LED display driver with 16 segments. It operates at 1 MHz max frequency and supports serial data input mode. Ideal for industrial applications, it has a small outline package style and can handle supply voltages ranging from 2.3V to 5.5V.
TLC5947DAP
TLC5947DAP by Texas Instruments is a graphics display driver with 24 channels, CMOS technology, and serial data input mode. It operates b/w -40 to 85 °C with a supply voltage range of 3-5.5 V. Ideal for LED display drivers in industrial applications due to its small outline package and standard input characteristics.
CL220K4-G
Supertex
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR;
NSVD4001DR2G
NSVD4001DR2G by Onsemi is a Graphics Display Driver with 8 terminals, operating temperature range of -40 to 125°C, and supply voltage of 12V. It is ideal for automotive applications due to its small outline package style and LED display driver interface IC type.
MXHV9910BETR
IXYS Corporation
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
LP5523TMX/NOPB
Display Drivers; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 25; Package Code: FBGA; Package Shape: SQUARE;
LT3797IUKG#TRPBF
Analog Devices
LT3797IUKG#TRPBF by Analog Devices is a LED display driver with 47 terminals, operating voltage range of 2.5V to 40V, and automotive temperature grade. It comes in a rectangular chip carrier package suitable for graphics displays, offering true output polarity and standard input characteristics.
UAA180
Infineon Technologies
UAA180 by Infineon Technologies is a Graphics Display Driver with 12 segments and 18 terminals. It operates b/w -25°C to 85°C, with a supply voltage range of 10V to 18V. This rectangular package in-line driver is ideal for segment display applications requiring bipolar technology.
PCA9685PW/Q900,118
NXP Semiconductors' PCA9685PW/Q900,118 is a 28-terminal LED display driver with serial data input mode and 16 segments. Operating b/w -40 to 85 °C, it supports a supply voltage range of 2.3-5.5 V for industrial applications requiring precise graphics display control in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLD5190QVXUMA1
LED DISPLAY DRIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
TLD5045EJXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
TLD55411QVXUMA1
TLD55411QVXUMA1 by Infineon Technologies is a graphics display driver with a serial data input mode. It has a max supply voltage of 36V and is suitable for LED display driver applications.
TLD5097EL
TLD5097EL by Infineon Technologies is a LED display driver with 14 terminals, suitable for graphics applications. It operates b/w 8V to 34V, meeting AEC-Q100 standards. The small outline package measures 3.9mm x 4.9mm with a low profile of 1.7mm, making it ideal for compact designs in automotive and industrial displays.
TLD5098ELXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
TLD5097ELXUMA1
LED DISPLAY DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;
TLD5099EPXUMA1
LED DISPLAY DRIVER; JESD-609 Code: e3; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 2A;
TLD5541-1QU
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HTFQFP; Package Shape: SQUARE; Terminal Pitch: .5 mm;
TLD5098ELXUMA2
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
TLD5541-1QV
LED DISPLAY DRIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Position: QUAD;
TLD5098EP
LED DISPLAY DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;
TLD5097EP
LED DISPLAY DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: TIN;
TLD5098EPXUMA1
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 2A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
TLD5191ES
LED DISPLAY DRIVER;
TLD55411QUXUMA1
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 3; Terminal Finish: NICKEL GOLD PALLADIUM SILVER;
TLD5097EPXUMA1
LED DISPLAY DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): NOT SPECIFIED; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;
TLD5099EP
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HTSSOP; Package Shape: RECTANGULAR; Screening Level: AEC-Q100;
TLD5098EL
TLD5098EL by Infineon Technologies is a Graphics Display Driver with 14 terminals, operating at supply voltages b/w 4.5V to 45V. It features a small outline package style and gull wing terminal form, suitable for LED display driver applications requiring a max seated height of 1.7mm and a min fmax of 0.5MHz.
TLD5190QUXUMA1
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HTFQFP; Package Shape: SQUARE; Minimum Supply Voltage: 8 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved