Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
1EDN7550UXTSA1 by Infineon Technologies is a MOSFET Gate Driver with 6 terminals, operating voltage range of 4.5V to 20V, and high side driver capability. It features a small outline package with dimensions of 1.5mm x 1.1mm x 0.4mm, suitable for applications requiring fast turn-on/off times such as power electronics and motor control systems.
Median Price
$0.756
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$0.708
100+ parts
$0.422
1k+ parts
$0.346
10k+ parts
$0.340
Newark
$0.803
$0.449
$0.386
-
Mouser Electronics
$1.020
$0.524
$0.500
$0.416
Rochester
$0.428
$0.355
$0.317
DigiKey
$0.530
Verical
$0.444
$0.396
Flip Electronics (Authorized)
Chip1Stop
$0.474
Farnell
$0.809
$0.563
$0.526
Element14
$0.835
$0.578
$0.496
RS (Exports)
$1.080
$0.872
Digiode
$0.349
Nova Conductors
$0.614
Vyrian
Flip Electronics
IBS Electronics
$0.491
VNN
Semicontronic
$0.269
$0.262
$0.261
Ampacity Inc.
$0.293
Corphita
$0.330
Component Stockers USA
$0.510
$0.480
$0.430
$0.420
Argo Parts USA
$0.595
Netroflash
$0.601
Continental Prestige Electronics
$1.250
$0.704
Corohmni
$10.963
Aztec Data Supply Inc.
$11.054
Modulus Dynamics
$13.055
$12.533
$12.011
Authorized Procurement Solutions
The use of plastic/epoxy material makes this product lightweight and durable, perfect for long-term use.
With surface mount capability, this product is easy to install and saves space on a circuit board.
The high maximum supply voltage allows for versatility in a variety of applications.
The rectangular shape of the package makes it easy to handle and integrate into existing systems.
The six terminals provide flexibility and options for connecting to other components in a circuit.
The small outline and thin profile make this product ideal for compact designs.
The low minimum supply voltage ensures compatibility with a wide range of power sources.
With a high maximum operating temperature, this product can withstand demanding conditions.
The low minimum operating temperature ensures reliable performance even in cold environments.
The tin terminal finish provides excellent conductivity and corrosion resistance for long-lasting performance.
The dual terminal position allows for easy and secure connections in a circuit.
The low maximum seated height saves space and allows for compact designs.
The narrow width of the product is suitable for applications with limited space.
The high side driver feature allows for efficient control and management of high-side components in a circuit.
The compact length of the product is ideal for designs where space is limited.
The no-lead terminal form simplifies installation and reduces the risk of soldering errors.
The differential input characteristics provide accurate and reliable signal processing.
The 12 V nominal supply voltage is a common standard, ensuring compatibility with many systems.
The fast turn-on time ensures rapid response and high efficiency in switching operations.
The small terminal pitch allows for close placement of terminals, saving space on a circuit board.
The 8 A nominal output peak current limit provides robust power handling capabilities for demanding applications.
The buffer or inverter-based MOSFET driver interface IC type offers flexibility for various control requirements.
The fast turn-off time ensures quick and efficient switching performance.
MOSFET Gate Drivers 1EDN7550UXTSA1 attributes and parameters. Explore more MOSFET Gate Drivers devices from Infineon Technologies
High Side Driver:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
1EDN7550UXTSA1 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
MIC4427YM-TR
Microchip Technology
MIC4427YM-TR by Microchip: MOSFET Gate Driver with 18V max supply voltage, 1.5A output peak current limit, and 0.08us turn-on time. Ideal for industrial applications requiring high side drivers in a small outline package.
ISO5851DWR
ISO5851DWR by Texas Instruments is a MOSFET Gate Driver with 16 terminals, operating voltage range of 3-30V, and output current up to 5A. It has a small outline package style suitable for automotive applications. With fast turn-on/off times of 0.11us, it's ideal for driving IGBT/MOSFET in automotive systems.
EL7202CSZ-T7
Intersil
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7380MX_OP
FAN7380MX_OP by Onsemi is a MOSFET gate driver with 2 functions, operating at -40 to 125 °C. It has a supply voltage range of 10-20 V and features Schmitt trigger input characteristics. Ideal for automotive applications requiring high side drivers in compact designs.
UCC27211DRMR
UCC27211DRMR by Texas Instruments is a MOSFET gate driver with 2 channels, 12V nominal voltage, and 4A max output current. It is designed for automotive applications, featuring a small outline package style and very thin profile. With high side drivers and true output polarity, it operates in temperatures ranging from -40 to 140°C.
LTC4440EMS8E#PBF
LTC4440EMS8E#PBF by Analog Devices is a MOSFET gate driver with 1 function and a small outline, thin profile package. It operates in an industrial temperature range of -40 to 85°C and has a nominal voltage of 12V. This driver is commonly used as a buffer or inverter based MOSFET driver.
LTC7000IMSE#PBF
LTC7000IMSE#PBF by Analog Devices is a MOSFET Gate Driver with 135V max supply voltage, 3.5V min supply voltage, and 0.07us turn-on/off time. Ideal for automotive applications due to its CMOS technology and high side driver feature.
MIC4452YM
MIC4452YM by Microchip Technology is a MOSFET Gate Driver with 18V max supply voltage, 12A output peak current limit, and 0.14us turn-on time. Ideal for industrial applications requiring high-speed switching and precise control of power MOSFETs in harsh environments.
MCP1402T-E/OT
MCP1402T-E/OT by Microchip is a MOSFET Gate Driver with 18V max supply voltage, operating temp of -40 to 125 °C. Ideal for automotive applications, it features Schmitt Trigger input, 0.5A output peak current limit, and 0.079us turn-on time.
LM5101ASD/NOPB
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
SI8231AB-D-IS1
Silicon Labs
SI8231AB-D-IS1 by Silicon Labs is a MOSFET gate driver with 16 terminals, operating voltage range of 4.5-24V, and built-in under voltage protection. It has a turn-on/off time of 0.045us and supports high side drivers. Ideal for applications requiring precise control over power supplies in compact spaces.
LM5050MKX-1
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
IR2110STRPBF
International Rectifier
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
TD350ETR
STMicroelectronics TD350ETR is a MOSFET gate driver with 14 terminals and small outline package style. It operates b/w -40 to 125 °C, suitable for automotive applications. Features include max supply voltage of 26 V, turn-on time of 0.65 us, and interface IC type as half bridge based IGBT/MOSFET driver.
FAN3100TSX
Fairchild Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
IR2114SSPBF
HALF BRIDGE BASED IGBT DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
MIC4604YMT-TR
Micrel
HALF BRIDGE BASED MOSFET DRIVER; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: SON; Package Shape: RECTANGULAR; Surface Mount: YES;
MIC4468YWM
AND GATE BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ZXGD3004E6TA
ZXGD3004E6TA by Diodes Inc. is a MOSFET gate driver with a max supply voltage of 40V and nominal output peak current limit of 8A. Its small outline, low profile package makes it suitable for various applications requiring high-speed switching such as power supplies and motor control systems.
L6387ED013TR
L6387ED013TR by STMicroelectronics is a MOSFET gate driver with a max supply voltage of 17V and nominal output peak current limit of 0.65A. It is designed for high side driver applications, featuring a small outline package style and BCD technology. Ideal for compact systems requiring efficient power management in automotive or industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1EDN7512BXTSA1
Infineon Technologies
1EDN7512BXTSA1 by Infineon: MOSFET Gate Driver with 20V max supply, 4.5V min supply, 0.025us turn-on/off time. Ideal for buffer or inverter-based applications due to small outline and low profile design.
1EDN7511BXUSA1
1EDN7511BXUSA1 by Infineon Technologies is a MOSFET Gate Driver with 6 terminals, operating voltage range of 4.5-20V, and output polarity as TRUE. It has a turn-on/off time of 0.025 us, suitable for applications requiring a small outline driver with push-pull output characteristics in compact spaces.
1EDN8511BXUSA1
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Terminal Pitch: .95 mm;
1EDN7550BXTSA1
1EDN7550BXTSA1 by Infineon is a MOSFET Gate Driver with 6 terminals, operating voltage range of 4.5-20V, and high side driver feature. It has a small outline package style, turn-on/off time of 0.055 us, and nominal output peak current limit of 8A. Ideal for applications requiring fast switching speeds in compact designs like power supplies and motor control systems.
1EDN8550BXTSA1
1EDN8550BXTSA1 by Infineon: MOSFET Gate Driver with 20V max supply, 8A peak current limit, and 0.055us turn-on/off time. Ideal for high-side driver applications in compact spaces due to small outline and low profile package style.
1EDN7512GXTMA1
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Minimum Supply Voltage: 4.5 V;
1EDN7550U
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; No. of Functions: 1;
1EDN8511B
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 4 A;
1EDN8511BXTSA1
BUFFER OR INVERTER BASED MOSFET DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
1EDN6550BXTSA1
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G6;
1EDN7136G
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Finish: NICKEL GOLD PALLADIUM;
1EDN7512B
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; High Side Driver: NO;
1EDN7511BXTSA1
BUFFER OR INVERTER BASED MOSFET DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
1EDN7126G
1EDN7146G
1EDN7512G
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE;
1EDN6550B
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Input Characteristics: DIFFERENTIAL;
1EDN7116G
1EDN7511B
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Turn-on Time: .025 us;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved