Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ZM90G20F01 by Honeywell is a SPDT snap action/limit switch with roller lever actuator. It has a max operating temperature of 120°C and can handle up to 10.1A@250VAC. Ideal for applications requiring momentary switch action in industrial settings.
Median Price
$3.048
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$2.740
100+ parts
$1.880
1k+ parts
$1.730
10k+ parts
-
Mouser Electronics
$3.720
$2.620
$2.350
$2.340
DigiKey
$3.830
$2.623
Newark
$4.090
$2.640
$2.520
Element14
$4.800
$3.010
TTI
$2.610
$2.380
Master Electronics
$2.690
$2.280
$2.250
Verical
$3.165
$2.682
Powell Electronics
$2.510
$2.310
Chip1Stop
$2.930
Electro Sonic
$2.650
$2.230
$2.200
Nova Conductors
Rapid Electronics
$2.948
IBS Electronics
$2.834
Ampacity Inc.
$1.820
Assy Fe
Authorized Procurement Solutions
Continental Prestige Electronics
Perfect Parts
Argo Parts USA
Aranea Global
The wide body allows for easy installation and secure mounting.
Single Pole Double Throw functionality provides versatility in electrical connections.
Low profile design for space-saving installation in compact environments.
Suitable for use in a wide range of temperature conditions.
High current rating enables reliable operation with various electrical loads.
Ideal for applications in harsh cold environments.
Provides corrosion resistance and ensures a durable electrical connection.
Roller lever actuator offers precise and reliable switching action.
Combines the quick response of snap acting with the precision of a limit switch.
Can handle high voltage and current to support various electrical equipment.
Compact design for versatile mounting options in different applications.
Provides a consistent actuation force for reliable switching performance.
Suitable for applications where a temporary electrical connection is required.
Secure soldered connections ensure high reliability in electrical circuits.
Can safely switch high voltage AC circuits for various applications.
Allows for easy and secure mounting on circuit boards or panels at a right angle orientation.
Snap Action & Limit Switches ZM90G20F01 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Type (Actuator):
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
JESD-609 Code:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Termination Type:
ZM90G20F01 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Comchip Technology
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Yangzhou Yangjie Electronics
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
V7-7B29D8
Honeywell Sensing And Control
V7-7B29D8 by Honeywell is a SPST snap action/limit switch with 10.16" body width, 15.88mm height, and 2.46mm actuator travel. It has a max AC contact current of 11A@277VAC and DC contact current of 0.5A@125VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
Z-15GK355-B
Omron
Omron Z-15GK355-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and sealing rating of IP62. With a max AC contact current of 15A@250VAC, it is ideal for panel mounting applications requiring momentary switch action.
D3D-131
Omron's D3D-131 is a snap action/limit switch with SPST function, 100000 cycles electrical life, and 1A@125VAC AC max rating. With a plunger actuator type and 9mm travel, it is ideal for panel mounting applications requiring momentary switch action in temperatures ranging from -30 to 60°C.
ZCD29
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
914CE3-3AK
The Honeywell Sensing And Control 914CE3-3AK is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a steel roller actuator, it has 4.8mm travel and 12.01N operating force. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
BZ-RSX
BZ-RSX by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. Featuring a hardened steel plunger actuator, it has a body width of 17.45 inch and max DC contact current of 0.5 A. Ideal for panel mounting applications requiring precise switching capabilities.
D2F-FL2-D3
Omron's D2F-FL2-D3 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator, it has IP40 sealing and operates b/w -25 to 65 °C. Ideal for panel mounting applications, it can handle up to 1A@125VAC AC load and 0.5A@30VDC DC load.
B3J-3100
The Omron B3J-3100 is a SPST snap acting/limit switch with 3000000 cycle electrical life. With a body width of 12 inch and height of 3.5 mm, it operates b/w -25 to 70 °C. Ideal for panel mounting applications, it has a max operating force of 1.76 N and DC contact voltage of 24 V at 0.05 A current rating.
WLG2-LDS-DGJS03
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: WL;
D2MQ-1-TL
Omron's D2MQ-1-TL is a SPDT snap action/limit switch with 30VDC, 0.5A rating. Featuring SILVER contacts, it has 100mohm resistance and 30000 cycle electrical life. Ideal for applications requiring momentary switch action in temperatures ranging from -15 to 70 °C.
D3SH-B1R
Omron's D3SH-B1R snap action switch has a 100000 cycle electrical life, SPST switch function, and 3.8mm actuator travel. With a max operating force of 0.3N, it is ideal for applications requiring momentary switch action in temperatures ranging from -25°C to 85°C.
D5B-1011
Omron's D5B-1011 snap action switch has IP67 sealing, 5000000 cycle electrical life, and 1.3mm actuator travel. Ideal for panel mounting applications with a max operating force of 0.98N and momentary switch action.
D2F-L2-A
Omron's D2F-L2-A snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a max AC contact current of 3A@125VAC, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 65 °C.
SS-5GL2T
Omron SS-5GL2T is a SPDT snap action/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and operates in temperatures ranging from -25 to 85°C. Ideal for panel mounting applications, it features a hinge roller lever actuator with 2mm travel.
ESE58R61B
Panasonic
The Panasonic ESE58R61B is a SPST snap action/limit switch with 50000 cycles electrical life. With a body width of 3", it has a max operating force of 0.3N and actuator travel of 1.4mm. Ideal for applications requiring momentary switch action, surface mount-right angle mounting, and solder termination type.
51ML10-E1
SS-5GL2-F-3T
LSXA3K-2K
LSXA3K-2K by Honeywell is an explosion-proof snap action switch with SPDT function. It operates b/w -12°C to 121°C, suitable for various industrial applications. Featuring a side rotary actuator, it has a max contact voltage of 250V DC and 600V AC, making it ideal for panel mounting with wire termination.
ZM90G70A01
ZM90G70A01 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 6.4" body width, 10.6mm height, and PIN PLUNGER actuator type. It has a max operating temperature of 120°C and can handle up to 10.1A@250VAC current. Ideal for panel mounting applications requiring momentary switch action with quick connect termination.
602EN1-6
The Honeywell Sensing And Control 602EN1-6 is a corrosion-proof DPDT snap action/limit switch with a plunger actuator. It has a max DC contact voltage of 28V and can handle up to 7A@28VDC. Ideal for panel mounting applications requiring momentary switch action.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Manufacturer Series: ZM; Termination Type: QUICK CONNECT;
ZM90G20B03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): SHORT STRAIGHT LEVER; Body Length/Diameter: 19.8 mm; Termination Type: SOLDER;
ZM90G20B04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): SHORT STRAIGHT LEVER; Manufacturer Series: ZM; Maximum Operating Force: 2.44 N;
ZM90G20C01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): STANDARD STRAIGHT LEVER; Body Height: 6.4 mm; Maximum Operating Force: 2.44 N;
ZM90G20C03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STANDARD STRAIGHT LEVER; Maximum Operating Force: 2.44 N; Termination Type: SOLDER;
ZM90G20C04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): STANDARD STRAIGHT LEVER; Body Length/Diameter: 19.8 mm; Maximum AC Contact Current: 10.1 A;
ZM90G20D01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): LONG STRAIGHT LEVER; Maximum Operating Force: 2.44 N; Body Height: 6.4 mm;
ZM90G20D04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LONG STRAIGHT LEVER; AC Maximum Rating R Load (Contact): 10.1A@250VAC; Maximum Operating Temperature: 120 Cel;
ZM90G20E01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Length/Diameter: 19.8 mm; Body Height: 6.4 mm;
ZM90G20E03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Operating Temperature: 120 Cel; Additional Features: MICRO SWITCH;
ZM90G20E04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Minimum Operating Temperature: -40 Cel; Maximum AC Contact Voltage: 250 V;
ZM90G20F03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): ROLLER LEVER; Maximum AC Contact Current: 10.1 A; Body Height: 6.4 mm;
ZM90G20H04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Maximum AC Contact Voltage: 250 V; Switch Action: MOMENTARY;
ZM90G20J04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LONG STRAIGHT LEVER; Maximum Operating Force: 2.44 N; Manufacturer Series: ZM;
ZM90G20K03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LONG STRAIGHT LEVER; Maximum AC Contact Current: 10.1 A; Additional Features: MICRO SWITCH;
ZM90G20L03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Body Width: 10.6 inch; Maximum Operating Force: 2.44 N;
ZM90G20L04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): LEVER; Additional Features: MICRO SWITCH; Termination Type: SOLDER;
ZM90G20M01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Operating Force: 2.44 N; Additional Features: MICRO SWITCH;
ZM90G20M03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Body Width: 10.6 inch; Minimum Operating Temperature: -40 Cel;
ZM90G20M04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): SIMULATED ROLLER LEVER; Body Height: 6.4 mm; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved