Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
V7-1V19E9 by Honeywell is a SPDT snap action/limit switch with 10.16" body width and 15.86mm height. It has a max AC contact current of 5A@277VAC, ideal for panel mounting applications requiring momentary switch action with plastic plunger actuator.
Median Price
$6.410
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
RS Americas
1+ parts
$3.760
100+ parts
-
1k+ parts
10k+ parts
Arrow
$5.403
$5.020
Chip1Stop
$5.830
DigiKey
$6.640
$4.552
$4.513
Sager
$7.090
$6.230
$5.690
RS (Exports)
$7.440
Mouser Electronics
$11.400
$7.210
$6.280
Powell Electronics
$17.120
$15.410
$13.870
$9.700
Master Electronics
$3.950
$3.750
Verical
$4.647
$4.435
Farnell
$8.400
Newark
$6.180
TTI
Distrelec
Nova Conductors
$4.671
Vyrian
IBS Electronics
$5.569
$5.287
Q Components
Connector Distribution Corp
Right Parts Inc.
Ampacity Inc.
$3.150
Continental Prestige Electronics
$8.090
$6.510
Allen Electronics Distributors
$8.470
Component Stockers USA
$9.540
$7.660
Neutron USA
$62.550
Authorized Procurement Solutions
Assy Fe
Aranea Global
Argo Parts USA
Wide body width ensures stability and durability, making this switch reliable for long-term use.
SPDT function allows for flexibility in controlling multiple circuits with a single switch, making it versatile for various applications.
Compact body height makes this switch suitable for installations where space is limited.
Supporting a high AC contact current of 5A allows this switch to handle demanding electrical loads with ease.
The actuator's travel distance of 2.46mm ensures precise and responsive switching action.
Plastic plunger actuator material offers durability and reliability in various operating conditions.
Snap acting switch type provides quick and reliable contact closure, ideal for applications requiring immediate response.
High AC maximum rating allows for efficient power handling, ensuring reliable performance in high voltage applications.
Compact body length/diameter design makes installation and integration easy in various equipment and machinery.
Low operating force requirement of 1.72N ensures easy activation of the switch, reducing user fatigue.
Momentary switch action allows for temporary contact closure, suitable for applications where continuous circuit engagement is not required.
Quick connect termination simplifies installation and maintenance procedures, saving time and effort.
Supporting a high AC contact voltage of 277V ensures compatibility with a wide range of electrical systems and applications.
Minimal pre-travel distance of 1.19mm ensures fast and reliable switching response, enhancing overall operational efficiency.
Panel mount design allows for secure and stable installation on various surfaces, ensuring reliable performance in different mounting configurations.
Snap Action & Limit Switches V7-1V19E9 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Mounting Feature:
Maximum Operating Force:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
V7-1V19E9 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
PCN Design/Specification - Alternative Resin 29/MAR/2022
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Dc Components
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148WS
General Semiconductor
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Comchip Technology
LM317T/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
311SM703-T
311SM703-T by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 9.31mm actuator travel. It has a max AC contact current of 4A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with wire termination.
LSA1A
LSA1A by Honeywell Sensing And Control is a SPDT snap action/limit switch with IP67 sealing. It has a max operating temperature of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications, this switch features a side plunger actuator with 75mm travel distance.
11SM401-H2-C
11SM401-H2-C by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.64mm actuator travel. It has a max AC contact current of 5A@250VAC and 0.97N operating force. Ideal for panel mounting applications requiring momentary switch action.
V15T22-EC200
V15T22-EC200 by Honeywell is a snap action/limit switch with SPST function, 6000 cycles electrical life, and 22A@250VAC max AC contact current. It features a pin plunger actuator type and quick connect termination, suitable for panel mounting applications requiring momentary switch action.
XCG8Z1
Johnson Electric Group
Snap Acting/Limit Switches;
ZE-Q-2
Omron
Omron ZE-Q-2 is a SPDT snap acting/limit switch with 500000 cycles electrical life. It has IP60 sealing, 15A@250VAC AC max rating, and 3.43N max operating force. Ideal for panel mounting applications in environments with temperatures ranging from -10 to 80°C.
DT-2R-A7
The Honeywell Sensing And Control DT-2R-A7 is a DPDT snap action/limit switch with 10A@250VAC AC max rating. With a body width of 17.45 inch and height of 31.24 mm, it offers momentary switch action and screw termination type for panel mounting applications. Its actuator travel is 2.04mm, making it suitable for various industrial control systems requiring precise switching capabilities.
9007AO32
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
GLAB33A4J
GLAB33A4J by Honeywell is a snap action/limit switch with SPDT function, IP67 sealing, and 42mm body width. It has a max AC contact current of 6A@120VAC and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
9007AO2A
D2F-01
Omron's D2F-01 snap action switch has a 30,000 cycle electrical life and operates b/w -25°C to 65°C. With a SPDT switch function, it features a PIN PLUNGER actuator type with 0.75mm travel. Ideal for applications requiring momentary switch action in environments up to IP40 sealing standard.
SSG-01L2H
Omron's SSG-01L2H is a SPDT snap acting/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator type, it has 0.1A@125VAC AC max rating and 0.1A@30VDC DC max rating. Ideal for panel mounting applications, it offers IP00 sealing and operates b/w -25°C to 125°C temperature range.
18HM1-1
18HM1-1 by Honeywell Sensing And Control is a snap action/limit switch with SPDT function. It features a body width of 6.35 inch, hermetically sealed for corrosion proofing, and can operate in temperatures ranging from -65 to 260 °C. Ideal for panel mounting applications requiring a max AC contact voltage of 115V and DC contact current of 1A.
M8805/55-002
Honeywell Sensing And Control's M8805/55-002 is a DPST snap action/limit switch with 21.79" width, 34.54mm height, and -40 to 85°C operating temperature range. Ideal for panel mounting applications requiring momentary switch action with a max DC contact voltage of 28V.
DG13-B1RA
Hirose Electric
The Hirose Electric DG13-B1RA snap action/limit switch features SPDT switch function, 10000 cycles electrical life, and 3A@125VAC AC max rating. With a roller lever actuator type and through hole-straight mounting feature, it is ideal for applications requiring momentary switch action in industrial machinery and equipment.
MS27240-1
Otto Engineering
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 18.29 mm; Body Height: 25.4 mm;
624EN1-6
The Honeywell Sensing And Control 624EN1-6 is a corrosion-proof snap action/limit switch with 4PDT function, suitable for panel mount-threaded applications. It features a roller type actuator with 4.2mm travel and can handle up to 7A@28VDC current load, providing reliable performance in various industrial settings.
SS-3GL13P
Omron SS-3GL13P is a SPDT snap acting/limit switch with 70000 cycles electrical life. Featuring IP40 sealing, it has a max operating temperature of 85°C and -25°C min. Ideal for panel mounting applications, it offers a max AC contact current of 3A@125VAC and DC contact current of 3A@30VDC.
111SM124-H2
111SM124-H2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a steel lever actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC, suitable for applications requiring momentary switch action. With a body width of 6.35 inch and mounting feature THROUGH HOLE-STRAIGHT, it is ideal for industrial automation systems.
MS24547-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Body Height: 8.89 mm; End Contact Plating: GOLD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V7-1V29E9
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PLASTIC PLUNGER; Maximum AC Contact Current: 21 A; Body Height: 15.88 mm;
V7-1V20E9-000-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PLASTIC PLUNGER; Maximum AC Contact Current: 21 A; Actuator Travel (mm): 2.46;
V7-1V39E9
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PLASTIC PLUNGER; Manufacturer Series: V7-1V39E9; Maximum AC Contact Current: 21 A;
V7-1V20E94
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PLASTIC PLUNGER; Body Width: 10.16 inch; Body Length/Diameter: 28.83 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved