Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Honeywell Sensing And Control's V7-1C17D8 is a SPDT snap action/limit switch with 15.1A@277VAC AC and 0.5A@125VDC DC max ratings. Featuring a plastic plunger actuator, it has a body width of 10.16 inch and is ideal for panel mounting applications requiring momentary switch action.
Median Price
$3.210
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$1.789
100+ parts
$1.688
1k+ parts
$1.626
10k+ parts
-
Chip1Stop
$2.730
$2.087
$2.010
Powell Electronics
$2.870
$2.310
Sager
$2.940
$2.450
$2.390
Newark
$3.480
$2.580
$2.560
Distrelec
$3.811
RS Americas
$3.990
$2.990
$2.590
DigiKey
$4.320
$3.131
$2.769
Element14
$4.760
$3.760
RS (Exports)
$4.950
$3.960
Master Electronics
$1.690
$1.550
$1.530
Verical
$1.988
$1.835
TTI
$1.860
$1.750
Farnell
$6.940
Nova Conductors
$2.582
Electro Sonic
$2.250
$1.790
IBS Electronics
$2.370
$2.174
Vyrian
Q Components
Resion
Allen Electronics Distributors
$1.350
Continental Prestige Electronics
$1.680
$1.580
Ampacity Inc.
Metaverse IC Inc.
Authorized Procurement Solutions
Argo Parts USA
Netroflash
$2.530
$2.453
$2.401
Assy Fe
The wide body design provides sturdy support and durability for the switch.
The SPDT function allows for versatility in switching between different circuits.
The compact body height makes it suitable for installations where space is limited.
High AC contact current rating ensures reliable performance in heavy-duty electrical applications.
The actuator travel distance allows for precise and accurate operation of the switch.
The plastic plunger material provides durability and resistance to wear and tear.
The high DC contact voltage rating ensures compatibility with a wide range of electrical systems.
The snap acting feature provides quick and reliable switching action, ideal for various applications.
High AC contact rating ensures the switch can handle heavy electrical loads without overheating.
Compact body dimensions make it easy to install in tight spaces.
Low operating force required for switching makes it user-friendly and easy to operate.
Suitable for low DC voltage applications, providing flexibility in usage.
Can handle moderate DC currents, making it versatile for different applications.
Momentary switch action allows for temporary activation, suitable for control and signaling applications.
Quick connect terminals enable easy and fast installation without the need for soldering.
High AC contact voltage rating ensures compatibility with a wide range of electrical systems.
Minimal pre-travel distance ensures quick response and accurate switching action.
Panel mount design allows for easy and secure installation on various surfaces.
Snap Action & Limit Switches V7-1C17D8 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
V7-1C17D8 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
PCN Design/Specification - Alternative Resin 29/MAR/2022
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Cheng-yi Electronic
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
MMBF170LT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Synsemi
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
313SX5-T
Honeywell Sensing And Control
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Maximum DC Contact Current: 1 A; Maximum AC Contact Current: 1 A; Body Height: 8.89 mm;
914CE2-3
The Honeywell Sensing And Control 914CE2-3 is a SPDT snap action/limit switch with 16" body width and 43.99mm height. Featuring a steel roller actuator, it has a max AC contact current of 5A@250VAC. Ideal for panel mounting applications requiring momentary switch action with 4.8mm actuator travel and 12.01N max operating force.
EX-AR800
The Honeywell Sensing And Control EX-AR800 is a 51.18" wide, 65.02mm high snap action/limit switch with SPDT function and explosion-proof sealing. It operates b/w -40°C to 71°C, with max AC contact current of 5A@480VAC and DC contact current of 0.5A@125VDC. Ideal for panel mounting applications requiring momentary switch action.
ESE13V01A
Panasonic
The Panasonic ESE13V01A is a SPST snap action/limit switch with 50000 cycles electrical life. Featuring a lever actuator type, it has a max operating force of 0.3N and operates b/w -10°C to 60°C. Ideal for applications requiring momentary switch action, it has a DC contact rating of 0.01A at 5VDC and termination via soldering in surface mount-right angle configuration.
D4BS-25FS
Omron
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4BS;
11SM401-T
11SM401-T by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.63mm actuator travel. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
JS-220
JS-220 by Honeywell Sensing And Control is a 7.14" wide snap action/limit switch with corrosion-proof sealing. Featuring 3.94mm actuator travel and 0.28N max operating force, it's ideal for panel mount applications requiring momentary switch action.
1EN51-6B
1EN51-6B by Honeywell is a corrosion-proof SPDT snap action/limit switch with a steel plunger. It has a max DC contact voltage of 28V and can handle up to 4A@28VDC. Ideal for panel mounting applications, it offers momentary switch action with an actuator travel of 7.37mm and max operating force of 26.69N.
MS24547-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Body Height: 8.89 mm; End Contact Plating: GOLD;
YZ-2R5556T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Maximum AC Contact Voltage: 250 V; Actuator Travel (mm): .13; DC Maximum Rating R Load (Contact): .5A@125VDC;
Z-15GW2A55-B5V
Omron Z-15GW2A55-B5V is a snap action/limit switch with SPDT function. It has an electrical life of 500K cycles, sealing rating of IP62, and can handle up to 15A@250VAC. Ideal for panel mounting applications in environments with temperatures ranging from -15°C to 80°C.
311SM703-T
311SM703-T by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 9.31mm actuator travel. It has a max AC contact current of 4A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with wire termination.
Z-15ESR
Omron Z-15ESR is a SPDT snap action/limit switch with 100000 cycles electrical life. It has a slim spring plunger actuator, IP00 sealing, and can handle 15A@250VAC AC max rating. Ideal for panel mounting applications in environments ranging from -25°C to 80°C.
9007AO1
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
ESE58R11A
The Panasonic ESE58R11A is a SPST snap action/limit switch with 50000 cycles electrical life. It has a body width of 3" and operates b/w -10 to 60°C. With a max DC contact voltage of 5V, it is ideal for applications requiring momentary switch action in surface mount-right angle configurations.
9007TUB4M12
D413-R1LD-G2
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Length (Actuator): .122 inch; Minimum Operating Temperature: -40 Cel; Body Width: 10.3124 inch; Body Height: 15.9004 mm;
D3SH-A1L
Omron's D3SH-A1L is a SPST snap action/limit switch with 100000 cycles electrical life. With a body width of 3", it operates b/w -25 to 85°C temperatures. Ideal for applications requiring momentary switch action, it has a max DC contact voltage of 5V and an actuator travel of 3.8mm.
FF6-11-DC-03
FF6-11-DC-03 by Honeywell is a 19mm snap action/limit switch with DPST function, IP67 sealing, and -10 to 55°C operating temperature range. Ideal for panel mounting applications requiring momentary switch action with wire termination.
D4NL-4AFA-B
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V7-1C17D8-201
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Maximum Operating Force: 1.72 N; Sealing: CORROSION PROOF; DC Maximum Rating R Load (Contact): .5A@125VDC;
V7-1C17D8-263
Honeywell Sensing And Control's V7-1C17D8-263 is a 10.16" wide snap action/limit switch with SPDT function, corrosion-proof sealing, and steel lever actuator. It has a max AC contact current of 15.1A@277VAC and DC contact voltage of 125VDC, making it ideal for panel mounting applications requiring momentary switch action.
V7-1C27E9-263
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): STEEL LEVER; Maximum DC Contact Current: .5 A; Maximum DC Contact Voltage: 125 V;
V7-1C17D8-048
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Maximum DC Contact Voltage: 125 V; Body Height: 15.88 mm; Maximum AC Contact Voltage: 277 V;
V7-1C13D8-201
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Body Height: 15.9 mm; Maximum Pre Travel: 1.19 mm;
V7-1C17E9-207
Honeywell V7-1C17E9-207 snap action switch has SPDT function, 5A@277VAC AC rating, and steel roller lever actuator. Ideal for panel mounting applications requiring corrosion-proof sealing and momentary switch action with quick connect termination.
V7-1C17D844-429
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SPECIAL LEVER; Body Height: 15.9 mm; Maximum Operating Temperature: 82 Cel;
V7-1C17D8-022
V7-1C17D8-022 by Honeywell is a 10.16" wide snap action/limit switch with SPDT function, suitable for panel mounting. It has a max AC contact current of 15A@277VAC and DC contact voltage of 125V, making it ideal for applications requiring corrosion-proof sealing and momentary switch action.
V7-1C17D8-294
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Actuator Travel (mm): 4.8; Maximum AC Contact Voltage: 250 V;
V7-1C28E9
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PLASTIC PLUNGER; Termination Type: QUICK CONNECT; Manufacturer Series: V7-1C28E9;
V7-1C37D855-002
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): STEEL LEVER; DC Maximum Rating R Load (Contact): .5A@125VDC; Maximum Operating Force: 1.57 N;
V7-1C17E9-292
Honeywell Sensing And Control's V7-1C17E9-292 is a 10.16" wide snap action/limit switch with SPDT function, suitable for corrosion-proof sealing applications. It offers 15.1A@277VAC AC max rating and 0.5A@125VDC DC max rating, with a compact body size of 28.83mm length and 15.88mm height, making it ideal for panel mount installations requiring quick connect termination.
V7-1C18D8
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Switch Action: MOMENTARY; Maximum AC Contact Voltage: 277 V;
V7-1C27E9
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PLASTIC PLUNGER; AC Maximum Rating R Load (Contact): 15.1A@250VAC; Body Height: 15.88 mm;
V7-1C17D8-002
Honeywell Sensing And Control's V7-1C17D8-002 is a 10.16" snap action switch with SPDT function, corrosion-proof sealing, and steel lever actuator. It has a max AC contact current of 15.1A@277VAC and DC contact voltage of 0.5A@125VDC. Ideal for panel mounting applications requiring momentary switch action.
V7-1C17E9-201
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL ROLLER LEVER; Body Length/Diameter: 28.83 mm; Maximum DC Contact Voltage: 125 V;
V7-1C18E9
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Manufacturer Series: V7-1C18E9; AC Maximum Rating R Load (Contact): 15.1A@277VAC;
V7-1C17D8-207
Honeywell Sensing And Control's V7-1C17D8-207 is a 10.16" snap action/limit switch with SPDT function, steel roller lever actuator, and 15.1A@277VAC AC rating. Ideal for panel mounting applications requiring momentary switch action and quick connect termination.
V7-1C17E9
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Body Length/Diameter: 28.83 mm; Maximum AC Contact Voltage: 277 V;
V7-1C18E9-022
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Maximum Operating Force: .83 N; Sealing: CORROSION PROOF; Maximum DC Contact Voltage: 125 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved