Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL1-AK by Honeywell is an IP67 sealed SPDT snap action/limit switch with a max operating temperature of 70°C. Featuring a top roller plunger actuator, it has a max AC contact voltage of 125V and is ideal for panel mounting applications requiring momentary switch action.
Median Price
$320.179
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Master Electronics
1+ parts
$291.710
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$297.170
Verical
$343.188
RS (Exports)
$374.180
DigiKey
$2,357.810
$2,219.151
$2,174.768
Sensorwell Vertriebs GesmbH
Powell Electronics
$270.470
Electro Sonic
$130.233
$106.337
Bristol Electronics
$196.700
Kempston Controls
$276.150
TME
$401.730
IBS Electronics
$492.287
Vyrian
Nova Conductors
Lakeland Logistics Inc
AZTECH Wire
$3.160
$3.030
$2.970
$2.910
Ampacity Inc.
$196.010
Allen Electronics Distributors
$240.770
Aranea Global
Assy Fe
Perfect Parts
With an IP67 sealing, this switch is completely protected against dust and can withstand being submerged in water up to 1 meter for 30 minutes, making it ideal for demanding environments.
The SPDT switch function allows for a single pole, double throw operation, providing versatility and flexibility in wiring configurations.
With a maximum operating temperature of 70°C, this switch can withstand high temperatures without compromising its functionality.
The maximum AC contact current of 0.1A ensures safe and reliable operation, suitable for low voltage applications.
With a minimum operating temperature of -10°C, this switch can also perform effectively in cold environments.
The 4.5mm actuator travel allows for precise and accurate operation, ensuring the switch is triggered exactly when needed.
The top roller plunger design of the actuator offers a reliable and durable mechanism for triggering the switch.
The maximum DC contact voltage of 30V allows for safe operation in low voltage DC circuits.
The snap acting/limit switch type provides quick and reliable switching action, making it suitable for applications that require precise control.
The AC maximum rating R load of 0.1A at 125VAC ensures compatibility with standard AC voltage levels.
With a maximum operating force of 11.8N, this switch offers a responsive and reliable actuation force for consistent performance.
The DC maximum rating R load of 0.1A at 30VDC makes this switch suitable for low voltage DC applications.
The maximum DC contact current of 0.1A ensures safe and reliable operation in DC circuits.
The momentary switch action allows for temporary on/off operation, making it ideal for applications where a temporary signal or control is required.
The wire termination type simplifies installation and ensures a secure connection, making it easier to integrate this switch into existing systems.
With a maximum AC contact voltage of 125V, this switch is suitable for a wide range of AC voltage applications.
The maximum pre-travel of 1.5mm ensures precise operation and control, allowing for accurate triggering of the switch.
The panel mounting feature allows for easy and secure installation on a panel or enclosure, making it convenient to integrate this switch into various systems.
Snap Action & Limit Switches SL1-AK attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
SL1-AK Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
SDR0604-101KL
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
SPC TECHNOLOGY/ MULTICOMP
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
RC0805FR-0710RL
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SS-5GL111-F-2D
Omron
SNAP ACTING/LIMIT SWITCH;
83845001
Crouzet
XCMD21F0L1
Schneider Electric Sa
SS-5GL2-F-3T
MS24547-1
Honeywell Sensing And Control
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Body Height: 8.89 mm; End Contact Plating: GOLD;
D2F-L3-A1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Height: 5.8 mm; Maximum AC Contact Current: 3 A;
D2F-01F-D3
Omron's D2F-01F-D3 is a SPDT snap action/limit switch with 30VDC contact voltage and 0.1A current rating. With IP40 sealing, it has a body width of 5.8" and actuator travel of 0.75mm. Ideal for panel mounting applications requiring momentary switch action in temperatures ranging from -25°C to 65°C.
21SX39-T2
21SX39-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 7A@250VAC and DC contact current of 7A@28VDC, suitable for panel mounting applications. With a compact body width of 5.08", it offers precise actuation with an actuator travel of 0.6mm and max operating force of 1.39N.
D2D-3104
The Omron D2D-3104 is a DPST snap acting/limit switch with 4A@380VAC AC max rating, 100000 cycle electrical life, and IP40 sealing. It features a plunger actuator type with 2.3mm travel, suitable for panel mounting applications requiring momentary switch action at temperatures ranging from -25 to 85°C.
Z-15GW2A55-B5V
Omron Z-15GW2A55-B5V is a snap action/limit switch with SPDT function. It has an electrical life of 500K cycles, sealing rating of IP62, and can handle up to 15A@250VAC. Ideal for panel mounting applications in environments with temperatures ranging from -15°C to 80°C.
V7-1C17D844-429
Honeywell Sensing And Control's V7-1C17D844-429 is a SPDT snap action/limit switch with 10.2" width, 15.9mm height, and 3.05mm actuator travel. It operates b/w -40 to 82°C, handles up to 15A@250VAC for AC contact current, and has a max force of 1.27N. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
D2SW-3L2MS
Omron's D2SW-3L2MS snap action switch has an electrical life of 200K cycles, SPDT switch function, and IP67 sealing. With a max operating temperature of 85°C, it is ideal for panel mounting applications requiring a momentary switch with a hinge roller lever actuator.
BZ-RX
BZ-RX by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. It features a plastic plunger actuator, 0.68mm actuator travel, and 2.5N max operating force. Ideal for panel mounting applications requiring precise switching capabilities in industrial settings.
D3SH-B1R
Omron's D3SH-B1R snap action switch has a 100000 cycle electrical life, SPST switch function, and 3.8mm actuator travel. With a max operating force of 0.3N, it is ideal for applications requiring momentary switch action in temperatures ranging from -25°C to 85°C.
13AC1
13AC1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15.1A@250VAC AC max rating, suitable for panel mount applications. Featuring a 9.14mm actuator travel and 17.79N max operating force, it offers reliable performance in various industrial settings.
DB1CA1RB
The Cherry
The Cherry's DB1CA1RB is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has a 6.45" body width, 9.65mm body height, and IP50 sealing for protection. Ideal for applications requiring a max AC contact current of 5A@250VAC and operating temperatures ranging from -40 to 120 °C.
Z-15ER
Omron Z-15ER is a SPDT snap action/limit switch with 100000 cycles electrical life. It has a PIN PLUNGER actuator, IP00 sealing, and can handle 15A@250VAC AC max rating R load. Ideal for panel mounting applications in environments ranging from -25°C to 80°C.
ASQ10230
Panasonic
The Panasonic ASQ10230 is a SNAP ACTING/LIMIT SWITCH with SPST function. It offers an Electrical Life of 200,000 cycles and IP67 sealing for durability. With a max operating temperature of 85°C, it is ideal for PANEL MOUNT applications requiring reliable switching performance.
JS-220
JS-220 by Honeywell Sensing And Control is a 7.14" wide snap action/limit switch with corrosion-proof sealing. Featuring 3.94mm actuator travel and 0.28N max operating force, it's ideal for panel mount applications requiring momentary switch action.
1HS3
1HS3 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a body width of 17.45 inch and corrosion-proof sealing, suitable for panel mounting applications. With a max operating temperature of 121°C and AC contact current of 0.5A, it offers reliable performance in various industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL1-A
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Actuator Travel (mm): 4.5; Maximum AC Contact Current: 5 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved