Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Honeywell Sensing And Control's HSCMRNN100PGAA5 is a pressure sensor with 0.25% accuracy, 100 Psi max range, and 5.25 V supply voltage. Ideal for gage pressure sensing applications in various industries due to its compact size (13.3mm x 5.8mm) and fast response time of 1000 us.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Ampacity Inc.
$15.750
AZTECH Wire
$16.891
Bastille Electronics
Allows for a wide range of power supply options and compatibility with various systems.
Provides a secure and leak-proof connection for reliable pressure sensing applications.
Compact size allows for installation in tight spaces while maintaining high performance.
Delivers precise and reliable pressure readings for critical applications.
Utilizes advanced technology for accurate pressure measurement in various environments.
Low-profile design minimizes space requirements and allows for versatile mounting options.
Sleek and compact design for easy integration into different systems and applications.
Operates efficiently with low power consumption for energy-saving applications.
Can withstand high-temperature conditions without affecting performance.
Provides continuous and real-time data for monitoring and control purposes.
Offers quick and accurate response to changes in pressure levels for dynamic systems.
Ensures reliable operation in low-temperature environments without any performance issues.
Efficient current consumption for prolonged usage and increased reliability.
Suitable for applications requiring high-pressure monitoring and control.
Capable of accurately detecting even the smallest pressure changes for precise measurements.
Measures pressure relative to atmospheric pressure, providing accurate readings in various conditions.
Optimal size for easy installation and compatibility with different systems.
Secure connection for reliable data transmission and minimal signal loss.
Convenient mounting option for quick and easy installation on flat surfaces.
Pressure Sensors HSCMRNN100PGAA5 attributes and parameters. Explore more Pressure Sensors devices from Honeywell Sensing And Control
Maximum Accuracy (%):
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Type:
Package Shape or Style:
Port Type:
Maximum Pressure Range:
Minimum Pressure Range:
Pressure Sensing Mode:
Response Time:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Telefunken
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Boca Semiconductor
Infinex
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Surge Components
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
MPXH6250A6U
Motorola
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.20-4.90V; Maximum Operating Temperature: 125 Cel;
142PC15D
Honeywell Sensing And Control
142PC15D by Honeywell is a pressure sensor with a max supply voltage of 16V and barbless port type. Ideal for applications requiring differential pressure sensing, it offers an output range of 5.9-6.1V and operates b/w -40 to 85°C. With a response time of 1000us, this rectangular sensor is suitable for board mounting with pin termination.
MPXV7007GP
Freescale Semiconductor
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 4.3-4.70V; Termination Type: SOLDER;
MP3V5050DP
The NXP Semiconductors MP3V5050DP is a pressure sensor with 2.5% accuracy, operating from -40 to 125°C. It has a pressure range of 0-7.25 Psi and outputs analog voltage from 0.06-2.82V, making it ideal for applications requiring precise pressure measurements in various environments.
86-100G-R
TE Connectivity
TE Connectivity's 86-100G-R is a piezoresistive pressure sensor with linearity of 0.1%. It offers voltage output with an output range of 100mV and operates b/w -40 to 125°C. Ideal for applications requiring precise pressure measurement in a compact form factor.
ABPDANN005PG2A3
Honeywell
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.66-2.64V; Termination Type: SOLDER;
BPS130-HG015P-3S
Bourns
Bourns BPS130-HG015P-3S is a 12-bit pressure sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 0.5-4.5V analog output. Ideal for gauge pressure sensing applications, it features straight port type and through-hole mounting for easy integration in various industrial systems.
2SMPB-02E
Omron
PRESSURE SENSOR,PIEZORESISTIVE;
NPP-301A-200AT
Abb
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 40-80mV; Maximum Operating Temperature: 125 Cel;
MPX5999D
The NXP Semiconductors MPX5999D is a piezoresistive pressure sensor with 2.5% accuracy, operating b/w -40 to 125°C. It has a max pressure range of 150 Psi and outputs analog voltage from 0.20-4.70V, making it ideal for applications requiring precise pressure measurements in various industries.
MPXV5004GC6U
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 1-4.90V; Maximum Accuracy (%): 6.25;
HSCDANN015PA2A3
Honeywell Sensing And Control's HSCDANN015PA2A3 is a 12-bit pressure sensor with 0.25% accuracy, operating at -20 to 85°C. It features a digital voltage output range of 0.66-2.64V and uses I2C interface for communication. Ideal for applications requiring precise pressure sensing in a compact form factor with through hole mounting option.
SSCDANN010BGAA3
SSCDANN010BGAA3 by Honeywell is a piezoresistive pressure sensor with 0.25% accuracy, operating at -40 to 85°C. It has a max pressure range of 145.03 Psi and uses I2C interface for analog voltage output. Ideal for applications requiring precise pressure measurement in various industries.
MPX2100AP
The NXP Semiconductors MPX2100AP is a piezoresistive pressure sensor with 10-16V supply voltage range, ABSOLUTE sensing mode, and 1.4504 Psi max pressure range. It outputs analog voltage in the range of 38.5-41.5mV, making it ideal for applications requiring precise pressure measurements like industrial automation and automotive systems.
XCX100DNH
The Honeywell Sensing And Control XCX100DNH is a piezoresistive pressure sensor with 0.5% max accuracy and 0-100mV analog voltage output range. Ideal for applications requiring differential pressure sensing, it operates within a 3-16 V supply voltage range. The sensor features a barbed port type and through-hole mounting, making it suitable for various industrial uses.
SM9D-BBK-T-006S-000
TE Connectivity's SM9D-BBK-T-006S-000 is a piezoresistive pressure sensor with 0.1% accuracy, 6.5V max supply voltage, and 90mV output range. Ideal for applications requiring precise pressure measurements in environments ranging from -40°C to 85°C.
MP3V5050GP
The NXP Semiconductors MP3V5050GP is a pressure sensor with 2.5% accuracy, operating at -40 to 125°C. It has an output range of 0.06-2.82V and sensitivity of 54 mV/V, making it ideal for gage pressure sensing applications in various industries. With a compact square package design and barbed port type, it offers precise measurements in a wide pressure range from 0 to 7.25 Psi.
HSCMNNN015PA2A3
Honeywell Sensing And Control's HSCMNNN015PA2A3 is a 12-bit pressure sensor with 0.25% accuracy, operating at -20 to 85°C. It features a digital voltage output range of 0.66-2.64V and uses I2C interface for communication. Ideal for applications requiring precise pressure sensing in a compact rectangular package.
MPXV4115VC6U
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 4.53-4.66V; Body Width: 10.66 inch;
MPXV2102GP
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Body Width: 12.06 inch; Minimum Supply Voltage: 10 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSCMRNN1.6BASA3
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.66-2.64V; Maximum Supply Voltage: 3.6 V;
HSCMAND060PA3A3
Honeywell Sensing And Control's HSCMAND060PA3A3 is a 12-bit pressure sensor with 0.25% accuracy, operating at 3-3.6V. Ideal for applications requiring precise pressure sensing in a compact rectangular package, featuring I2C interface and ABSOLUTE mode for 0-60 Psi range.
HSCMANN100PGAA3
Honeywell Sensing And Control's HSCMANN100PGAA3 is a pressure sensor with 0.25% accuracy, 100 Psi max range, and 3.6 V supply voltage. Ideal for gage pressure sensing applications in various industries due to its compact size, barbed port type, and quick response time of 1000 us.
HSCMANV001BAAA5
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG OUTPUT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 85 Cel; Additional Features: Port Diameter = 4.93 MM and Port Height = 7.95 MM;
HSCMNNN100PGAA3
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG OUTPUT; Package Shape or Style: RECTANGULAR; Port Type: HOLE; Minimum Operating Temperature: -20 Cel;
HSCMRRN005PDSA5
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 1-4V; Maximum Accuracy (%): 0.25;
HSCMNNN100PGAA5
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG OUTPUT; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 4.75 V; Port Type: HOLE;
HSCMANV001BA2A3
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.66-2.64V; Pressure Sensing Mode: ABSOLUTE;
HSCMNNN015PAAA3
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG OUTPUT; Package Shape or Style: RECTANGULAR; Maximum Pressure Range: 15 Psi; Termination Type: SOLDER;
HSCMNNN015PAAA5
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG OUTPUT; Package Shape or Style: RECTANGULAR; Minimum Pressure Range: 0 Psi; Maximum Operating Temperature: 85 Cel;
HSCMNNN015PASA5
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 1-4V; Maximum Operating Current: 4.6 mA;
HSCMRRN001PD2A3
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.66-2.64V; Maximum Operating Temperature: 85 Cel;
HSCMRNT1.6BASA3
HSCMNNN1.6BAAA3
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG OUTPUT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Minimum Operating Temperature: -20 Cel;
HSCMAND015PASA5
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 1-4V; Termination Type: SOLDER;
HSCMRNN015PAAA5
Honeywell Sensing And Control's HSCMRNN015PAAA5 is a pressure sensor with 0.25% accuracy, 15 Psi max range, and 1000 us response time. Ideal for applications requiring precise pressure measurement in a compact design, such as automotive systems or industrial machinery.
HSCMRRD005NDAA5
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG OUTPUT; Package Shape or Style: RECTANGULAR; Body Height: 6.16 mm; Additional Features: Port Diameter = 1.93 MM;
HSCMAND150PA4A3
Honeywell Sensing And Control's HSCMAND150PA4A3 is a 12-bit pressure sensor with 0.25% accuracy, operating at -20 to 85°C. It features a max pressure range of 150 Psi and uses ABSOLUTE sensing mode. Ideal for applications requiring digital voltage output and I2C interface in a compact rectangular package.
HSCMRRN005PD2A3
PRESSURE SENSOR,PIEZORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.66-2.64V; Body Width: 10 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved