Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HMC1022-TR by Honeywell Sensing And Control is a magnetic field sensor with 2 axes, operating temperature range of -40 to 125°C, and max supply voltage of 12V. It is a surface mount sensor suitable for applications requiring precise magnetic field measurements in the range of -0.6mT to 0.6mT.
Median Price
$4.945
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
$4.237
1k+ parts
$4.197
10k+ parts
Arrow
$2.966
Verical
$5.653
DigiKey
$22.454
$21.134
Digiode
Nova Conductors
Vyrian
Corohmni
$2.066
Ampacity Inc.
$2.520
Component Stockers USA
$3.000
$2.570
Aztec Data Supply Inc.
$3.289
Advanced Electronics
$3.559
$3.239
$2.918
Continental Prestige Electronics
$3.750
Corphita
$4.014
Perfect Parts
Argo Parts USA
Bastille Electronics
The use of plastic/epoxy material ensures durability and resilience in various environments, making this product suitable for different applications.
With a high maximum supply voltage of 12V, this magnetic field sensor can handle a wide range of power inputs, providing flexibility and compatibility with different systems.
The compact body width of 3.988 inches allows for easy integration and installation in tight spaces, making it ideal for applications where space is limited.
The combination of magnetic field sensor and magnetoresistive technology offers precise and reliable sensing capabilities, ensuring accurate detection of magnetic fields.
With 16 terminals, this sensor allows for versatile connectivity options and enables complex configurations, making it suitable for advanced systems and applications.
Having two axes enhances the sensor's ability to detect magnetic fields in multiple directions, providing comprehensive sensing coverage for a wide range of applications.
The low body height of 1.5495 mm facilitates sleek and compact design integration, making this sensor suitable for applications where space constraints are a concern.
The rectangular package shape offers ease of mounting and alignment, simplifying installation and ensuring precise placement for optimal sensing performance.
The low minimum supply voltage requirement of 2V enables energy-efficient operation and compatibility with a wide range of power sources, enhancing versatility.
With a maximum operating temperature of 125°C, this sensor can withstand high-temperature environments, ensuring reliable performance in challenging conditions.
The wide operating temperature range of -40°C to 125°C allows the sensor to function effectively in both extreme cold and hot environments, increasing its utility.
The matte tin terminal finish enhances solderability and provides a durable and reliable connection, ensuring long-term performance and stability.
The ability to detect a minimum magnetic field range of -0.6 mT ensures sensitivity to subtle changes in magnetic fields, enabling precise and accurate measurements.
With a maximum magnetic field range of 0.6 mT, this sensor can detect a wide spectrum of magnetic fields, making it suitable for various applications requiring different field strengths.
The compact body length/diameter of 10.541 mm contributes to the sensor's overall small footprint, allowing for easy integration and placement in diverse applications.
The use of solder termination ensures secure and reliable connections, minimizing the risk of signal interruptions or malfunctions, enhancing the sensor's overall performance.
The surface mounting feature simplifies installation and enables secure attachment to PCBs or other surfaces, facilitating quick and easy integration into electronic systems.
Magnetic Field Sensors HMC1022-TR attributes and parameters. Explore more Magnetic Field Sensors devices from Honeywell Sensing And Control
Body Width:
Body Height:
Body Length/Diameter:
JESD-609 Code:
Maximum Magnetic Field Range:
Minimum Range Of Magnetic Field:
Mounting Feature:
No. of Axes:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20Z
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS496B-SP
Honeywell Sensing And Control
SS496B-SP by Honeywell Sensing And Control is a 3-inch magnetic field sensor with 10.5V max supply voltage, -40 to 150°C operating temp range, and 2.5 mV/G sensitivity. Ideal for applications requiring precise analog current output in a compact rectangular package.
SS441A-L
MAGNETIC FIELD SENSOR,HALL EFFECT;
A1106LLHLT-T
Allegro MicroSystems' A1106LLHLT-T is a Hall effect magnetic field sensor with 3 terminals, voltage output, and hysteresis of 10.5 mT. It operates b/w -40 to 150°C, suitable for automotive applications requiring precise magnetic field detection in the range of 16-43 mT.
SS94A1B
Micro Switch
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 1mA; Body Height: 15.2 mm;
CLN-100
Sypris Test & Measurement
CLN-100 by Sypris Test & Measurement is a Hall effect magnetic field sensor with 0.1% linearity, operating b/w -40°C to 85°C. It has an output type of analog current up to 50A, suitable for applications requiring precise magnetic field measurements in industrial environments. With dimensions of 14.45" x 36.6mm x 29.6mm and a plastic housing, it offers reliable performance with a supply voltage range of 12V to 15V.
SS46
SS46 by Honeywell is a magnetic field sensor with a max supply voltage of 24V and output range of 0.40V. It operates in temperatures from -55 to 150°C, with a magnetic field range of ±37.5mT. Ideal for applications requiring precise analog voltage output in compact spaces.
AA002-02E
Nve
Nve's AA002-02E is a MAGNETIC FIELD SENSOR with 24V max supply, -50 to 125°C operating temp range, and 0.15-1.05 mT magnetic field range. Ideal for applications requiring ANALOG VOLTAGE output, such as surface mount installations in compact spaces.
2SS52M-T3
2SS52M-T3 by Honeywell is a magnetic field sensor with a plastic body, measuring 1.6" in width and 4.5mm in height. It operates b/w -40 to 150°C, with an output range of 20mA and max current of 11mA. Ideal for applications requiring precise analog current output based on magnetic field strength.
SS49E-L
SS49E-L by Honeywell is a magnetic field sensor with 6.5V max supply voltage, -40 to 100°C operating temp range, and 1-1.75V analog current output. Ideal for applications requiring precise sensing of magnetic fields in a compact rectangular package.
APS11060LUAA-0SL
Magnetic Field Sensors;
LF21235TMR
Littelfuse
LF21235TMR by Littelfuse is a MAGNETIC FIELD SENSOR with 5.5V max supply, 0.7mT hysteresis, and 0.20-2.70V digital output range. Ideal for applications requiring OMNIPOLAR input mode, such as automotive sensors or industrial automation systems due to its compact rectangular shape and surface mounting feature.
TLE49215UXA
Infineon Technologies
TLE49215UXA by Infineon is a magnetic field sensor with 24V max supply, 1.5mT hysteresis, and -5mV/G sensitivity. Ideal for applications requiring precise digital voltage output in a compact rectangular package with through-hole mounting.
S-5716ACDL1-I4T1U
Seiko Instruments Usa
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.40-4.60V; JESD-609 Code: e3;
TLE49655MXTSA1
TLE49655MXTSA1 by Infineon is a magnetic field sensor with 3-5.5V supply voltage, 2.5mT hysteresis, and 0-5mA current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small rectangular shape (1.3" x 2.9mm) and surface mount feature.
DRV5056A1QLPG
Texas Instruments' DRV5056A1QLPG is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and 19mT min magnetic field range. It outputs analog voltage from 0.535-3.1V with a max current of 1A, making it ideal for Hall effect sensing applications in various industries.
TLE49681KXTSA1
TLE49681KXTSA1 by Infineon is a magnetic field sensor with 32V max supply voltage, 2mT hysteresis, and 0-25mA output range. Ideal for applications requiring current output sensing in environments ranging from -40 to 155°C.
TLV49611TAXBXA1
TLV49611TAXBXA1 by Infineon is a magnetic field sensor with 3-26V supply voltage range, 4mT hysteresis, and 0-25mA current output. Ideal for applications requiring -40 to 125°C operating temperature, such as automotive systems and industrial automation due to its Hall effect technology and compact rectangular package design.
SL353HT
SL353HT by Honeywell is a magnetic field sensor with 5.5V max supply voltage, 1.5mT hysteresis, and -40 to 85°C operating temperature range. Ideal for applications requiring precise voltage output in detecting magnetic fields ranging from 0.5mT to 11mT.
TLE4961-3M
TLE4961-3M by Infineon is a magnetic field sensor with 3-32V supply, 15mT hysteresis, and 0-25mA output. Ideal for Hall effect sensing in applications requiring -10.4 to +10.4 mT magnetic field range detection. Features surface mounting and solder termination in a compact rectangular plastic housing.
CT8132DM-IS3
Crocus Technology
CT8132DM-IS3 by Crocus Tech: Magnetic field sensor with 1.7-5.5V supply, 0.5mT hysteresis, -40 to 85°C temp range. Ideal for applications requiring digital voltage output in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC1053
Honeywell
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Minimum Range Of Magnetic Field: -.6 mT; Sensitivity (mV/G): 1 mV/G;
HMC1001-RC
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Body Height: 3.899 mm;
Honeywell Sensing And Control's HMC1001-RC is a magnetic field sensor with 8 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 2-12V and can detect magnetic fields from -0.2 to 0.2 mT. Ideal for applications requiring precise magnetoresistive sensing in a compact rectangular package.
HMC1043T/R
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Linearity (%): 1.80; Body Width: 3 inch;
HMC1021S-TR
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; No. of Axes: 1; Maximum Magnetic Field Range: .6 mT;
Honeywell Sensing And Control's HMC1021S-TR is a magnetic field sensor with 8 terminals, operating b/w -40 to 125°C. It has a magnetic field range of ±0.6 mT and operates on a supply voltage range of 2-12V. Ideal for surface mount applications requiring precise magnetoresistive sensing in plastic/epoxy packages.
HMC1022-TR
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Shape or Style: RECTANGULAR; Maximum Magnetic Field Range: .6 mT; Maximum Supply Voltage: 12 V;
HMC1052L-TR
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Minimum Supply Voltage: 1.8 V; Termination Type: SOLDER; Maximum Operating Current: 10 mA;
HMC1021S
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Maximum Magnetic Field Range: .6 mT; Package Equivalence Code: SOP8,.25;
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.899 inch; Body Length/Diameter: 4.8895 mm;
HMC1052L
HMC1052L by Honeywell is a magnetic field sensor with a max supply voltage of 20V. It has a sensitivity of 1mV/G and can operate in temperatures ranging from -40°C to 125°C. This sensor is commonly used for measuring magnetic fields in various applications.
HMC1041ZTR
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 2 V; Housing: PLASTIC;
HMC1002-TR
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 2 V; Maximum Magnetic Field Range: .2 mT;
Honeywell Sensing And Control's HMC1002-TR is a magnetic field sensor with 2 axes, operating b/w -40 to 85°C. It has a supply voltage range of 2-12V and can detect magnetic fields from -0.2mT to 0.2mT. Ideal for surface mount applications in various industries requiring precise magnetic field measurements.
HMC1021Z-RC
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; JESD-609 Code: e3; Termination Type: SOLDER;
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; JESD-609 Code: e3;
HMC1002-RC
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Shape or Style: RECTANGULAR; Body Width: 7.3405 inch; Package Equivalence Code: SOP20,.4;
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Shape or Style: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel;
HMC1041Z
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 4.1 mm; Resistance: 1300 ohm;
HMC1022-RC-TR
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 12 V; Terminal Finish: Matte Tin (Sn);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved