Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DT-2RV-A7 by Honeywell is a Snap Action & Limit Switch with PHENOLIC housing and SILVER terminal material. It features DPDT switch function, 10A@250VAC AC Max Rating R Load, and SNAP ACTION contact timing. Ideal for panel mounting applications requiring a max operating force of 1.67N and an actuator travel of 29.76mm.
Median Price
$354.710
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Relay Specialties
1+ parts
$160.480
100+ parts
$133.730
1k+ parts
-
10k+ parts
TTI
$313.500
$272.740
Newark
$326.320
$300.210
$293.690
Master Electronics
$331.880
Mouser Electronics
$337.510
Sager
$346.900
Standard Electric Supply Co.
$362.520
RS Americas
$375.320
Verical
$449.987
RS (Exports)
$491.150
Powell Electronics
$999.550
$899.590
$404.830
DigiKey
$2,164.150
$2,036.881
$1,996.143
Component Electronics Inc.
$115.380
$86.540
$75.000
Electro Enterprises
$255.556
$171.642
$164.286
IBS Electronics
$435.507
Vyrian
Nova Conductors
Jaybe Electronics
Q Components
Resion
Ampacity Inc.
$136.410
Allen Electronics Distributors
$342.200
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Phenolic material provides good insulation and durability, making the switch resistant to high temperatures and electrical interference.
Silver terminals ensure low contact resistance, high conductivity, and long-term reliability of the switch.
The compact body width allows for easy installation in tight spaces and ensures efficient use of available space.
Epoxy sealing protects the terminals from moisture and contaminants, enhancing the longevity and performance of the switch.
Double Pole Double Throw function allows the switch to control two separate circuits, making it versatile and suitable for various applications.
Silver plating on end contacts ensures reliable and low-resistance connections, reducing the risk of signal loss or voltage drops.
The compact body height allows for easy integration into different systems or equipment without taking up too much space.
The high operating temperature range makes the switch suitable for use in challenging environments without compromising performance.
The high AC contact current rating allows the switch to handle heavy electrical loads safely and reliably.
The low minimum operating temperature ensures the switch can function effectively even in extremely cold conditions.
The actuator travel distance of 29.76mm provides a good balance between sensitivity and reliability in switching applications.
The straight lever actuator design offers precise and consistent operation, making it suitable for various industrial applications.
The high DC contact voltage rating ensures the switch can safely control DC circuits without the risk of voltage breakdown.
The snap-acting feature provides quick response and reliable operation, while the limit switch function offers precise control over the circuit.
The high AC rating for resistive loads ensures the switch can handle high-power applications without overheating or degrading.
Silver plating on center contacts ensures uniform current distribution and reliable performance in a wide range of electrical circuits.
The compact body length/diameter allows for easy integration into different systems or equipment, enhancing versatility and ease of installation.
Snap-action contact timing ensures quick and reliable switching, reducing the risk of arcing or contact wear in high-speed applications.
The low operating force requirement makes the switch easy to actuate, reducing operator fatigue and ensuring consistent performance.
The DC rating for resistive loads ensures the switch can safely control DC circuits with low power consumption and reliable performance.
The defined operating position of 0.86 inches ensures accurate and repeatable switching, making it suitable for precision control applications.
The actuator length of 2.5 inches offers a good balance between leverage and sensitivity, allowing for precise control and reliable operation.
The maximum DC contact current of 0.3A allows the switch to safely control low-power DC circuits without overheating or performance degradation.
The momentary switch action provides temporary or instantaneous contact closure, making it suitable for applications requiring short-duration activation.
Screw terminals allow for secure and reliable connections, reducing the risk of loose connections or intermittent faults in the electrical circuit.
The high AC contact voltage rating ensures the switch can safely control high-voltage AC circuits without the risk of insulation breakdown.
The maximum pre-travel distance of 28.2mm ensures a short and consistent actuation force, improving the responsiveness and reliability of the switch.
The panel mount design allows for easy and secure installation on panels or enclosures, ensuring stability and reliability in various applications.
Snap Action & Limit Switches DT-2RV-A7 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Length (Actuator):
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
Center Contact Plating:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Timing:
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
End Contact Plating:
Housing Material:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Operating Position:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Terminal Material:
Termination Type:
DT-2RV-A7 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
BSS138PS,115
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LSYAC4LX-FP
Honeywell Sensing And Control
LSYAC4LX-FP by Honeywell is a DPDT snap action/limit switch with IP65-67 sealing. It has a max operating temp of 121°C, AC contact current of 10A, and DC contact voltage of 240V. Ideal for panel mounting applications requiring momentary switch action in environments with temperature range from -12°C to 121°C.
D3V-165-1C5-K
Omron
Omron's D3V-165-1C5-K is a SPDT snap acting/limit switch with 100000 cycles electrical life. Featuring short hinge roller lever actuator, it has 2.35N max operating force and IP00 sealing. Ideal for panel mount applications, it operates b/w -25°C to 105°C with 16A@250VAC AC rating.
V7-1C17D8-022
V7-1C17D8-022 by Honeywell is a 10.16" wide snap action/limit switch with SPDT function, suitable for panel mounting. It has a max AC contact current of 15A@277VAC and DC contact voltage of 125V, making it ideal for applications requiring corrosion-proof sealing and momentary switch action.
20008
Leach International
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): ROLLER PLUNGER; AC Maximum Rating R Load (Contact): 5A@115VAC; Maximum DC Contact Current: 5 A;
ZCD39
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
SS-01GL111
BZE6-2RN81
BZE6-2RN81 by Honeywell is a snap action/limit switch with SPDT function. It has a 25.4mm body width, IP54 sealing, and 7.54mm actuator travel. Ideal for panel mounting applications, it offers a max AC contact current of 15A@480VAC and DC contact current of 0.5A@125VDC.
GLDA03A1B
GLDA03A1B by Honeywell Sensing And Control is a 30.5mm SNAP ACTING/LIMIT SWITCH with SPDT switch function, IP66 sealing, and SILVER end contact material. It has a max operating temperature of 85°C and can handle up to 10A@600VAC AC max rating R load. Ideal for PANEL MOUNT applications requiring reliable switching in harsh environments.
602EN1-6
The Honeywell Sensing And Control 602EN1-6 is a corrosion-proof DPDT snap action/limit switch with a plunger actuator. It has a max DC contact voltage of 28V and can handle up to 7A@28VDC. Ideal for panel mounting applications requiring momentary switch action.
4SX3-T
4SX3-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with 10A@250VAC AC max rating. Featuring a plastic plunger actuator, it has a 0.6mm actuator travel and 1.39N max operating force. Ideal for panel mount-threaded applications requiring momentary switch action.
BZ-2RL-P4
BZ-2RL-P4 by Honeywell Sensing And Control is a snap action/limit switch with SPDT function. It has a max AC contact current of 15A@480VAC and DC contact current of 0.5A@125VDC. Ideal for panel mounting applications, this corrosion-proof switch features a steel leaf type actuator with 1.57mm travel distance.
608.8103.001
Altech
LSA2B-2C
LSA2B-2C by Honeywell is a DPDT snap action/limit switch with EPOXY terminal sealing (IP65, IP66, IP67). It has a max operating temp of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications requiring side rotary actuation in environments with temperature range from -12°C to 121°C.
GLCB01A1A
The Honeywell Sensing And Control GLCB01A1A is a SPDT snap acting/limit switch with IP67 sealing. It has a max operating temperature of 85°C and can handle up to 10A@300VAC AC current. With SIDE ROTARY actuator type, it's suitable for applications requiring momentary switch action in harsh environments.
BZ-RW80X
BZ-RW80X by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC rating and 0.5A@125VDC DC rating. Featuring a 17.45" body width, 26.42mm height, and 5.56mm actuator travel, it's ideal for panel mounting applications requiring precise latched switch action.
LSM6D-1D
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: HDLS; DC Maximum Rating R Load (Contact): A@VDC; AC Maximum Rating R Load (Contact): A@VAC;
SS-01GL13PT
Omron SS-01GL13PT is a SPDT snap action/limit switch with 200000 cycles electrical life. It features simulated roller lever actuator, IP40 sealing, and 0.1A@125VAC AC max rating. Ideal for panel mounting applications, it operates b/w -25°C to 85°C temperature range with 0.5N max operating force.
914CE18-3A
The Honeywell Sensing And Control 914CE18-3A is a SPDT snap action/limit switch with a steel plunger actuator. It has a max AC contact current of 5A@250VAC and an actuator travel of 4.8mm, suitable for panel mount applications requiring momentary switch action.
YA-2RQ1243-D6
YA-2RQ1243-D6 by Honeywell Sensing And Control is a SPST snap acting/limit switch with 20A@480VAC AC max rating. Featuring a hardened steel plunger, it has a body width of 17.45 inch and operates at a max temperature of 121°C. Ideal for panel mount-threaded applications requiring momentary switch action.
D4SL-N4HFG-D
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT-2R-A7
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Maximum AC Contact Current: 10 A; Termination Type: SCREW; DC Maximum Rating R Load (Contact): .3A@125VDC;
DT-2RV22-A7
DT-2RV22-A7 by Honeywell is a DPDT snap action/limit switch with 10A@250VAC AC rating and 0.3A@125VDC DC rating. Featuring a wide sintered stainless steel roller actuator, it has a max operating force of 3.89N and 1.56mm pre-travel. Ideal for panel mounting applications requiring precise momentary switch action.
DT-2RV3-A7
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): PLUNGER; Body Length/Diameter: 49.28 mm; Maximum DC Contact Current: .3 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved