Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BZ-2RW82725551-D6 by Honeywell is a SPDT snap action/limit switch with 1A@125VAC rating. Featuring wide sintered stainless steel roller actuator, it has 3.96mm pre-travel and 0.97N max operating force. Ideal for panel mounting applications requiring splash-proof sealing in industrial settings.
Median Price
$29.200
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
$23.870
1k+ parts
$20.960
10k+ parts
-
Verical
Vyrian
VNN
Nova Conductors
Q Components
AZTECH Wire
$10.670
Ampacity Inc.
$24.820
Aranea Global
Assy Fe
Perfect Parts
The wide body width provides stability and durability to the switch, making it suitable for various industrial applications.
The splash-proof sealing ensures the switch's longevity and reliability in potentially wet or damp environments.
The SPDT switch function allows for versatility in controlling different circuits with one switch, making it efficient and convenient.
The compact body height allows for easy installation in tight spaces without compromising on performance.
With a maximum AC contact current of 1A, this switch can handle moderate electrical loads effectively.
The actuator's 3.96mm travel distance ensures precise and responsive operation of the switch.
The wide sintered stainless steel roller actuator provides durability and smooth actuation for long-term performance.
The snap acting/limit switch type offers quick and reliable switching action, suitable for various applications where precise control is required.
The maximum AC rating of 1A at 125VAC ensures the switch can handle standard electrical loads safely and efficiently.
The compact body length/diameter allows for versatile mounting options and easy integration into different systems.
The maximum operating force of 0.97N provides a balance between actuation force and sensitivity for optimal performance.
The momentary switch action allows for temporary activation, ideal for applications where precise control timing is essential.
The quick connect termination type enables easy and rapid installation of the switch, saving time and effort.
With a maximum AC contact voltage of 125V, this switch can safely and reliably control standard voltage circuits.
The maximum pre-travel of 3.96mm ensures smooth and consistent actuation of the switch for precise control.
The panel mount feature allows for secure and stable installation of the switch on various surfaces, providing flexibility in application.
Snap Action & Limit Switches BZ-2RW82725551-D6 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
BZ-2RW82725551-D6 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Excel (Suzhou) Semiconductor
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Synsemi
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LSYAC1A
Honeywell Sensing And Control
LSYAC1A by Honeywell is a SPDT snap action/limit switch with EPOXY TERMINAL SEALING (IP65, IP66, IP67). It has a max operating temp of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications requiring momentary switch action in environments ranging from -12°C to 121°C.
AV444461
Panasonic
AV444461 by Panasonic is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring a simulated roller lever actuator, it has a max operating force of 0.29N and operates at temperatures ranging from -25°C to 80°C. Ideal for applications requiring momentary switch action and through-hole-straight mounting.
412SX22-T
The Honeywell Sensing And Control 412SX22-T is a SPDT snap action/limit switch with 1A@125VAC AC and 1A@28VDC DC max ratings. Featuring a plastic plunger actuator, it has a 0.6mm actuator travel and 1.39N max operating force. Ideal for panel mounting applications requiring momentary switch action.
LSYPB1A
LSYPB1A by Honeywell Sensing And Control is a snap action & limit switch with a side rotary actuator. It has a max operating temperature of 121°C and can handle up to 10A of AC contact current. With its IP65, IP66, and IP67 sealing, it is suitable for panel mounting applications requiring reliable momentary switch action.
D2F-01L-D
Omron
Omron's D2F-01L-D snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a body width of 5.8 inch and height of 6.5 mm, it is ideal for panel mounting applications requiring momentary switch action at temperatures ranging from -25 to 65 °C.
D2F-L2-A
Omron's D2F-L2-A snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a max AC contact current of 3A@125VAC, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 65 °C.
OP-AR141
The Honeywell Sensing And Control OP-AR141 is a SPDT snap action/limit switch with 15A@480VAC AC contact rating. Featuring SIDE ROTARY actuator type, it has a max operating force of 5.56 N and 5.56 mm pre-travel. Ideal for panel mounting applications requiring momentary switch action.
LSXA3K
LSXA3K by Honeywell is a snap action/limit switch with SPDT function. Made of aluminum alloy, it has silver-plated contacts and operates b/w -12°C to 121°C. With a max AC contact voltage of 600V and DC contact current of 10A, it's ideal for panel mounting applications requiring momentary switch action.
109HM1
109HM1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and hermetically sealed for corrosion protection. It operates b/w -184°C to 121°C, has a max DC contact voltage of 28V, and is ideal for panel mounting applications requiring momentary switch action.
ADPDC2J04AC
Itt Cannon
ITT Cannon's ADPDC2J04AC is a DPDT snap action/limit switch with 200000 cycles electrical life. With a max AC contact current of 15A@250VAC, it has a body width of 16.3 inch and body height of 28.4 mm. Ideal for panel mounting applications requiring momentary switch action and quick connect termination type.
DB1CA1LB
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT STRAIGHT LEVER; Termination Type: SOLDER; Maximum Operating Force: .6 N;
16HM1-1
16HM1-1 by Honeywell Sensing And Control is a hermetically sealed SPDT snap acting/limit switch with a body width of 6.35 inch and max operating temperature of 260°C. It has a max AC contact current of 1A and is ideal for panel mounting applications requiring momentary switch action.
BZ-2RW82-A2
BZ-2RW82-A2 by Honeywell is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has a SILVER-plated contact, PHENOLIC housing, and STEEL ROLLER actuator. With 15A@480VAC AC max rating, it's ideal for PANEL MOUNT applications in environments ranging from -55°C to 85°C.
11HM1
11HM1 by Honeywell Sensing And Control is a snap action/limit switch with SPDT function, hermetically sealed body, and plunger actuator. It has a max operating temperature of 121°C and can handle up to 1A AC current. Ideal for panel mounting applications requiring corrosion-proof and reliable switching capabilities.
V7-1C37D855-002
V7-1C37D855-002 by Honeywell is a 10.16" snap action switch with SPST function, ideal for panel mounting applications. It has a max AC contact current of 15A@277VAC and DC contact current of 0.5A@125VDC, with an actuator travel of 2.41mm and steel lever type for precise operation.
LSXA3K1
LSXA3K1 by Honeywell Sensing And Control is an explosion-proof SPDT snap action/limit switch with a side rotary actuator. It has a max operating temperature of 121°C and min of -12°C, suitable for panel mounting applications. With a max DC contact voltage of 250V and AC contact voltage of 600V, it offers reliable momentary switch action with wire termination.
XCKJ10513H29
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
V7-5F17D8-336
Honeywell V7-5F17D8-336 is a SPDT snap action/limit switch with 3A@277VAC rating. Featuring 22.35mm body width, 15.88mm height, and 19.52mm actuator travel, it's ideal for panel mount applications requiring momentary switch action in industrial settings.
D2F-01FL
The Omron D2F-01FL is a snap action and limit switch with a body width of 5.8 inch and sealing rating of IP40. It has a hinge lever actuator type and can handle a max DC contact voltage of 30V. This switch is commonly used in applications requiring momentary switch action, such as control panels or industrial machinery.
D3SH-A1L
Omron's D3SH-A1L is a SPST snap action/limit switch with 100000 cycles electrical life. With a body width of 3", it operates b/w -25 to 85°C temperatures. Ideal for applications requiring momentary switch action, it has a max DC contact voltage of 5V and an actuator travel of 3.8mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BZ-2RW82224-A2
Honeywell Sensing And Control's BZ-2RW82224-A2 is a SPDT snap action/limit switch with 15A@480VAC AC rating. Featuring wide sintered stainless steel roller actuator, it has 1.67N max operating force and 2.39mm actuator travel. Ideal for panel mount applications requiring momentary switch action.
BZ-2RQ1-A2
BZ-2RQ1-A2 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a PHENOLIC housing, SILVER plating, and STEEL PLUNGER actuator. Ideal for applications requiring momentary switch action, with max AC contact current of 15A@480VAC and DC contact current of 0.5A@125VDC.
BZ-2RQ784
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL ROLLER; Body Width: 17.45 inch; Maximum AC Contact Current: 15 A;
BZ-2R725551-A2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED PLUNGER; Terminal Finish: Matte Tin (Sn); Actuator Travel (mm): .13;
BZ-2RQ1-D6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): HARDENED STEEL PLUNGER; Maximum Pre Travel: .38 mm; Maximum DC Contact Current: .5 A;
BZ-2RQ1-D682
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): HARDENED STEEL PLUNGER; Body Width: 17.45 inch; Maximum Pre Travel: .38 mm;
BZ-2RW80-A2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STRAIGHT LEVER; Maximum AC Contact Current: 15 A; Body Length/Diameter: 49.28 mm;
BZ-2RW822-A2
BZ-2RW822-A2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 16A@250VAC AC max rating. Featuring a steel roller actuator, it has an actuator travel of 2.39mm and max operating force of 1.67N. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
BZ-2RQ124-D6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): HARDENED STEEL PLUNGER; Maximum DC Contact Voltage: 125 V; Actuator Travel (mm): 5.94;
BZ-2RM22-A2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): WIDE SINTERED STAINLESS STEEL ROLLER; Switch Action: MOMENTARY; DC Maximum Rating R Load (Contact): .5A@125VDC;
BZ-2RW8225551-A2
BZ-2RW8225551-A2 by Honeywell is a SPDT snap action/limit switch with 15A@480VAC AC rating and 0.5A@125VDC DC rating. Featuring PLUNGER actuator type, it has 2.38mm pre-travel and 1.67N max operating force. Ideal for panel mount-threaded applications requiring precise momentary switch action.
BZ-2RS7224-A2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HARDENED STEEL PLUNGER; Manufacturer Series: BZ-2RS7224-A2; Maximum AC Contact Current: 1 A;
BZ-2RW82272-A2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): WIDE SINTERED STAINLESS STEEL ROLLER; Body Height: 29.21 mm; Terminal Finish: Matte Tin (Sn);
BZ-2RW80A2UL
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STRAIGHT LEVER; Maximum Operating Temperature: 85 Cel; AC Maximum Rating R Load (Contact): 15A@250VAC;
BZ-2RL2T04
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER TYPE; Body Height: 23.88 mm; Sealing: CORROSION PROOF;
BZ-2RW80
BZ-2RW80 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. It has a body width of 17.45 inch, body height of 26.42 mm, and actuator travel of 5.56 mm. Ideal for panel mounting applications requiring momentary switch action with solder termination type.
BZ-2RW8024
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Termination Type: SCREW; AC Maximum Rating R Load (Contact): 15A@480VAC; Maximum AC Contact Current: 15 A;
BZ-2RW8072-A2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Actuator Travel (mm): 5.56; Body Length/Diameter: 49.28 mm; Switch Action: MOMENTARY;
BZ-2RW8222-A2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): WIDE SINTERED STAINLESS STEEL ROLLER; Body Width: 17.45 inch; Maximum DC Contact Current: .5 A;
BZ-2RDS-A2-S
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): STEEL PLUNGER; Body Height: 23.5 mm; Maximum AC Contact Voltage: 250 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved