Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
41SM1-H2 by Honeywell is a SPDT snap action/limit switch with 6.35" body width, 9.04mm height, and 0.89mm actuator travel. It has a max AC contact current of 1A@250VAC and DC contact current of 5A@30VDC. Ideal for applications requiring momentary switch action with solder termination type.
Median Price
$3.458
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
$3.510
1k+ parts
10k+ parts
Arrow
$3.407
Verical
Powell Electronics
$4.240
$3.790
Nova Conductors
$9.358
Vyrian
Bristol Electronics
Atlantic Semiconductor
VNN
Q Components
Ampacity Inc.
$2.900
Semicontronic
$2.828
$2.813
Aztec Data Supply Inc.
$4.630
Continental Prestige Electronics
$9.171
Netroflash
Corohmni
$9.405
AZTECH Wire
$15.330
Argo Parts USA
Robosynatics
$3.732
$3.456
Lucentia Tech
Assy Fe
Perfect Parts
The compact body width of 6.35 inch makes this snap action and limit switch suitable for installations where space is limited.
Single Pole Double Throw switch function provides versatility in controlling a circuit with multiple output options.
The low profile body height of 9.04 mm allows for easy integration into various electronic devices or systems.
With a maximum AC contact current of 1 A, this switch is suitable for low to moderate current applications in AC circuits.
The actuator travel distance of 0.89 mm ensures precise and reliable operation of the switch.
The plastic plunger actuator type offers durability and smooth actuation for long-lasting performance.
The maximum DC contact voltage of 30 V makes this switch suitable for low voltage DC applications.
The combination of snap acting and limit switch types allows for precise and immediate switching action when the set limit is reached.
The high AC maximum rating of 1A at 250VAC ensures reliable performance in AC circuits within the specified limits.
The compact body length/diameter of 19.84 mm contributes to the overall small footprint of the switch for versatile mounting options.
The low maximum operating force of 1.39 N allows for easy actuation of the switch without excessive effort.
The high DC maximum rating of 5A at 30VDC provides reliable operation in DC circuits with moderate current requirements.
With a maximum DC contact current of 5 A, this switch can handle higher current loads in DC applications.
The momentary switch action allows for temporary activation or deactivation of the circuit, ideal for applications requiring a brief signal.
The solder termination type provides a secure and reliable connection for the switch in electronic circuits.
The high maximum AC contact voltage of 250 V allows for use in a wide range of AC circuits with varying voltage requirements.
The maximum pre-travel distance of 0.76 mm ensures precise and accurate switch actuation before reaching the set limit.
The through-hole straight mounting feature allows for easy and secure installation of the switch on a circuit board or panel.
Snap Action & Limit Switches 41SM1-H2 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
41SM1-H2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Taitron Components
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
XCKJ10511
Schneider Electric Sa
XCKJ10511 by Schneider Electric Sa is a SNAP ACTING/LIMIT SWITCH with 3A@240VAC AC Max Rating. Featuring a LOCKING LEVER actuator, it has N.O.-N.C. contact function and SNAP ACTION timing. Ideal for PANEL MOUNT applications, made of THERMOPLASTIC material with SCREW termination type.
109HM1
Honeywell Sensing And Control
109HM1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and hermetically sealed for corrosion protection. It operates b/w -184°C to 121°C, has a max DC contact voltage of 28V, and is ideal for panel mounting applications requiring momentary switch action.
608.8121.015
Altech
SNAP ACTING/LIMIT SWITCH;
D4NL-4CFA-B
Omron
ESE58R11B
The Panasonic ESE58R11B is a SPST snap action/limit switch with 50000 cycles electrical life. With a body width of 3", it operates b/w -10 to 60°C temperatures. Featuring a max DC contact voltage of 5V, it is ideal for surface mount-right angle applications requiring momentary switch action.
AV440461
AV440461 by Panasonic is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring a PIN PLUNGER actuator, it has 0.4mm actuator travel and 0.98N max operating force. Ideal for applications requiring momentary switch action, with SOLDER termination type and -25 to 80°C operating temperature range.
D4MC-5020
Omron D4MC-5020 is a SPDT snap action/limit switch with 500000 cycles electrical life. Featuring IP67 sealing, it has a max operating temperature of 80°C and can handle up to 10A@250VAC. Ideal for panel mounting applications requiring reliable momentary switch action in industrial settings.
WOI1A00APAR
Z-15GK355-B
Omron Z-15GK355-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and sealing rating of IP62. With a max AC contact current of 15A@250VAC, it is ideal for panel mounting applications requiring momentary switch action.
JX-51
JX-51 by Honeywell Sensing And Control is a Snap Action & Limit Switch with a 5.59" wide body, corrosion-proof sealing, and 0.64mm actuator travel. It features a steel roller actuator type, momentary switch action, and 1.67N max operating force. Ideal for panel mounting applications requiring reliable wire termination in industrial settings.
3AC6-D8
3AC6-D8 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 12.7" body width, 40.49mm height, and 6.35mm actuator travel. It has a max AC contact current of 15.1A@250VAC and DC contact current of 0.5A@125VDC, making it suitable for panel mount applications requiring momentary switch action.
D2SW-3H
Snap Acting/Limit Switches;
31EN11-6
The Honeywell Sensing And Control 31EN11-6 is a corrosion-proof SPDT snap action/limit switch with roller lever actuator. It has a max DC contact voltage of 28V and can handle up to 5A@28VDC. Ideal for panel mount-threaded applications, it operates b/w -55°C to 85°C temperatures.
5XE1-T
5XE1-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with 8.03" body width, 17.65mm height, and 1.37mm actuator travel. It features corrosion-proof sealing, epoxy terminal seal, and a spherical steel plunger type actuator. Ideal for applications requiring momentary switch action and panel mounting with a max DC contact voltage of 28V and current rating of 7A@28VDC.
D2F-01L3-A1
Omron's D2F-01L3-A1 snap action switch offers 30000 cycles electrical life, SPDT switch function, and IP40 sealing. Ideal for applications requiring a momentary switch with simulated roller lever actuator, operating b/w -25°C to 65°C.
D4NL-1EFA-B
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
83183001
Crouzet
D2F-L2-A
Omron's D2F-L2-A snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a max AC contact current of 3A@125VAC, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 65 °C.
311SM6-T2
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
DC3CA1LB
The Cherry
DC3CA1LB by The Cherry is a snap action/limit switch with SPDT function. It features a polyester housing, copper alloy terminals, and gold-plated contacts. With an IP67 sealing rating, it is ideal for applications requiring reliable switching in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
41SM1-H251
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Minimum Operating Temperature: -54 Cel; Maximum Operating Temperature: 121 Cel;
41SM28-H2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Maximum Pre Travel: .76 mm; Maximum DC Contact Voltage: 30 V;
41SM1-T
41SM1-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a body width of 6.35 inch, max operating temperature of 121°C, and AC contact current rating of 11A@250VAC. Ideal for panel mounting applications requiring momentary switch action with screw termination type.
41SM1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Actuator Travel (mm): .89; Maximum Operating Force: 1.39 N;
41SM2-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SPHERICAL PLASTIC PLUNGER; Switch Action: MOMENTARY; DC Maximum Rating R Load (Contact): 5A@30VDC;
41SM27-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Maximum AC Contact Current: 11 A; Body Height: 1.05 mm;
41SM301
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Maximum Operating Force: 1.39 N; Maximum Pre Travel: .76 mm;
41SM28-T2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SPHERICAL PLASTIC PLUNGER; Actuator Travel (mm): .89; AC Maximum Rating R Load (Contact): 11A@250VAC;
41SM1-T2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Maximum AC Contact Voltage: 250 V; Body Length/Diameter: 19.84 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved