Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
16HM1-1 by Honeywell Sensing And Control is a hermetically sealed SPDT snap acting/limit switch with a body width of 6.35 inch and max operating temperature of 260°C. It has a max AC contact current of 1A and is ideal for panel mounting applications requiring momentary switch action.
Median Price
$934.690
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Master Electronics
1+ parts
$916.360
100+ parts
-
1k+ parts
10k+ parts
Sager
Verical
$1,078.071
DigiKey
$3,038.280
$2,859.605
$2,802.413
Powell Electronics
$747.750
$697.890
$648.050
IBS Electronics
$1,182.854
Vyrian
VNN
Nova Conductors
Corohmni
$2.141
Advanced Electronics
$2.908
$2.646
$2.385
AZTECH Wire
$12.660
Ampacity Inc.
$2,083.260
Argo Parts USA
Continental Prestige Electronics
Assy Fe
Aranea Global
The compact body width allows for easy installation in tight spaces.
Hermetically sealed design ensures protection against dust, moisture, and other environmental factors, making it suitable for various applications.
Single Pole Double Throw switch function provides versatility in switching between two different circuits.
Low profile body height enables the switch to be discreetly mounted without taking up much space.
High operating temperature range allows the switch to function reliably in extreme conditions.
Able to handle up to 1A of AC current, making it suitable for low-power applications.
Wide operating temperature range ensures the switch can operate in extremely cold conditions without any issues.
Precise actuator travel distance allows for accurate switching between positions.
Capable of handling up to 28V of DC voltage, making it suitable for low-voltage DC circuits.
Snap acting/limit switch type provides quick and reliable switching action for various applications.
The switch can handle up to 1A of current at 115VAC, making it suitable for most AC applications.
Compact body length allows for easy integration into existing systems or control panels.
Low operating force requirement ensures easy actuation of the switch.
Can handle up to 3A of current at 28VDC, making it suitable for higher power DC applications.
Capable of handling up to 3A of DC current, offering versatility in DC circuit applications.
Momentary switch action provides temporary contact closure, ideal for applications requiring temporary circuit activation.
Wire termination allows for easy connection to existing wiring systems.
Capable of handling up to 115V AC voltage, suitable for a wide range of AC applications.
Minimum pre-travel distance ensures accurate switching action with minimal delay.
Panel mount design allows for easy and secure installation on control panels or equipment cabinets.
Snap Action & Limit Switches 16HM1-1 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
16HM1-1 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Promax-johnton
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
DC1CC3LC
The Cherry
The Cherry DC1CC3LC snap action/limit switch has a polyester housing, copper alloy terminals, and 6000 cycle electrical life. With IP67 sealing, it is ideal for applications requiring SPDT switch function, such as panel mounting in environments with temperatures ranging from -40 to 120°C.
GLCA01A1B
Honeywell Sensing And Control
GLCA01A1B by Honeywell Sensing And Control is a 30mm wide snap action/limit switch with SPDT function, IP66 sealing, and side rotary roller lever actuator. It operates b/w -25°C to 85°C, handles up to 6A@120VAC or 0.55A@125VDC, and mounts on panels. Ideal for industrial automation applications requiring reliable momentary switching.
D2FS-FL-N-A1
Omron
SNAP ACTING/LIMIT SWITCH;
914CE31-AQ
914CE31-AQ by Honeywell is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring steel roller actuator, it has 4.8mm travel and 22.24N operating force. Ideal for panel mount applications requiring momentary switch action in industrial settings.
DC1CC4RB
The Cherry DC1CC4RB snap action/limit switch has a polyester housing, copper alloy terminals, and 6000 cycles electrical life. With IP67 sealing, SPDT switch function, and silver over nickel plating, it's ideal for applications requiring a durable and reliable switching solution in various industries.
311SM43-T
311SM43-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and height of 9.04mm. It has a max operating temperature of 121°C, AC contact current of 1A, and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with wire termination.
D2VW-5L1B-1MS
The Omron D2VW-5L1B-1MS is a snap action and limit switch with an electrical life of 100,000 cycles. It has a sealing rating of IP67, making it suitable for use in harsh environments. With a max AC contact current of 5A and a max DC contact voltage of 30V, it is commonly used in applications that require precise momentary switching.
ESE58L11A
Panasonic
The Panasonic ESE58L11A is a SPST snap action/limit switch with 50000 cycles electrical life. It has a body width of 3" and max operating force of 0.3N, suitable for surface mount-right angle applications. With a max DC contact voltage of 5V and actuator travel of 2.1mm, it operates b/w -10°C to 60°C temperatures efficiently.
ADPDC2T04AC
Itt Cannon
ITT Cannon's ADPDC2T04AC is a DPDT snap acting/limit switch with 200000 cycles electrical life. Featuring a lever actuator type, it has a max AC contact current of 15A@250VAC and operates b/w -55 to 85 °C. Ideal for panel mounting applications, this switch offers momentary switch action with quick connect termination.
ESE58R11A
The Panasonic ESE58R11A is a SPST snap action/limit switch with 50000 cycles electrical life. It has a body width of 3" and operates b/w -10 to 60°C. With a max DC contact voltage of 5V, it is ideal for applications requiring momentary switch action in surface mount-right angle configurations.
AV4544
AV4544 by Panasonic is a SPDT snap acting/limit switch with 20000 cycles electrical life. Featuring a simulated roller lever actuator, it has a max operating force of 0.29N and can handle 0.5A@30VDC DC max rating R load. Ideal for applications requiring momentary switch action in temperatures ranging from -25°C to 80°C.
4TL132-12
4TL132-12 by Honeywell Sensing And Control is a 4PDT snap action/limit switch with dimensions of 33.53" x 34.29 mm x 41.66 mm. It has a max AC contact current of 15A@277VAC and DC contact voltage of 30V, suitable for panel mounting applications requiring momentary switch action.
GLDA01A2B
GLDA01A2B by Honeywell Sensing And Control is a SPDT snap action/limit switch with IP66 sealing. It has a max AC contact current of 6A@120VAC and a max DC contact current of 0.55A@125VDC. Ideal for panel mounting applications, it features a side rotary adjustable lever actuator.
V7-1C17D844-429
Honeywell Sensing And Control's V7-1C17D844-429 is a SPDT snap action/limit switch with 10.2" width, 15.9mm height, and 3.05mm actuator travel. It operates b/w -40 to 82°C, handles up to 15A@250VAC for AC contact current, and has a max force of 1.27N. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
LSA2B25-5D
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: HDLS; AC Maximum Rating R Load (Contact): A@VAC; DC Maximum Rating R Load (Contact): A@VDC;
D2F-01L-D3
Omron's D2F-01L-D3 snap action switch has an electrical life of 30k cycles, SPDT switch function, and IP40 sealing. With a body width of 5.8in and actuator travel of 0.55mm, it is ideal for panel mounting applications requiring momentary switch action at temperatures ranging from -25 to 65°C.
12SX1-T
12SX1-T by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a max operating temperature of 121°C, AC contact current of 1A, and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with a compact body width of 5.08" and actuator travel of 0.6mm.
11SM401-H58
11SM401-H58 by Honeywell Sensing And Control is a snap action/limit switch with a body width of 6.35 inch and a body height of 9.04 mm. It has a max AC contact current of 5A and is commonly used for panel mounting applications.
D4C-1424
Omron D4C-1424 is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP67 sealing, it has a roller lever actuator type and operates b/w -10°C to 70°C. Ideal for panel mounting applications, it can handle up to 5A@250VAC AC load and 4A@30VDC DC load.
SS-5GL111-F-3T
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved