Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIPLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$2.253
$2.096
IDEA Electronic Components Group
$2.423
$2.302
DigiPath Technology Company
$3.780
$3.629
One Stop Electronics
$12.000
AZTECH Wire
$14.228
Semicontronic
$23.000
$22.425
$22.310
Ampacity Inc.
$24.000
Corphita
RF/Microwave Mixers HMC688LP4TR attributes and parameters. Explore more RF/Microwave Mixers devices from Hittite Microwave
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Daco Semiconductor
Changzhou Starsea Electronics
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Wuxi Xuyang Electronic
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Littelfuse
Digitron Semiconductors
Surge Components
LTC5541IUH#PBF
Analog Devices
LTC5541IUH#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 85 °C. It features double balanced construction, 50 ohm impedance, and operates b/w 1300-2300 MHz. Ideal for applications requiring high-frequency signal mixing in various RF systems.
AD8342ACPZ-R2
AD8342ACPZ-R2 by Analog Devices is a RF/Microwave Mixer with 16 terminals, operating from 50 MHz to 2400 MHz. It has a max input power of 12 dBm and operates at temperatures ranging from -40 °C to 85°C. Ideal for applications requiring double balanced technology and a characteristic impedance of 50 ohms.
HMC558LC3BRTR
Analog Devices' HMC558LC3BRTR is a GAAS RF/Microwave Mixer with 12 terminals. It operates b/w -40°C to 85°C, featuring a ceramic package for surface mount applications. Ideal for high-frequency signal processing in communication systems.
HMC554A-SX
HMC554A-SX by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, 10 dB conversion loss, and 25 dBm CW input power. It operates b/w -40°C to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 10-20 GHz.
HMC521LC4
Analog Devices' HMC521LC4 is an RF/Microwave Mixer with 20 dBm CW input power, 10 dB max conversion loss, and 50 ohm impedance. Ideal for applications requiring image rejection, it operates b/w 8.5-13.5 GHz with a temperature range of -55 to +85°C.
HMC140
Analog Devices' HMC140 is a GAAS double balanced RF/Microwave Mixer with 12 dB max conversion loss. Operating from -55 °C to 125°C, it covers 1-2 GHz range. Ideal for applications requiring high frequency signal mixing in harsh environments.
HMC213AMS8ETR
Analog Devices' HMC213AMS8ETR is a GAAS technology RF/Microwave Mixer with 8 terminals and matte tin finish. It operates b/w -40 °C to 85°C, making it suitable for various applications requiring double balanced surface mount devices.
M77
Wj Communications
DOUBLE BALANCED; Minimum Operating Frequency: 8000 MHz; Construction: MODULE; Maximum Operating Frequency: 12500 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel;
HMC688LP4
Analog Devices' HMC688LP4 is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It features a max input power of 23 dBm, triple balanced technology, and a conversion loss of 10 dB. Ideal for applications requiring high frequency operation b/w 2-2700 MHz in surface mount configurations.
HMC526LC4
HMC526LC4 by Analog Devices is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It features GaAs technology, 50 ohm impedance, and offers image rejection with a conversion loss of 9.5 dB. Ideal for applications requiring high input power handling up to 20 dBm in frequencies ranging from 6-10 GHz.
JMS-2LH+
Mini-circuits
JMS-2LH+ by Mini-circuits is a RF/Microwave Mixer with 6 terminals, operating from 20 MHz to 1000 MHz. It offers a max input power of 17 dBm and a low conversion loss of 9 dB, making it ideal for applications requiring high frequency signal mixing in components like amplifiers and transceivers.
HMC144LC4RTR
Analog Devices' HMC144LC4RTR is a GAAS RF/Microwave Mixer with 24 terminals in a ceramic package. It operates b/w -40°C to 85°C, making it suitable for various surface mount applications in the RF and microwave domains.
HMC141LH5
Analog Devices' HMC141LH5 is a RF/Microwave Mixer with 13 dBm CW input power, 85°C max temp, and 50 ohm impedance. Ideal for applications requiring double balanced mixers in the frequency range of 7-14 GHz.
HMC1106
Analog Devices' HMC1106 is a triple balanced RF/Microwave Mixer with 50 ohm impedance. It offers a max input power of 17 dBm, conversion loss of 14 dB, and operates b/w 15-36 GHz. Ideal for high-frequency applications requiring precise signal mixing in temperatures ranging from -55 to +85°C.
HMC215LP4TR
Analog Devices' HMC215LP4TR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply, drawing a max of 60mA. Ideal for surface mount applications due to its plastic/epoxy package body material and double balanced design.
ADL5353XCPZ-WP
ADL5353XCPZ-WP by Analog Devices is a BICMOS RF/Microwave Mixer with 20 terminals. It operates b/w -40°C to 85°C, powered by 5V supply. The package body material is PLASTIC/EPOXY, suitable for surface mount applications in various electronic systems.
TA4101F(TE85L)
Toshiba
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
HMC774A
Analog Devices' HMC774A is a double balanced RF/Microwave Mixer with 50 ohm impedance. It offers a max input power of 21 dBm, conversion loss of 13 dB, and operates b/w 7-43 GHz. Ideal for high-frequency applications requiring precise signal mixing in temperatures ranging from -55 to 85 °C.
LTC5569IUF#PBF
LTC5569IUF#PBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, operating from -40 to 105 °C. It features double balanced design, 50 ohm impedance, and operates b/w 300-4000 MHz. Ideal for high-frequency applications in various industries.
LTC5577IUF#TRPBF
Linear Technology
DOUBLE BALANCED; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved