Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Maximum Conversion Loss: 14 dB;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Chip Stock
Parana Technologies
$0.809
$0.752
IDEA Electronic Components Group
$0.870
$0.826
DigiPath Technology Company
$1.357
$1.303
AZTECH Wire
$5.140
Semicontronic
$28.000
$27.300
$27.160
One Stop Electronics
$29.000
Corphita
RF/Microwave Mixers HMC663LC3 attributes and parameters. Explore more RF/Microwave Mixers devices from Hittite Microwave
Characteristic Impedance:
Construction:
Maximum Conversion Loss:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
HMC663LC3 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Hy Electronic
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Sangdest Microelectronics (Nanjing)
Eic Semiconductor
SKY-60+
Mini-circuits
The Mini-circuits SKY-60+ RF/Microwave Mixer has a max input power of 23 dBm, VSWR of 5.87, and conversion loss of 9.7 dB. Ideal for applications requiring double balanced components in the frequency range of 2500-6000 MHz with surface mounting feature.
HMC220AMS8E
Analog Devices
Analog Devices' HMC220AMS8E is a RF/Microwave Mixer with 50 ohm impedance, 10.5 dB conversion loss, and 13 dBm CW input power. It operates from -40 to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 5-12 GHz.
HMC258LC3B
Analog Devices' HMC258LC3B is a RF/Microwave Mixer with 50 ohm impedance, 14 dB max conversion loss, and 13 dBm CW input power. It operates b/w 14500-19500 MHz, ideal for high-frequency applications requiring double balanced construction and operating temperatures from -40 to 85°C.
HMC520ALC4
HMC520ALC4 by Analog Devices is a RF/Microwave Mixer with GaAs technology. It operates from 6-10 GHz, offers 50 ohm impedance, and has a max conversion loss of 10 dB. Ideal for image rejection applications due to its ceramic package and gold terminal finish with Ni barrier.
HMC338LC3BRTR
Analog Devices' HMC338LC3BRTR is a GAAS RF/Microwave Mixer with 12 terminals, operating from -40 to 85°C. It requires a 4V power supply and draws a max current of 40mA. This ceramic-packaged mixer is ideal for surface mount applications in various RF systems.
BGA2021
NXP Semiconductors
DOUBLE BALANCED; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 500 MHz; Maximum Input Power (CW): 3 dBm; Maximum Operating Frequency: 2500 MHz; Construction: COMPONENT;
HMC663LC3
Analog Devices' HMC663LC3 is a ceramic RF mixer with 16 terminals, operating from -40 to 85°C. Featuring GaAs technology, it offers double balanced performance with a frequency range of 6-12 GHz and conversion loss of 14 dB. Ideal for high-power applications up to 23 dBm in surface-mount setups.
HMC1015
Analog Devices' HMC1015 is a RF/Microwave Mixer with 15.5 dBm CW input power, 13 dB conversion loss, and 26-32 GHz frequency range. Triple balanced design with gold finish makes it ideal for high-frequency applications in communications and radar systems.
HMC526LC4RTR
Analog Devices' HMC526LC4RTR is a GAAS RF/Microwave Mixer with 24 terminals in a ceramic package. It operates b/w -40°C to 85°C, making it suitable for various applications requiring surface mount technology.
UMX-520
Broadcom
DOUBLE BALANCED; Maximum Input Power (CW): 23 dBm; Minimum Operating Frequency: 1 MHz; Characteristic Impedance: 50 ohm; Maximum Conversion Loss: 7 dB; Maximum Operating Temperature: 100 Cel;
CMY211
Triquint Semiconductor
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Conversion Loss: 7.5 dB;
HMC1056LP4BETR
HMC1056LP4BETR by Analog Devices is a RF/Microwave Mixer with 20 terminals, operating frequency range of 8-12 GHz, and max input power of 16 dBm. It utilizes GaAs technology for image rejection applications in the temperature range of -40 to 85°C. The component is designed for surface mounting with a characteristic impedance of 50 ohms and max conversion loss of 11 dB.
HMC292ALC3BTR
Analog Devices' HMC292ALC3BTR is a RF/Microwave Mixer with 18 dBm CW input power, 50 ohm impedance, and 12.5 dB conversion loss. It operates b/w -40°C to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 14-30 GHz.
ADL5355ACPZ-R7
ADL5355ACPZ-R7 by Analog Devices is a RF/Microwave Mixer with 20dBm CW input power, operating from -40 to 85 °C. It features BICMOS technology, double balanced design, and operates b/w 1200-2500MHz. Ideal for applications requiring high-frequency signal mixing in compact designs.
LTC5549IUDB#TRPBF
DOUBLE BALANCED; Maximum Operating Temperature: 105 Cel; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 2000 MHz; Maximum Input Power (CW): 20 dBm;
HMC130
Analog Devices' HMC130 is a GAAS double balanced RF mixer with 50 ohm impedance. It operates from -55°C to 85°C, covering frequencies from 6 GHz to 11 GHz. Ideal for RF/microwave applications requiring low conversion loss and gold terminal finish for high performance.
HMC400MS8
Analog Devices' HMC400MS8 is a RF/Microwave Mixer with 27 dBm CW input power, 11 dB conversion loss, and 1700-2200 MHz frequency range. It's a double balanced component ideal for surface mount applications in GAAS technology, offering 50 ohm impedance for various RF/microwave systems.
HMC215LP4ETR
Analog Devices' HMC215LP4ETR is a GAAS technology RF mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply and draws a max current of 60mA. Ideal for RF/microwave applications, it features a double balanced design and surface mounting feature.
ADL5353XCPZ-R7
ADL5353XCPZ-R7 by Analog Devices is a BICMOS RF/Microwave Mixer with 20 terminals, operating from -40 to 85°C. It requires a 5V power supply and features a surface mount package body ideal for various applications in the RF/microwave domain.
HMC144LH5
HMC144LH5 by Analog Devices is a RF/Microwave Mixer with GaAs technology, featuring 12 terminals and a double balanced design. It operates b/w 6-20 GHz, with max conversion loss of 13 dB and CW input power up to 15 dBm. Ideal for high-frequency applications requiring surface mount packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved