Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Control Voltage: 13 V; Minimum Operating Temperature: -40 Cel; Offset Frequency: 100 kHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
One Stop Electronics
$1.010
Semicontronic
$2.010
$1.960
$1.950
Parana Technologies
$3.231
$3.005
IDEA Electronic Components Group
$3.474
$3.300
Ampacity Inc.
$5.010
DigiPath Technology Company
$5.419
$5.203
AZTECH Wire
$17.699
Corphita
VCO Voltage Controlled Oscillators HMC632LP5TR attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Hittite Microwave
Additional Features:
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3203F
Idec
ROTARY SWITCH;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Jiangsu Jiejie Microelectronics
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Digitron Semiconductors
Cheng-yi Electronic
MAX2624EUA+
Analog Devices
Analog Devices' MAX2624EUA+ is a VCO with -101 dBc/Hz phase noise, 3V supply, and -8 dBm output power. Ideal for applications requiring precise frequency control in compact designs due to its small 3.05mm x 3.05mm x 1.1mm form factor and surface mounting feature. Operating b/w -40°C to 85°C, it offers a wide frequency range from 947 MHz to 998 MHz.
SN74LS624NE4
Texas Instruments
SN74LS624NE4 by Texas Instruments is a VCO with 14 terminals, operating b/w -55°C to 125°C. It has a supply voltage range of 4.5V to 5.5V and operates at frequencies from 0.000001 MHz to 20 MHz. Ideal for applications requiring precise voltage-controlled oscillation in various temperature conditions.
T602B_VCO_2
Infineon Technologies
Voltage Controlled Oscillators;
HMC398QS16GE
Analog Devices' HMC398QS16GE is a VCO with 260mA supply current, 3dBm output power, and -105 dBc/Hz phase noise. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 1400MHz to 1500MHz.
HMC431LP4ETR
Analog Devices' HMC431LP4ETR is a VCO with -102 dBc/Hz phase noise, 5500-6100 MHz operating frequency range, and 3.25V max supply voltage. Ideal for applications requiring precise frequency control in compact designs like RF transceivers and wireless communication systems.
HTO-7500
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Operating Frequency: 11000 MHz; Minimum Operating Frequency: 7500 MHz; Package Equivalence Code: CAN4,.2;
HMC358MS8GTR
HMC358MS8GTR by Analog Devices is a VCO with max supply voltage of 3.25V, output power of 8dBm, and phase noise of -110 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 5.8-6.8 GHz, this compact device has a small form factor of 3.1mm x 3.1mm x 1.1mm and operates b/w -40 to +85 °C temperatures efficiently on a nominal voltage of 3V.
HMC430LP4TR
Analog Devices' HMC430LP4TR is a VCO with 24 terminals, operating at 5-5.5 GHz frequency range. It has -103 dBc/Hz phase noise, -1 dBm output power, and operates on 3V supply voltage. Ideal for applications requiring precise frequency control in compact designs.
LTC6992HDCB-2#TRMPBF
LTC6992HDCB-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
MAX2750EUA+
Analog Devices' MAX2750EUA+ is a VCO with modulation sensitivity of 140 MHz/V, -125 dBc/Hz phase noise, and output power of -3 dBm. Ideal for applications requiring precise frequency control in the range of 2400-2500 MHz, such as wireless communication systems.
HMC6475LC4B
Analog Devices' HMC6475LC4B is a VCO with 70mA supply current, 5dBm output power, and -106dBc/Hz phase noise. Ideal for applications requiring voltage-controlled oscillators in the frequency range of 3.9GHz to 7.5GHz. Dimensions are 4.05mm x 4.05mm x 1.2mm, suitable for surface mount installations at temperatures ranging from -40 °C to +85°C.
HMC510LP5TR
Analog Devices' HMC510LP5TR is a VCO with 10 dBm output power, -116 dBc/Hz phase noise, and operates b/w 8450-9550 MHz. It has a max supply voltage of 5.25V and current of 360mA. Ideal for applications requiring precise frequency control in compact designs.
HTO-2600R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Supply Current: 100 mA; Minimum Operating Frequency: 2600 MHz; Maximum Operating Frequency: 5200 MHz;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Output Power: -3 dBm; Minimum Control Voltage: .4 V; Minimum Operating Frequency: 2400 MHz; Terminal Finish: MATTE TIN;
HMC513LP5TR
Analog Devices' HMC513LP5TR is a VCO with 3.25V max supply voltage, 290mA max supply current, and 5dBm output power. Ideal for applications requiring precise frequency control in the range of 10.43GHz to 11.46GHz, such as radar systems and communication equipment.
HMC1165LP5ETR
Analog Devices' HMC1165LP5ETR is a VCO with 32 terminals, operating b/w -40 °C to 85°C. It offers modulation sensitivity of 310 MHz/V, output power of 8 dBm, and phase noise at -88 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 11.07 GHz to 11.62 GHz.
HMC131C8
Analog Devices' HMC131C8 is a VCO with 300 MHz/V modulation sensitivity, 16 dBm output power, and -65 dBc/Hz phase noise. Ideal for applications requiring precise frequency control in the 5-6 GHz range.
LTC6992HDCB-4#TRMPBF
LTC6992HDCB-4#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a voltage control range of 0.1V to 0.9V and operates b/w -40 °C to 125°C. This compact device in PLASTIC/EPOXY package is ideal for applications requiring precise frequency control in limited space.
VTO-2150-SMD
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Output Power: 0 dBm; Modulation Sensitivity: 40 MHz/V; Package Equivalence Code: MODULE(UNSPEC); Phase Noise: -100 dBc/Hz;
HMC416LP4TR
Analog Devices' HMC416LP4TR is a VCO with 24 terminals, operating b/w 2.75-3.25V, outputting 4.5 dBm power at frequencies from 2750-3000 MHz. With -114 dBc/Hz phase noise and compact dimensions of 4.1mm x 4.1mm x 1.0mm, it's ideal for applications requiring precise voltage-controlled oscillation in a surface-mount package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved