Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MODULATOR;
Median Price
$33.840
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
100+ parts
$26.083
1k+ parts
$19.720
10k+ parts
-
DigiKey
$40.120
$30.172
Verical
$21.212
Digiode
$30.913
Vyrian
Parana Technologies
$0.905
$0.842
IDEA Electronic Components Group
$0.973
$0.924
DigiPath Technology Company
$1.518
$1.457
Ampacity Inc.
$20.820
Semicontronic
$20.300
$20.195
Corphita
$29.286
RC Electronics
$32.230
$29.240
$28.210
RF/Microwave Modulator/Demodulators HMC631LP3ETR attributes and parameters. Explore more RF/Microwave Modulator/Demodulators devices from Hittite Microwave
RF or Microwave Device Type:
PCN Assembly/Origin - HMCx A/T Rev 29/Mar/2023
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Electronic Transistors
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Continental Device India
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
ADL5380ACPZ-R7
Analog Devices
ADL5380ACPZ-R7 by Analog Devices is an RF demodulator with I/Q modulation, operating from 400MHz to 6GHz. It has a max input power of 15dBm and operates b/w -40°C to 85°C. Ideal for RF/microwave applications requiring high-frequency demodulation.
LT5568EUF#TR
Analog Devices' LT5568EUF#TR is an RF modulator with I/Q modulation technique, operating b/w 700-1050 MHz. It has a temperature range of -40 to 85 °C and characteristic impedance of 50 ohm. Ideal for RF/microwave applications requiring precise modulation/demodulation in various environments.
AD8347ARU-REEL7
AD8347ARU-REEL7 by Analog Devices is an RF demodulator with 800-2700 MHz frequency range, 50 ohm impedance, and 10 dBm CW input power. It operates in temperatures from -40 to 85 °C, suitable for quadrature phase modulation applications in RF systems.
RV1S9353ACCSP-120V
Renesas Electronics
X21NNPLT
X21NNPLT by Analog Devices is an RF demodulator with 0 dBm CW input power, VSWR of 2, and QUADRAPHASE modulation. It operates b/w 400-700 MHz, ideal for wireless communication systems requiring precise signal processing in the temperature range of 0-70 °C.
ADL5375ACPZ-15-WP
ADL5375ACPZ-15-WP by Analog Devices is a RF modulator with Quadrature Phase modulation. It operates b/w -40 °C to 85°C, covering frequencies from 400 MHz to 6 GHz. Ideal for RF/Microwave applications requiring precise modulation techniques.
HMC597LP4E
Analog Devices' HMC597LP4E is an RF demodulator with 100-4000 MHz frequency range, 50 ohm impedance, and I/Q modulation. It can handle up to 12 dBm CW input power, making it ideal for RF/microwave applications requiring precise signal demodulation in temperatures ranging from -40 to 85°C.
ADRF6702ACPZ-R7
Analog Devices' ADRF6702ACPZ-R7 is an RF/Microwave Modulator/Demodulator with I/Q modulation, operating b/w -40°C to 85°C. It has a characteristic impedance of 50 ohm and supports frequencies from 1200 MHz to 2400 MHz. Ideal for applications requiring precise modulation/demodulation in RF systems.
LT5517EUF#TR
Analog Devices' LT5517EUF#TR is a RF/Microwave Modulator with Quadrature Phase modulation. It operates b/w -40 °C to 85°C, covering frequencies from 40MHz to 900MHz. Ideal for applications requiring precise modulation/demodulation in RF systems.
LT5516EUF#PBF
LT5516EUF#PBF by Analog Devices is a RF demodulator with Quadrature Phase Modulation. Operating from -40°C to 85°C, it supports frequencies from 800 MHz to 1500 MHz. Ideal for RF/Microwave applications requiring precise demodulation in a compact component package.
TA8778ASN
Toshiba
LT5568-2EUF#PBF
LT5568-2EUF#PBF by Analog Devices is an RF modulator with 600-1100 MHz frequency range, 5 dBm CW input power, and quadrature modulation. Ideal for applications requiring high-performance modulators in the RF/microwave domain.
LT5546EUF#PBF
LT5546EUF#PBF by Analog Devices is an I/Q modulator/demodulator component with a temperature range of -40°C to 85°C. It operates in the frequency range of 40MHz to 500MHz, making it suitable for RF applications. The device features matte tin terminal finish and is ideal for demodulation purposes in RF/microwave systems.
MAX2451CSE-T
Maxim Integrated
DEMODULATOR; Modulation Technique: QUADRAPHASE; Terminal Finish: TIN LEAD; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; Maximum Operating Frequency: 160 MHz;
HMC631LP3E
HMC631LP3E by Analog Devices is a RF/Microwave Modulator with 27 dBm CW input power, VECTOR modulation technique, and 50 ohm impedance. It operates b/w -40°C to 85°C, suitable for applications requiring MODULATOR devices in the frequency range of 1800-2700 MHz.
ADL5375-05ACPZ-WP
ADL5375-05ACPZ-WP by Analog Devices is an RF modulator with I/Q modulation technique. It operates b/w 400 MHz to 6000 MHz, suitable for various RF applications. With a temperature range of -40 °C to 85°C, it offers reliable performance in diverse environments.
TA1235FN
DEMODULATOR; Modulation Technique: I/Q; Construction: COMPONENT; Minimum Operating Temperature: -20 Cel; Minimum Operating Frequency: 30 MHz; Maximum Operating Temperature: 75 Cel;
X21NNTLT
X21NNTLT by Analog Devices is an RF demodulator with a max input power of 0 dBm and VSWR of 2. It operates b/w 400-700 MHz, ideal for Quadrature Phase Shift Keying modulation in RF applications. With a temp range of 0-70 °C, it's suitable for various wireless communication systems.
UPC8126K-E1
MODULATOR; Construction: COMPONENT; Maximum Operating Temperature: 75 Cel; Maximum Voltage Standing Wave Ratio: 1.5; Maximum Input Power (CW): 9 dBm; Modulation Technique: QUADRAPHASE;
LT5502EGN#PBF
Linear Technology
DEMODULATOR; Maximum Operating Frequency: 400 MHz; Characteristic Impedance: 50 ohm; Modulation Technique: QUADRAPHASE; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Hittite Microwave
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved