Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Control Voltage: 12 V;
Median Price
$53.610
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$47.970
10k+ parts
$45.140
Arrow
Verical
Digiode
$56.592
Vyrian
Parana Technologies
$0.114
$0.106
IDEA Electronic Components Group
$0.123
$0.117
DigiPath Technology Company
$0.192
$0.184
Advanced Electronics
$0.617
$0.561
$0.506
Semicontronic
$50.630
$49.364
$49.111
Corphita
$53.613
QUARKTWIN TECHNOLOGY LTD
VCO Voltage Controlled Oscillators HMC534LP5 attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Hittite Microwave
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
HMC534LP5 Oscillators trade compliance attributes, and parameters.
ECCN
3A001.A.11.B
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N7002
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Vicor
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
SN74LS624FN3
Texas Instruments
SN74LS624FN3 by Texas Instruments is a TTL VCO with 5V supply, operating b/w 0-70°C. It features a voltage-controlled oscillator type and surface mounting, suitable for applications requiring precise frequency control in electronic circuits.
HMC508LP5
Analog Devices
Analog Devices' HMC508LP5 is a VCO with 5.25V max supply voltage, 280mA max supply current, and 12dBm output power. Ideal for applications requiring precise frequency control in the range of 7.3-8.2GHz, such as radar systems and communication equipment.
LTC6992IS6-2#WTRPBF
LTC6992IS6-2#WTRPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a control voltage range of 0.1V to 0.9V and operates b/w 0.00000318 MHz to 1 MHz, making it suitable for various frequency-controlled applications in automotive and industrial settings.
HMC512LP5
Analog Devices' HMC512LP5 is a VCO with 32 terminals, operating at frequencies from 9.6 to 10.8 GHz. It offers -110 dBc/Hz phase noise, output power of 3 dBm, and operates on a supply voltage range of 4.75-5.25V. Ideal for applications requiring precise frequency control in communication systems or radar equipment.
LTC6990IS6#PBF
LTC6990IS6#PBF by Analog Devices is a VCO with 6 terminals, operating from 2.25V to 5.5V. It features a digital tuned oscillator with frequencies ranging from 0.000488 MHz to 2 MHz. Ideal for applications requiring precise frequency control in compact designs with surface mounting feature.
LTC6992IDCB-3#TRMPBF
Analog Devices' LTC6992IDCB-3#TRMPBF is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
HMC1160LP5ETR
Analog Devices' HMC1160LP5ETR is a VCO with 5.25V max supply, 250 MHz/V modulation sensitivity, and -90 dBc/Hz phase noise. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 8.45-9.3 GHz, such as radar systems and communication equipment.
HMC416LP4ETR
Analog Devices' HMC416LP4ETR is a VCO with 24 terminals, operating from 2.75V to 3.25V, outputting at 4.5 dBm power. It offers -114 dBc/Hz phase noise, suitable for applications requiring precise voltage-controlled oscillation in the frequency range of 2750-3000 MHz. The compact PLASTIC/EPOXY package makes it ideal for surface mount installations in various electronic systems.
V585ME09-LF
Z-communications
V585ME09-LF by Z-communications is a VCO with Mod Sensitivity of 64 MHz/V, Output Power of 7 dBm, and Phase Noise at -100 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 950 MHz to 1750 MHz.
MAX2750EUA+T
Maxim Integrated
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 2500 MHz; Phase Noise: -125 dBc/Hz; Terminal Finish: MATTE TIN;
HMC509LP5ETR
Analog Devices' HMC509LP5ETR is a VCO with 10 dBm output power, -115 dBc/Hz phase noise, and operates b/w 7800-8800 MHz. It has a max supply voltage of 5.25 V and current of 270 mA. Ideal for applications requiring precise frequency control in compact designs.
HMC511LP5
HMC511LP5 by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 9050-10150 MHz. It features -115 dBc/Hz phase noise, 9 dBm output power, and operates on a 5V supply voltage. Ideal for applications requiring precise frequency control in communication systems.
HMC632LP5E
Analog Devices' HMC632LP5E VCO offers 4 dBm output power, -107 dBc/Hz phase noise, and operates b/w 14250-15650 MHz. Ideal for applications requiring precise frequency control in a compact 5.1mm x 5.1mm x 1.0mm package with a max supply voltage of 5.25V and current draw of up to 400 mA at temperatures ranging from -40 to +85°C.
LMX2604LQ
LMX2604LQ by Texas Instruments is a VCO with modulation sensitivity of 20 MHz/V, phase noise of -120 dBc/Hz, and output power of 4 dBm. It operates b/w 880-915 MHz frequencies and is ideal for applications requiring precise voltage-controlled oscillation in compact designs.
HMC507LP5
Analog Devices' HMC507LP5 is a VCO with 32 terminals, operating b/w 6650-7650 MHz. It offers -115 dBc/Hz phase noise, 11 dBm output power, and requires 4.75-5.25V supply voltage at max 270mA current. Ideal for applications requiring precise frequency control in compact designs.
HMC732LC4B
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Minimum Control Voltage: 0 V; Package Equivalence Code: LCC24,.16SQ,20; Offset Frequency: 10 kHz;
HMC515LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Offset Frequency: 100 kHz; Output Power: 6 dBm; Terminal Finish: Matte Tin (Sn);
MAX2751EUA-T
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Maximum Control Voltage: 2.4 V; Output Power: -3 dBm; Minimum Control Voltage: .4 V; Modulation Sensitivity: 175 MHz/V;
LTC6990HDCB#TRPBF
LTC6990HDCB#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, current of 0.283mA, and operating freq range from 0.000488 MHz to 2 MHz. Ideal for applications requiring digital tuned oscillators in compact designs with surface mounting feature.
HMC416LP4TR
Analog Devices' HMC416LP4TR is a VCO with 24 terminals, operating b/w 2.75-3.25V, outputting 4.5 dBm power at frequencies from 2750-3000 MHz. With -114 dBc/Hz phase noise and compact dimensions of 4.1mm x 4.1mm x 1.0mm, it's ideal for applications requiring precise voltage-controlled oscillation in a surface-mount package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved