Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Nominal Supply Voltage: 5 V; Offset Frequency: 100 kHz; Phase Noise: -116 dBc/Hz;
Median Price
$83.210
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$77.920
100+ parts
$60.703
1k+ parts
$41.190
10k+ parts
-
Mouser Electronics
DigiKey
$90.270
$70.446
Verical
Digiode
$76.124
Vyrian
J2 Sourcing AB
Parana Technologies
$0.382
$0.355
IDEA Electronic Components Group
$0.411
$0.390
DigiPath Technology Company
$0.641
$0.616
Semicontronic
$38.580
$37.616
$37.423
Corphita
$72.117
Authorized Procurement Solutions
Perfect Parts
VCO Voltage Controlled Oscillators HMC510LP5 attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Hittite Microwave
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
HMC510LP5 Oscillators trade compliance attributes, and parameters.
ECCN
3A001.A.11.B
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Brightking
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Telefunken
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
HMC583LP5E
Analog Devices
HMC583LP5E by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 11.5-12.8 GHz. It has a phase noise of -110 dBc/Hz and output power of 7 dBm, suitable for applications requiring precise frequency control in the GaAs technology field.
HMC584LP5TR
Analog Devices' HMC584LP5TR is a VCO with 5.25V max supply voltage, 380mA max supply current, and 7dBm output power. Ideal for applications requiring precise frequency control in the range of 12.5GHz to 13.9GHz, such as radar systems or communication equipment.
MAX2623EUA+TW
Maxim Integrated
VOLTAGE CONTROLLED OSCILLATOR; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
MAX2753EUA-T
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Minimum Control Voltage: .4 V; Maximum Supply Current: 13.5 mA; Minimum Operating Frequency: 2400 MHz; Additional Features: DIFFERENTIAL OUTPUT;
LTC6992IS6-4#TRMPBF
LTC6992IS6-4#TRMPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, suitable for applications requiring precise frequency control in compact designs like communication systems and test equipment.
LTC6992HS6-3#TRMPBF
LTC6992HS6-3#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz, and temp range of -40°C to 125°C. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
MAOC-009264-TR0500
TE Connectivity
TE Connectivity's MAOC-009264-TR0500 VCO offers 10.5 dBm output power, -90 dBc/Hz phase noise, and operates at 8800-9800 MHz frequencies. Ideal for applications requiring precise voltage-controlled oscillation in compact designs with a supply voltage of 5V.
LTC6990MPS6#TRPBF
LTC6990MPS6#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, current of 0.283mA, and operating frequency range from 0.000488 MHz to 2 MHz. Ideal for applications requiring digital tuned oscillators in compact designs with surface mounting feature.
SN74LS324J-00
Texas Instruments
VOLTAGE CONTROLLED OSCILLATOR;
LTC6990IS6#PBF
Linear Technology
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Operating Frequency: 2 MHz; Minimum Operating Frequency: .000488 MHz; JESD-609 Code: e3;
LTC6992IDCB-1#TRMPBF
Analog Devices' LTC6992IDCB-1#TRMPBF is a VCO with 6 terminals, operating from 2.25V to 5.5V, offering a frequency range of 0.00000318MHz to 1MHz. Ideal for applications requiring voltage-controlled oscillators in compact surface-mount packages.
LTC6992CDCB-2#TRMPBF
LTC6992CDCB-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs like communication systems and test equipment.
LTC6992MPS6-4#TRPBF
LTC6992MPS6-4#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V and current of 0.45mA. It operates b/w -55 °C to 125°C, offering control voltage range from 0.1V to 0.9V. Ideal for applications requiring precise frequency control in compact designs.
HMC515LP5ETR
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Supply Voltage: 5.25 V; Minimum Control Voltage: 2 V; JESD-609 Code: e3;
HMC584LP5E
Analog Devices' HMC584LP5E is a VCO with 32 terminals, operating at frequencies b/w 12.5-13.9 GHz. It features -110 dBc/Hz phase noise, 7 dBm output power, and operates on a 5V supply voltage. Ideal for applications requiring precise frequency control in compact designs.
HMC507LP5
Analog Devices' HMC507LP5 is a VCO with 32 terminals, operating b/w 6650-7650 MHz. It offers -115 dBc/Hz phase noise, 11 dBm output power, and requires 4.75-5.25V supply voltage at max 270mA current. Ideal for applications requiring precise frequency control in compact designs.
LTC6992CS6-3#TRMPBF
LTC6992CS6-3#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. It's a compact (2.9mm x 1.75mm x 1.0mm) surface mount device ideal for applications requiring precise voltage-controlled oscillation in limited space environments.
SN54LS324J-00
SMO1137VN
SMO1137VN by Onsemi is a VCO with modulation sensitivity of 1.7 MHz/V, output power of 10 dBm, and phase noise of -104 dBc/Hz. It operates at 11300 MHz frequency, ideal for applications requiring precise voltage-controlled oscillation in communication systems or radar equipment.
MTO-8950
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Minimum Control Voltage: 2.5 V; Minimum Operating Temperature: -54 Cel; Maximum Control Voltage: 15 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved