Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FREQUENCY QUADRUPLER; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 2450 MHz; Maximum Input Power (CW): 20 dBm; Construction: COMPONENT; Maximum Operating Frequency: 2800 MHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
BCID Electronics Ltd.
Digiode
Parana Technologies
$0.826
$0.768
IDEA Electronic Components Group
$0.888
$0.844
DigiPath Technology Company
$1.385
$1.330
Semicontronic
$3.000
$2.925
$2.910
AZTECH Wire
$13.110
One Stop Electronics
$21.000
Corphita
Perfect Parts
RF/Microwave Frequency Multipliers HMC443LP4TR attributes and parameters. Explore more RF/Microwave Frequency Multipliers devices from Hittite Microwave
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Starsea Electronics
4554
Jw Miller Magnetics
Other Semiconductors;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
934061034112
FREQUENCY DOUBLER; Minimum Operating Frequency: 40 MHz; Maximum Operating Frequency: 1000 MHz; Construction: MODULE;
HMC576LC3B
Analog Devices
Analog Devices' HMC576LC3B is a GaAs RF frequency doubler with 12 terminals, operating from 9-14500 MHz. It has a max input power of 13 dBm, suitable for RF/Microwave applications requiring surface mount packaging and a characteristic impedance of 50 ohms.
AMMP-6120
Broadcom
FREQUENCY DOUBLER; Minimum Operating Frequency: 4000 MHz; Maximum Operating Frequency: 12000 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 5 dBm; Construction: COMPONENT;
HMC578LC3BTR
Hittite Microwave
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Technology: PHEMT; Construction: COMPONENT; Maximum Voltage Standing Wave Ratio: 1.67;
HMC444LP4
Analog Devices' HMC444LP4 is a RF/Microwave Frequency Multiplier with 20 dBm CW input power, operating from -40 to 85°C. It functions as a Frequency Quadrupler, supporting frequencies from 9900 to 11200 MHz. Ideal for applications requiring high-frequency multiplication in various electronic systems.
HMC187AMS8E
HMC187AMS8E by Analog Devices is a RF/Microwave Frequency Multiplier with GaAs technology. It operates from 850 MHz to 2000 MHz, offering a max conversion loss of 18 dB and can handle up to 27 dBm CW input power. This component is ideal for frequency doubling applications in various electronic systems.
CGD1044H
FREQUENCY DOUBLER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Maximum Supply Current: 470 mA; Package Equivalence Code: SOT-115J; Minimum Operating Temperature: -20 Cel;
HMC204
Analog Devices' HMC204 is a RF/Microwave Frequency Multiplier with max input power of 27 dBm. It operates b/w -55°C to 85°C, doubling frequencies from 4 GHz to 8 GHz. Ideal for applications requiring high conversion efficiency and gold terminal finish for reliable performance.
HMC695LP4
Analog Devices' HMC695LP4 is a RF/Microwave Frequency Quadrupler with 50 ohm impedance, operating from 2850 MHz to 3300 MHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to 85°C. Ideal for applications requiring frequency multiplication in RF/microwave systems.
AMMP-6125-TR1G
FREQUENCY DOUBLER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Construction: COMPONENT;
HMC695LP4TR
Analog Devices' HMC695LP4TR is a RF/Microwave Frequency Multiplier with 24 terminals, operating at 5V. It features GaAs technology, quad-rupling frequency and has a max supply current of 75mA. Ideal for surface mount applications in temperature range -40 to 85 °C.
HMC331
Analog Devices' HMC331 is a RF/Microwave Frequency Doubler with 12000-18000 MHz frequency range, 20 dB max conversion loss, and 27 dBm CW input power. It operates b/w -55 to 85°C, has gold terminal finish, and suits applications requiring high-frequency signal multiplication.
HMC916LP3E
HMC916LP3E by Analog Devices is a RF/Microwave Frequency Tripler with 50 ohm impedance, operating from 2660 MHz to 5330 MHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to +85°C. Ideal for applications requiring frequency multiplication in RF/microwave systems.
AMT-401X2-33
FREQUENCY DOUBLER; Maximum Input Power (CW): 10 dBm; Minimum Operating Frequency: 13250 MHz; Construction: MODULE; Maximum Operating Frequency: 20000 MHz;
HMC695LP4E
Analog Devices' HMC695LP4E is a RF/Microwave Frequency Multiplier with max input power of 20 dBm. Operating b/w -40 to 85 °C, it quadruples frequencies from 2850 MHz to 3300 MHz. Ideal for applications requiring high frequency multiplication in components.
AMMC-6120-W10
FREQUENCY DOUBLER; Maximum Operating Frequency: 20000 MHz; Maximum Supply Current: 105 mA; Power Supplies (V): 4.5; Maximum Input Power (CW): 15 dBm; Characteristic Impedance: 50 ohm;
HMC189AMS8TR
Analog Devices' HMC189AMS8TR is a RF/Microwave Frequency Multiplier with 50 ohm impedance. It operates b/w -40 °C to 85°C, doubling frequencies from 2000 MHz to 4000 MHz with a conversion loss of up to 17 dB. Ideal for applications requiring frequency multiplication in various temperature conditions.
HMC575LP4TR
Analog Devices' HMC575LP4TR is a GaAs technology RF frequency doubler with 24 terminals. It operates b/w -40 °C to 85°C, powered by 5V supply. This surface-mount device is ideal for RF/microwave applications requiring frequency multiplication.
HMC8342LS6TR
Analog Devices' HMC8342LS6TR is a RF/Microwave Frequency Multiplier with GaAs technology. It operates from 11-21 GHz, doubling input frequency. With 16 terminals and max CW power of 10 dBm, it's ideal for applications requiring high-frequency signal multiplication in a compact surface-mount package.
HMC942LP4ETR
Analog Devices' HMC942LP4ETR is a GaAs RF/Microwave Frequency Doubler with 24 terminals, operating from -40 to 85 °C. It requires a 4.5V power supply and draws a max current of 240mA. Ideal for surface mount applications in frequency multiplication circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved