Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Technology: BIPOLAR; JESD-609 Code: e0; Power Supplies (V): 3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Ampacity Inc.
$2.010
Parana Technologies
$2.039
$1.896
IDEA Electronic Components Group
$2.192
$2.082
DigiPath Technology Company
$3.420
$3.283
AZTECH Wire
$3.890
$3.740
$3.660
$3.590
Semicontronic
$4.010
$3.910
One Stop Electronics
$5.010
Corphita
VCO Voltage Controlled Oscillators HMC430LP4 attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Hittite Microwave
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Package Body Material:
Package Equivalence Code:
Phase Noise:
Physical Dimension:
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Technology:
Terminal Finish:
HMC430LP4 Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Weitronic Enterprise
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
SN74LS325J-00
Voltage Controlled Oscillators;
HMC1161LP5E
Analog Devices
Analog Devices' HMC1161LP5E is a VCO with 5.25V max supply voltage, 250 MHz/V modulation sensitivity, and 300mA max supply current. Ideal for applications requiring a compact VCO with -90 dBc/Hz phase noise, operating b/w 8710-9550MHz in surface mount setups.
HMC6380LC4B
Analog Devices' HMC6380LC4B VCO operates at 8-16 GHz with -50 dBc/Hz phase noise, 600 MHz/V modulation sensitivity, and 6 dBm output power. Ideal for applications requiring precise frequency control in a compact 4.05mm x 1.2mm package.
SN74LS324J-00
VOLTAGE CONTROLLED OSCILLATOR;
LTC6992IDCB-2#TRMPBF
LTC6992IDCB-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes 0.45mA max current. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
HMC531LP5TR
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Control Voltage: 2 V; Maximum Control Voltage: 13 V;
HMC431LP4E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Maximum Supply Current: 27 mA; Phase Noise: -102 dBc/Hz; Nominal Supply Voltage: 3 V;
LMX2604LQX
LMX2604LQX by Texas Instruments is a VCO with modulation sensitivity of 20 MHz/V, output power of 4 dBm, and phase noise of -120 dBc/Hz. It operates b/w 880-915 MHz, ideal for applications requiring precise frequency control in compact designs.
HMC430LP4E
Analog Devices' HMC430LP4E is a 24-terminal VCO with -103 dBc/Hz phase noise, operating at 5-5.5 GHz range. It features a 3V supply voltage, -1 dBm output power, and 27 mA max current draw. Ideal for applications requiring precise frequency control in compact designs.
HMC1168LP5E
Analog Devices' HMC1168LP5E VCO offers 350 MHz/V modulation sensitivity, -85 dBc/Hz phase noise, and 10 dBm output power. Ideal for applications requiring precise frequency control in the range of 12.47-13.72 GHz, with a compact size of 5.1mm x 5.1mm x 1.0mm for surface mount installations.
HMC511LP5E
HMC511LP5E by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 9050-10150 MHz. It features a GaAs technology, -115 dBc/Hz phase noise, and 9 dBm output power. Ideal for applications requiring precise frequency control in temperature ranges from -40 to 85°C.
VTO-8080
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Power Variation: 1.5 dB; Minimum Operating Temperature: 0 Cel; Physical Dimension: 12.7mm x 4.572mm; Nominal Supply Voltage: 15 V;
CLV0986E-LF
Z-communications
CLV0986E-LF by Z-communications is a VCO with Mod Sensitivity of 18 MHz/V, Output Power of 0 dBm, and Phase Noise at -113 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 971 MHz to 1002 MHz. It operates on a Nominal Voltage of 5 V with low supply current at 24 mA.
HMC1165LP5ETR
Analog Devices' HMC1165LP5ETR is a VCO with 32 terminals, operating b/w -40 °C to 85°C. It offers modulation sensitivity of 310 MHz/V, output power of 8 dBm, and phase noise at -88 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 11.07 GHz to 11.62 GHz.
SN74LS624JP4
MAX2751EUA+T
Analog Devices' MAX2751EUA+T is a VCO with Mod Sensitivity of 175 MHz/V, -125 dBc/Hz Phase Noise, and -3 dBm Output Power. Ideal for applications requiring precise frequency control in the range of 2120-2260 MHz.
MAX2752EUA+
Analog Devices' MAX2752EUA+ is a VCO with Mod Sensitivity of 170 MHz/V, -125 dBc/Hz Phase Noise, and -3 dBm Output Power. Ideal for applications requiring precise frequency control in the range of 2025-2165 MHz, such as wireless communication systems.
TLC2940IPWR
TLC2940IPWR by Texas Instruments is a VCO with max supply voltage of 3.15V, operating freq of 50MHz, and CMOS technology. Ideal for applications requiring voltage-controlled oscillators in compact designs due to its small physical dimensions and surface mounting feature.
HMC535LP4ETR
Analog Devices' HMC535LP4ETR is a VCO with 590 MHz/V modulation sensitivity, -110 dBc/Hz phase noise, and 6 dBm output power. Ideal for applications requiring precise frequency control in the 14.7-15.4 GHz range, such as radar systems and satellite communications.
HMC431LP4
Analog Devices' HMC431LP4 is a VCO with -102 dBc/Hz phase noise, 27 mA supply current, and 3V nominal voltage. Ideal for applications requiring precise frequency control in the 5500-6100 MHz range. With compact dimensions of 4.1mm x 4.1mm x 1.0mm, it's suitable for surface mount installations in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved