Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED; Maximum Operating Frequency: 4500 MHz; Construction: COMPONENT; Maximum Conversion Loss: 11 dB; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Ampacity Inc.
$2.000
Parana Technologies
$2.499
$2.324
IDEA Electronic Components Group
$2.687
$2.553
DigiPath Technology Company
$4.192
$4.024
AZTECH Wire
$14.832
One Stop Electronics
$20.000
Semicontronic
$31.000
$30.225
$30.070
Authorized Procurement Solutions
Kepictronics
QUARKTWIN TECHNOLOGY LTD
RC Electronics
Corphita
RF/Microwave Mixers HMC175MS8E attributes and parameters. Explore more RF/Microwave Mixers devices from Hittite Microwave
Characteristic Impedance:
Construction:
Maximum Conversion Loss:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC175MS8E RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Bytesonic Electronics
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
Db Lectro
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
PMB2210T
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 70 Cel;
SKY-60
Mini-circuits
SKY-60 by Mini-circuits is a RF/Microwave Mixer with max input power of 17 dBm and VSWR of 1.79. It operates from 2500 MHz to 6000 MHz, ideal for double balanced applications in temperatures ranging from -40°C to 85°C. The surface mount package with tin/lead finish makes it suitable for various component constructions.
CMY210E6327
Infineon Technologies' CMY210E6327 is a RF/Microwave Mixer with 10 dBm CW input power, 50 ohm impedance, and operates from 500-2500 MHz. It is a double balanced component ideal for various RF applications.
L64733B
Broadcom
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 48; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb); Package Equivalence Code: TQFP48,.35SQ;
HMC129
Analog Devices
Analog Devices' HMC129 is a GaAs RF/Microwave Mixer with double balanced technology. It operates from -55°C to 85°C, covering frequencies from 4 GHz to 8 GHz. With a low conversion loss of 9 dB and characteristic impedance of 50 ohm, it's ideal for high-frequency applications.
HMC208AMS8ETR
HMC208AMS8ETR by Analog Devices is a RF/Microwave Mixer with 8 terminals, operating frequency range of 700-2000 MHz, and max conversion loss of 10.5 dB. It is constructed using GaAs technology for high performance in applications requiring double balanced mixers such as wireless communication systems.
AD8343ARU-REEL7
AD8343ARU-REEL7 by Analog Devices is a RF/Microwave Mixer with 14 terminals, operating from -40 to 85°C. It has a VSWR of 2, operates at frequencies up to 2500 MHz, and requires a 5V power supply. Ideal for applications requiring double balanced mixers in the RF/microwave domain.
IAM-93516-TR2
TRIPLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 400 MHz;
HMC798LC4TR
Analog Devices' HMC798LC4TR is a ceramic RF mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply and draws a max current of 125mA. Ideal for RF applications, this double balanced mixer is surface mountable for easy integration in various systems.
HMC130
Analog Devices' HMC130 is a GAAS double balanced RF mixer with 50 ohm impedance. It operates from -55°C to 85°C, covering frequencies from 6 GHz to 11 GHz. Ideal for RF/microwave applications requiring low conversion loss and gold terminal finish for high performance.
HMC1042LC4
Analog Devices' HMC1042LC4 is an RF/Microwave Mixer with 18 dBm CW input power, 14 dB conversion loss, and 50 ohm impedance. Ideal for applications requiring image rejection, it operates b/w 15-33.5 GHz with a temperature range of -40 to +85°C.
HMC774ALC3B
Analog Devices' HMC774ALC3B is a RF/Microwave Mixer with 50 ohm impedance, 15.5 dB max conversion loss, and 21 dBm CW input power. It operates b/w -40°C to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 7-34 GHz.
HMC1056LP4BE
Hittite Microwave
IMAGE REJECTION; Maximum Operating Frequency: 12000 MHz; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Conversion Loss: 11 dB; Construction: COMPONENT;
HMC329A-SX
Analog Devices' HMC329A-SX is a RF/Microwave Mixer with 50 ohm impedance, 14.5 dB conversion loss, and 18 dBm CW input power. It operates b/w -55 °C to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 22-38 GHz.
ADE-1LHW
ADE-1LHW by Mini-circuits is a RF/Microwave Mixer with max input power of 17 dBm and VSWR of 1.87. It operates from -20°C to 85°C, ideal for applications requiring double balanced mixers in the frequency range of 2 MHz to 750 MHz.
LRMS-30J+
LRMS-30J+ by Mini-circuits is a ceramic RF/Microwave Mixer with 6 terminals. It operates from -40 to 85°C, has a max input power of 17 dBm, and VSWR of 6.26. Ideal for applications requiring double balanced mixers in the frequency range of 200 MHz to 3 GHz.
HMC339
Analog Devices' HMC339 is a RF/Microwave Mixer with 50 ohm impedance, operating from 33-42 GHz. It offers a max conversion loss of 13 dB and can handle up to 13 dBm CW input power. Ideal for applications requiring high-frequency signal mixing in environments ranging from -55°C to 85°C.
HMC260ALC3BTR-R5
Analog Devices' HMC260ALC3BTR-R5 is a RF/Microwave Mixer with 12 terminals, operating from -40 to 85 °C. It features a GaAs technology, double balanced design, and can handle up to 27 dBm CW input power. Ideal for applications requiring high frequency conversion with low loss in surface mount configurations.
HMC260A
Analog Devices' HMC260A is a RF/Microwave Mixer with 25 dBm CW input power, 85 °C max temp, -55°C min temp. It's a double balanced component with 50Ω impedance, 12 dB conversion loss, operating from 10-26 GHz. Ideal for high-frequency applications in communications and radar systems.
ADRF6604ACPZ-R7
Analog Devices' ADRF6604ACPZ-R7 is a RF/Microwave Mixer with 40 terminals, operating at 2500-2900 MHz. It features BICMOS technology, double balanced design, and operates b/w -40 to 85 °C. Ideal for applications requiring high-frequency signal mixing in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved