Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
Median Price
$22.670
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$15.202
100+ parts
-
1k+ parts
10k+ parts
Verical
$15.420
Chip1Stop
$18.200
$15.600
$13.800
$13.700
Farnell
$18.800
$13.520
$12.970
Interstate Connecting
$22.222
$17.391
Sager
$19.430
$17.000
Mouser Electronics
$23.840
$17.680
$17.150
DigiKey
$24.470
$17.682
$15.786
Master Electronics
$26.060
$16.630
$15.220
Newark
$27.120
$21.220
Element14
$31.280
$22.590
$20.220
TME
$21.390
$16.380
IBS Electronics
$37.135
$23.698
$21.688
Chip Stock
Nova Conductors
Ampacity Inc.
$10.090
Corohmni
$10.407
Continental Prestige Electronics
$15.480
$10.880
Authorized Procurement Solutions
Lixinc
Argo Parts USA
Netroflash
Perfect Parts
Other Function Circular Connectors LF10WBP-12P(31) attributes and parameters. Explore more Other Function Circular Connectors devices from Hirose Electric
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
JESD-609 Code:
LF10WBP-12P(31) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Yangzhou Yangjie Electronics
MICRODIODE ELECTRONICS SHENZHEN CO LTD
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Daco Semiconductor
Tak Cheong Electronics Holdings
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
1440669
Phoenix Contact
CIRCULAR CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD OVER NICKEL;
21031112405
Harting Electronics & Kg
The Harting Electronics & Kg 21031112405 is a threaded circular connector with gold contact finish. Featuring 4 contacts, it is designed for cable mounting applications. The solid backshell and screw termination make it ideal for female contact gender requirements.
EGN.0M.305.XLM
Lemo Usa
EGN.0M.305.XLM by Lemo Usa is a threaded circular connector with 5 contacts, solid backshell, fluid/vibration resistance, aluminum alloy shell, crimp termination, and female contact gender. Ideal for cable and panel mounting applications requiring reliable connectivity in harsh environments.
UTG0103S
Esterline Technologies
CIRCULAR CONNECTOR; Manufacturer Series: UTG;
21033193501
CIRCULAR CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
1300170015
Molex
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1436974
Phoenix Contact 1436974 is a circular connector with 0.65" body diameter, gold termination finish, and polyamide66 insulator. It operates b/w -25°C to 85°C, suitable for environment-resistant applications. With threaded coupling and solder termination, it has 8 contacts for board and panel mounting.
SJS830100P
Amphenol
CIRCULAR CONNECTOR;
1662528
Phoenix Contact 1662528 is a SNAP circular connector with POLYAMIDE insulator. Featuring 4 contacts, it has a SOLID backshell and SCREW termination. Ideal for CABLE mounting applications requiring reliable MALE connectors in PLUG body style.
1419645
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
T4140012051-000
TE Connectivity
TE Connectivity's T4140012051-000 is a circular connector with 5 contacts, rated at 4A and 60V. It features preassembled male contacts, nickel finish, and brass shell material. Ideal for board mounting applications requiring polarized connectors with solder termination.
HDP26-24-21SE-L017
TE Connectivity's HDP26-24-21SE-L017 is a circular connector with 21 contacts, rated at 250V and 25A. Made of glass-filled polyamide, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell for cable mounting.
15544899
Aptiv
7000-12060-6260500
Murrelektronik
FGC.0B.304.CLAD42Z
5-2399609-1
TE Connectivity 5-2399609-1 is a circular connector with rated voltage of 1000V and max operating temp of 140°C. It has UL flammability rating of 94V-0, suitable for applications requiring high current signal up to 500A. With male contact gender and round pin socket style, it is ideal for panel mounting in various industrial settings.
HD10-9-1939PE-P080
TE Connectivity's HD10-9-1939PE-P080 is a circular connector with 1.66"x1.437"x1.437" dimensions, GLASS FILLED POLYAMIDE insulator, and 250V rated voltage. It has 9 contacts, UL certification, and operates b/w -55°C to 125°C. Ideal for applications requiring a polarized housing, this connector supports a max current of 13A in male gender configuration with strain relief mounting option on panels.
T4110401051-000
TE Connectivity's T4110401051-000 is a threaded circular connector with 5 contacts, rated for 60V and 4A. Made of polybutylene terephthalate, it operates b/w -40 to 85°C. Ideal for applications requiring durable female receptacles with round pin sockets in a shell size of 20.
T4111002051-000
TE Connectivity's T4111002051-000 is a threaded circular connector with 5 contacts, rated for 60V and 4A. Made of polybutylene terephthalate, it operates b/w -40°C to 85°C. Ideal for applications requiring durable male plug connectors with polarization key and shell size of 20.
796094-2
TE Connectivity 796094-2 is a threaded circular connector with 600V rated voltage. Made of polyamide, it operates b/w -55 to 105°C. Ideal for immersion-resistant applications, this female connector has 4 contacts and a UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LF10WBJ-4S
Hirose Electric
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Shell Finish: NICKEL; Mating Contact Finish: NOT SPECIFIED; Backshell Type: SOLID;
LF10WBP-12S(31)
LF10WBP-12S(31) by Hirose Electric is a 12-contact circular connector with gold contact finish, bayonet coupling, and nickel shell finish. It is waterproof, suitable for cable mounting applications in zinc alloy shells. Ideal for female contacts in plug-style bodies, size 10 shells offer reliable solder termination.
LF10WBR-4S
LF10WBR-4S by Hirose Electric is a waterproof circular connector with 4 gold-finished contacts. Featuring a threaded coupling type and nickel shell finish, it is ideal for cable mounting applications. With a zinc alloy shell material and female contact gender, this receptacle connector has a solid backshell design and uses crimp termination.
LF10WBRB-12S
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Shell Finish: NICKEL; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
LF10WBJ-12S
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Shell Material: ZINC ALLOY;
LF10WBP-12P
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Coupling Type: THREADED; Shell Size: 10; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LF10WBP-12S
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Empty Shell: NO; Backshell Type: SOLID; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LF10WBP-4P
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Mixed Contacts: NO; Empty Shell: NO; Backshell Type: SOLID;
LF10WBP-4S
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; IEC Conformity: NO; Total No. of Contacts: 4; Shell Material: ZINC ALLOY;
LF10WBPD-12P
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: NO;
LF10WBPD-12S
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Backshell Type: SOLID; Total No. of Contacts: 12; Termination Type: CRIMP;
LF10WBPD-4P
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: GOLD; Mixed Contacts: NO;
LF10WBPD-4S
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Termination Type: CRIMP; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Shell Size: 10;
LF10WBRB-12PD
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; Shell Finish: NICKEL; Coupling Type: THREADED; Shell Size: 10;
LF10WBP-4S(03)
CIRCULAR CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD; Mating Contact Finish: NOT SPECIFIED;
LF10WBP-4S(31)
CIRCULAR CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;
LF10WBPD-12P(31)
CIRCULAR CONNECTOR; Termination Contact Finish: Gold (Au); Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;
LF10WBPD-12S(31)
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: GOLD;
LF10WBPD-4P(31)
CIRCULAR CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
LF10WBPD-4S(31)
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved