Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 28 deg; JESD-609 Code: e0; Maximum Reverse Voltage: 5 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
ComSIT USA
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT Distribution GmbH
Vyrian
Digiode
Nova Conductors
Decca Corp
$9.000
$8.820
$8.732
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Eastek
$0.960
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Aranea Global
Supply Digital
Corphita
Visible LEDs HLMT-QL00 attributes and parameters. Explore more Visible LEDs devices from Hewlett Packard
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
T-code:
Terminal Finish:
Viewing Angle:
HLMT-QL00 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
HP, Inc. engages in the provision of personal computing and other access devices, imaging and printing products, and related technologies, solutions, and services. It operates through the following business segments: Personal Systems, Printing, and Corporate Investments. The Personal Systems segment offers commercial and consumer desktop and notebook personal computers, workstations, thin clients, commercial tablets and mobility devices, retail point-of-sale systems, displays and other related accessories, software, support, and services for the commercial and consumer markets. The Printing segment provides consumer and commercial printer hardware, supplies, solutions and services, and scanning devices. The Corporate Investments segment includes HP Labs and certain business incubation projects. The company was founded by William R. Hewlett and David Packard in 1939 and is headquartered in Palo Alto, CA.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Taiwan Semiconductor
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Diotec Electronics
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
HSMF-C113
Broadcom
HSMF-C113 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/570/468 nm. With a size of 2.1 mm and max forward current of 0.02 A, it's ideal for surface mount applications requiring red/green/blue illumination at a viewing angle of 120°.
KP-2012EC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: WATER CLEAR; Color: HIGH EFFICIENCY RED;
LTST-C190KRKT
Lite-on Technology
LTST-C190KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm. It has a max forward current of 0.025A and viewing angle of 260°, making it ideal for surface mount applications in various electronic devices. With a water clear lens type and red color, this LED operates b/w -30°C to 85°C temperature range.
OVS-0801
SPC TECHNOLOGY/ MULTICOMP
OVS-0801 by Spc Technology/Multicomp is a 1.4mm SINGLE COLOR LED with WATER CLEAR lens, emitting WHITE light at 400.0mcd intensity. Ideal for surface mount applications, it operates b/w -30 to 80°C, drawing 0.03A current with a wide 140° viewing angle.
HSMW-C265
Agilent Technologies
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 3.9 V; JESD-609 Code: e0;
156125BS75000
Wuerth Elektronik & Kg
Wurth Elektronik's 156125BS75000 is a 1.2mm BLUE LED with peak wavelength of 465nm, forward current of 0.02A, and luminous intensity of 0.045cd. Ideal for surface mount applications in electronics due to its water clear lens and square shape, offering a wide viewing angle of 140°.
HLMP-3401
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C190TBKT-10A
SINGLE COLOR LED;
SML-LX1206GC-TR
Lumex
SML-LX1206GC-TR by Lumex is a 2mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.025A and forward voltage of 2.8V, suitable for surface mount applications in electronics, signage, and indicator lights due to its water clear lens and green color at wavelength.
HSMS-C150
HSMS-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light, with a viewing angle of 170° and surface mounting feature.
521-9628F
Dialight
Dialight's 521-9628F is a 3mm dual color LED with red/green colors, peak wavelengths of 660/565nm, and max forward current of 0.04A. Commonly used in indicator lights for electronics due to its radial mount feature and bulk packing method.
KPT-2012CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Packing Method: TR;
LHR974
Osram Opto Semiconductors
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: Tin (Sn);
3036
Microprecision Electronics Sa
HSMH-C150
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 11.65; Lens Type: DIFFUSED; Terminal Pitch: 2.7 mm;
HLMP-3962
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 14.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
564-0200-222F
Dialight's 564-0200-222F is a 3mm single color LED array with separate, 3-element configuration. It has a peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
553-0133F
Dialight's 553-0133F is a 3mm yellow LED array with 2 separate elements. It has a peak wavelength of 585nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for applications requiring a single color light source with radial mounting in electronics or signaling devices.
HSMF-C155
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/15.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
MLCAWT-A1-0000-000X51
Wolfspeed
Wolfspeed's MLCAWT-A1-0000-000X51 is a single color LED with max forward current of 0.35A and height of 1.2mm. It operates at up to 150°C, emitting white light with min luminous intensity of 120cd. Ideal for applications requiring high brightness in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLMT-QL00-T0011
Broadcom's HLMT-QL00-T0011 is a 1.78mm SINGLE COLOR LED with peak wavelength of 590nm, ideal for applications requiring amber light. With max forward current of 0.05A and viewing angle of 15°, it operates b/w -40 to 100 °C, making it suitable for surface mount configurations.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1000.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMT-QH00
SINGLE COLOR LED; Lens Type: TRANSPARENT; Terminal Finish: Tin (Sn); JESD-609 Code: e3; No. of Functions: 1; Shape: ROUND;
SINGLE COLOR LED; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Orange/Red; T-code: T-3/4; Maximum Reverse Voltage: 5 V;
SINGLE COLOR LED; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Color: REDDISH ORANGE; Viewing Angle: 28 deg;
HLMT-PL00-P0W11
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: AXIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: TIN;
HLMT-PH00-P0011
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: MATTE TIN;
HLMT-QL00
SINGLE COLOR LED; Lens Type: TRANSPARENT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; Maximum Operating Temperature: 100 Cel; Height: 2.9 mm;
SINGLE COLOR LED; Lens Type: TRANSPARENT; Terminal Finish: TIN; Maximum Operating Temperature: 100 Cel; Size: 1.78 mm; Height: 2.9 mm;
HLMT-PG00-N0012
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Lens Type: UNTINTED NONDIFFUSED; Configuration: SINGLE; Packing Method: BULK;
HLMT-DH00-OPTION-002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1800; Lens Type: UNTINTED NONDIFFUSED; Shape: ROUND;
HLMT-PG00-N0014
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Lens Type: UNTINTED NONDIFFUSED; Minimum Operating Temperature: -40 Cel; Viewing Angle: 125 deg;
HLMT-PG00-N0021
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Lens Type: UNTINTED NONDIFFUSED; No. of Functions: 1; Peak Wavelength (nm): 622;
HLMT-CL00-OPTION-001
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8300; Lens Type: UNTINTED NONDIFFUSED; Peak Wavelength (nm): 594;
HLMT-DH00-OPTION-007
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1800; Lens Type: UNTINTED NONDIFFUSED; Height: 8.81 mm;
HLMT-PG00-N0022
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Lens Type: UNTINTED NONDIFFUSED; Minimum Operating Temperature: -40 Cel; No. of Functions: 1;
HLMT-PG00-N0024
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Lens Type: UNTINTED NONDIFFUSED; Configuration: SINGLE; Shape: ROUND;
HLMT-QL00-T0012
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved