Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Output Circuit Type: SCR; Control Voltage: 90 V; Input Type: AC; No. of Elements: 3;
Median Price
$315.020
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
< 1k
Verical
1+ parts
$273.021
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$297.330
DigiKey
RS (Exports)
$321.320
$289.190
Newark
$430.880
$304.400
TodayComponents
$208.490
$169.520
Galco
$283.170
Nova Conductors
$284.840
Electro Sonic
$285.950
$263.210
IBS Electronics
$310.542
$292.323
Vyrian
Aztec Data Supply Inc.
$0.612
Corohmni
$0.636
AZTECH Wire
$6.408
Aranea Global
$279.143
$267.977
Allen Electronics Distributors
Continental Prestige Electronics
Neutron USA
$439.740
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Solid State Relays A53TP50D-10 attributes and parameters. Explore more Solid State Relays devices from Hbcontrols
Additional Features:
Configuration:
Control Current:
Control Voltage:
Maximum Forward Current:
Input Type:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Output Circuit Type:
Height:
Length:
A53TP50D-10 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
At HBControls, we’re dedicated to simplifying the lives of our customers by providing a wide range of standard and customized, eco-friendly, high-quality power controllers and solid-state relays to meet the needs of a diverse industrial market. Above all, our goal is to provide an exceptional customer-service experience, because we understand what really matters – the people that purchase and use our products. It’s our business to take care of their business. As an expert in designing and manufacturing solid-state power controllers, we understand the importance of effectively managing heat in order to maximize product reliability and life expectancy. Our power controllers and solid-state relays utilize highly efficient, custom-designed heat sinks to ensure that critical components remain well within specified parameters, allowing for safe, reliable operation in harsh ambient environments. Typical single-phase and multi-phase power controller ratings range from 0 – 100 amps in a 40°C ambient and include simple on/off switching as well as microprocessor-based phase-angle or burst fire (time proportioned) control. Moreover, with life expectancies greater than 7 million hours (>800 years), our power controllers outlive by far the equipment in which they are installed. This makes them an ideal, eco-friendly alternative to traditional mechanical or mercury contactors since they minimize electronic waste and reduce environmental contaminants. We also still appreciate and enjoy the personal touch. Our customer-base ranges from some of the world’s largest industrial and automation companies to the novice engineer working out of their garage. We look forward to supporting them all. HBControls has specialized in the industry since the 1980’s and our team of engineers look forward to the opportunity to help whenever and wherever they can. With a broad range of standard products, technical expertise and support, custom-design capabilities and same-day shipping on most products, we’re here to help you succeed.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Surge Components
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitronics
G3VM-62F1
Omron
Omron's G3VM-62F1 is a solid state relay with 2 separate elements, max. forward current of 0.025A, and transistor output SSR type. It operates b/w -20°C to 65°C, has max. isolation voltage of 2500V, on-state resistance of 2 ohm, and can handle max. current of 0.5A. Ideal for applications requiring precise control in industrial automation systems.
EL240A5-05
Crydom
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel; Maximum Isolation Voltage: 3750 V; Additional Features: UL RECOGNIZED; No. of Elements: 1;
AQZ204D
Aromat
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Input Type: DC; Minimum Operating Temperature: -40 Cel; Length: 21 mm;
LH1518AABT&R
At & T Microelectronics
LH1518AABT&R by At & T Microelectronics is a SINGLE solid state relay with TRANSISTOR OUTPUT SSR. It has a max forward current of 0.05 A, on-state resistance of 20 ohm, and isolation voltage of 3750 V. Ideal for applications requiring reliable switching in temperatures ranging from -40 to 85 °C.
AQY212EHAX
Panasonic
Panasonic AQY212EHAX is a SINGLE Solid State Relay with 0.03 A Control Current and 0.05 A Max Forward Current. It features MOSFET Output Circuit Type, 2.5 ohm Max On State Resistance, and 5000 V Max Isolation Voltage. Ideal for applications requiring precise control in compact spaces with AC/DC Input Type and Surface mounting Feature.
CPC1966YX8
Littelfuse
TRIGGER OUTPUT SSR; Terminal Finish: TIN; JESD-609 Code: e3;
CPC1018N
IXYS Corporation
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum On State Resistance: .8 ohm; JESD-609 Code: e3; Maximum On State Current: .6 A; Maximum Operating Temperature: 85 Cel;
CMX60D10
The Crydom CMX60D10 is a single solid state relay with built-in resistor, featuring a max on-state current of 10A and resistance of 0.018 ohm. It operates b/w -30°C to 80°C, with an isolation voltage of 2500V. Ideal for applications requiring reliable switching in industrial automation systems.
G3MB-202PLEG-4-DC20MA
Omron's G3MB-202PLEG-4-DC20MA is a SINGLE Solid State Relay with 2A On State Current, 0.02A Forward Current, and 2500V Isolation Voltage. Ideal for triggering output SSR applications in temperatures ranging from -30°C to 80°C.
ASSR-1228-502E
Broadcom
Broadcom's ASSR-1228-502E is a solid state relay with separate, 2-element configuration. It features a control current of 0.003 A and max forward current of 0.02 A. Ideal for applications requiring low on-state resistance and high isolation voltage up to 3750 V.
ODC-24
TE Connectivity
TE Connectivity's ODC-24 is a 24V DC solid state relay with a max output voltage of 60V. With a compact size of 43.1x31.7x15.2 mm, it is ideal for panel mounting applications in environments ranging from -30 to 80°C. Featuring a transistor output circuit type, this optoelectronic device operates within a supply voltage range of 18-32V, making it suitable for various industrial control systems.
AQW282SX
Solid State Relays; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Length: 9.37 mm; Output Circuit Type: MOSFET; Control Voltage: 1.14 V;
SPFE240D25
Hbcontrols
TRIGGER OUTPUT SSR; Maximum On State Current: 10 A; Minimum Operating Temperature: -30 Cel; No. of Elements: 1; Maximum Isolation Voltage: 4000 V; Maximum Operating Temperature: 80 Cel;
LH1522AAC
Lucent Technologies
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; No. of Elements: 2; Output Circuit Type: MOSFET; Input Type: DC;
CPC1918J
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Maximum On State Current: 5.25 A;
DC100D100C
Sensata Technologies
TRANSISTOR OUTPUT SSR; Maximum On State Current: 100 A; Maximum Isolation Voltage: 2500 V; Additional Features: UL RECOGNIZED; Maximum On State Resistance: .0056 ohm; Maximum Forward Current: .012 A;
G3VM-61QR2(TR05)
TRANSISTOR OUTPUT SSR;
SPF240D25
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 4000 V; Additional Features: UL APPROVED; Minimum Operating Temperature: -30 Cel; No. of Elements: 1; Maximum Operating Temperature: 80 Cel;
D2425
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum On State Current: 25 A; Configuration: SINGLE; Length: 57.3 mm; Control Voltage: 3 V;
LCA110LSTR
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum On State Current: .12 A; Output Circuit Type: MOSFET; Packing Method: TR; Maximum Isolation Voltage: 3750 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A53TP50D-10
TRIGGER OUTPUT SSR; Control Voltage: 90 V; Minimum Operating Temperature: -40 Cel; Length: 104 mm; Input Type: AC; Additional Features: UL RECOGNIZED;
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Control Voltage: 90 V; No. of Elements: 3; Maximum Forward Current: .01 A; Additional Features: UL RECOGNIZED;
A53TP50D
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Output Circuit Type: SCR; Control Voltage: 90 V; Height: 30 mm; Maximum Forward Current: .01 A;
Sensitron Semiconductor
A53TP50D by Sensitron Semiconductor is a TRIGGER OUTPUT SSR with 50A max on-state current and 4000V isolation voltage. It operates b/w -40°C to 125°C, making it suitable for industrial automation, power distribution, and motor control applications.
TRIGGER OUTPUT SSR; Configuration: COMPLEX; Input Type: AC; Maximum On State Current: 50 A; Height: 22 mm; Maximum Operating Temperature: 80 Cel;
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Control Current: .0022 A; Maximum On State Current: 50 A; Height: 30 mm; Minimum Operating Temperature: -40 Cel;
A53TP50D-H
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Minimum Operating Temperature: -40 Cel; Length: 103.8 mm; Height: 30 mm; Output Circuit Type: SCR;
A53TP50D-H-10
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Output Circuit Type: SCR; Configuration: COMPLEX; Maximum On State Current: 50 A; Maximum Isolation Voltage: 4000 V;
A53TP50DH
TRIGGER OUTPUT SSR; Maximum Forward Current: .01 A; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING; No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Configuration: COMPLEX;
A53TP50DH-10
TRIGGER OUTPUT SSR; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 4000 V; No. of Elements: 1; Maximum Operating Temperature: 80 Cel; Maximum On State Current: 50 A;
A53TP25D-10
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum Forward Current: .01 A; Height: 30 mm; Maximum On State Current: 25 A; Maximum Operating Temperature: 80 Cel;
A53TP25D-H-10
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Input Type: AC; Minimum Operating Temperature: -40 Cel; Configuration: COMPLEX; Output Circuit Type: SCR;
A53TP25D-H
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Additional Features: UL RECOGNIZED; Control Current: .0022 A; Control Voltage: 90 V; Height: 30 mm;
A53TP25D
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Minimum Operating Temperature: -40 Cel; Maximum On State Current: 25 A; Length: 103.8 mm; No. of Elements: 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved