Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Harwin PLC M50-3530342 is a BOARD CONNECTOR with 3 contacts, featuring Tin (Sn) finish. It has a terminal pitch of 1.27mm and UL 94V-0 flammability rating. Ideal for applications requiring male connectors on boards with solder termination.
Median Price
$0.092
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Newark
1+ parts
$0.039
100+ parts
1k+ parts
10k+ parts
DigiKey
$0.120
$0.086
$0.073
$0.062
Mouser Electronics
$0.087
$0.063
Powell Electronics
$0.290
$0.190
$0.180
-
Farnell
$0.071
$0.056
$0.048
Verical
$0.066
TTI
$0.054
IBS Electronics
$0.067
$0.068
$0.055
Nova Conductors
$0.079
Vyrian
NAC Semi
$0.074
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Argo Parts USA
$0.076
Advanced Electronics
$0.090
$0.083
$0.078
Semicontronic
$0.118
$0.115
$0.114
Decca Corp
$0.116
Corohmni
$2.689
Aztec Data Supply Inc.
$7.520
Eastek
Abacus Technologies
Continental Prestige Electronics
$0.123
$0.088
$0.064
Infinite Electronics LLP (Excess)
This contact finish provides excellent conductivity and corrosion resistance, making the connector reliable and long-lasting.
Board connector type ensures secure and stable connection between the board and the connector.
UL 94V-0 flammability rating indicates that the connector is highly flame resistant, enhancing safety in various applications.
Having 3 contacts allows for multiple connections to be made, increasing the versatility of the product.
Board mounting type makes installation easy and convenient, reducing the hassle of setting up the connector.
With a terminal pitch of 1.27mm, the connector offers precise and reliable connections on the board.
Solder termination type ensures a secure and permanent connection, preventing any disconnections or failures.
Male contact gender provides a standard interface for compatibility with various devices and boards.
Straight mounting style allows for a simple and straightforward installation process, saving time and effort.
Headers & Edge Type Connectors M50-3530342 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Harwin PLC
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
M50-3530342 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Harwin is a world-leading specialist in reliable and high-performance technologies for demanding applications. Through innovation, advanced technologies, service and inspiration we help customers to realize competitive advantage by solving demanding connectivity challenges. Harwin aim to be the first-choice supplier of mission-critical and high-performance connectivity solutions. We keep investing in the latest computer aided design and engineering facilities to drive advancements and retain our position as the industry’s innovators. We also replace equipment on a five-year cycle.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
22-23-2021
Molex
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
102694-3
TE Connectivity
TE Connectivity 102694-3 is a 2-row board connector with 10 contacts, rated at 3A for signal current. Featuring tin/lead termination, it has a mating contact pitch of 0.1" and operates b/w -65 to +105°C. Ideal for cable mounting applications requiring reliable female connectors with bellowed contact style.
104257-1
TE Connectivity 104257-1 is a board connector with 0.1" pitch, suitable for commercial applications. It features a dielectric voltage of 600VAC, insulation resistance of 5G ohm, and operating temperature range from -65 to 105°C. Ideal for cable mounting with crimp/IDC termination, this female connector has a total of 2 contacts and UL94V-0 flammability rating.
67910-5700
The Molex 67910-5700 is a card edge connector with 52 contacts, featuring gold over nickel termination finish. With a mating contact pitch of 0.031", it offers high insulation resistance of 500M ohm and withstands up to 300VAC dielectric voltage. Ideal for board mounting applications in commercial settings, this connector has a durability of 50 cycles and operates b/w -40°C to 80°C temperatures.
1025
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
TSW-103-07-T-D
Samtec
Samtec's TSW-103-07-T-D is a 2-row, 6-contact board connector with a mating contact pitch of 0.1". Featuring matte tin finish and phosphor bronze contacts, it has a body width, depth, and terminal length of 0.1 inch each. Ideal for PCB applications requiring reliable male connectors with solder termination in a straight mounting style.
DT06-6S-EP06
TE Connectivity's DT06-6S-EP06 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this polarized connector has a total of 6 contacts and UL certification.
853-43-030-30-001000
Mill-max Mfg
853-43-030-30-001000 by Mill-max Mfg is a 2-row, 30-contact board connector with TIN finish. Featuring a terminal pitch of 1.27mm, it is designed for surface mount applications. This female socket connector has a straight mounting style and is ideal for various electronic devices.
53047-1010
Molex 53047-1010 is a board connector with 10 contacts, 0.049" pitch, and 0.561" body length. Ideal for commercial applications, it features polarized housing, solder termination, and UL94V-0 flammability rating.
DF11-8DP-2DSA(01)
Hirose Electric
DF11-8DP-2DSA(01) by Hirose Electric is a 2-row, 8-contact board connector with gold over nickel termination. Featuring a mating contact pitch of 0.079", it offers high insulation resistance of 1Gohm and withstands up to 650VAC. Ideal for commercial applications, this connector has a temperature range from -30°C to 85°C and boasts durability of 50 cycles.
DF11-14DS-2C
DF11-14DS-2C by Hirose Electric is a 2-row, 14-contact board connector with a mating contact pitch of 0.079". Featuring TIN termination finish and polyamide insulator, it operates b/w -30°C to 85°C. Ideal for cable mounting applications, it offers a durability of 30 cycles and rated current of 2A for signal transmission.
1-1658622-1
TE Connectivity 1-1658622-1 is a dual-row board connector with 60 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it uses polyethylene insulation and operates b/w -65 to 105°C. Ideal for ribbon cable applications, it offers durability up to 150 cycles and polarization key for secure connections.
52271-1679
The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.
S3B-XH-A(LF)(SN)
J S T Mfg
S3B-XH-A(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin copper finish. It has a terminal pitch of 2.5mm, UL 94V-0 flammability rating, and right-angle mounting style. Ideal for applications requiring secure board-to-board connections in electronic devices.
51021-0500
The Molex 51021-0500 is a board connector with 5 contacts, 0.049" pitch, and 0.315" body length. It features POLYBUTYLENE insulation material and operates b/w -40°C to 85°C. Ideal for commercial applications requiring reliable female crimp connectors with locking mounting options.
VHR-9N
VHR-9N by J S T Mfg is a 9-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, RIGHT ANGLE mounting style, and CRIMP termination type. Ideal for CABLE mounting applications in Headers & Edge Type Connectors category.
502351-0800
The Molex 502351-0800 is a board connector with mating contact pitch of 0.079", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. It is used in commercial applications requiring an 8-contact male receptacle with crimp termination for cable mounting.
1-640456-3
TE Connectivity 1-640456-3 is a board connector with 13 contacts, 0.1" pitch, and 5A signal current rating. It features tin finish, glass-filled polyester insulator, and operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs.
43645-0200
The Molex 43645-0200 is a board connector with a mating contact pitch of 0.312". It features an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications, this female connector has a durability of 30 cycles and uses crimp termination on cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M50-3600542R
Harwin PLC
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
M50-3600542
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
M50-3600542P
M50-3600542P by Harwin Plc is a 10-contact, surface mount board connector with a terminal pitch of 1.27mm. It features tin contact finish with a nickel barrier and is suitable for applications requiring UL flammability code 94V-0 compliance.
M50-3500542
The Harwin PLC M50-3500542 is a 10-contact male board connector with 0.05" mating contact pitch and 1A signal current rating. Featuring a durable design for 300 cycles, it is ideal for commercial applications requiring a reliable connection in temperatures ranging from -40 to 105°C.
M50-3601042
The Harwin PLC M50-3601042 is a 20-contact board connector with 0.05" mating pitch, suitable for PCB applications. Featuring tin contact finish and polyethylene insulator, it offers high durability with 300 cycles and operates b/w -40 to 105°C temperature range. Ideal for commercial use, it meets UL standards with a flammability rating of 94V-0.
M50-3611042
BOARD CONNECTOR; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED;
M50-3601042R
The Harwin PLC M50-3601042R is a 20-contact, 2-row board connector with a mating contact pitch of 0.05". Featuring tin finish with nickel barrier, it has an insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with a rated current of 1A.
M50-3530242
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; Total No. of Contacts: 2;
M50-3150542
The Harwin PLC M50-3150542 is a 10-contact board connector with 0.05" mating contact pitch and 1A signal current rating. Featuring glass-filled polyamide insulation, it operates b/w -40°C to 105°C, making it suitable for commercial applications requiring reliable surface mount connections on PCBs.
M50-3300542
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED; JESD-609 Code: e3;
M50-3530542
M50-3530542 by Harwin PLC is a 5-contact, single-row board connector with a terminal pitch of 1.27mm. It features tin contact finish with a nickel barrier and is suitable for solder termination. This connector is commonly used in applications requiring headers and edge type connectors.
M50-3151042
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
M50-3500642
The Harwin PLC M50-3500642 is a 12-contact board connector with 0.05" mating contact pitch and 1A signal current rating. Featuring a durable design for 300 cycles, it has a temperature range of -40 to 105°C, making it suitable for commercial applications requiring reliable connections on PCBs.
M50-3100645
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel;
M50-3100645P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): FLASH;
M50-3001045
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Color: BLACK;
M50-3100545
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
M50-3130545R
BOARD CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
M50-3630342R
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SURFACE MOUNT; No. of Rows Loaded: 1;
M50-3530842
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Termination Type: SOLDER; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved