Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Grayhill 71BD30-01-1-AJN is a rotary switch with 12 positions and SP12T switch function. It has a max AC contact voltage of 115V and a max DC contact current of 0.25A. This switch is commonly used in panel mount applications requiring adjustable stop type actuators.
Median Price
$29.995
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Element14
1+ parts
$26.643
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$26.830
$19.050
DigiKey
$29.440
$18.977
$17.000
Master Electronics
$30.550
$18.120
$16.760
Mouser Electronics
$33.590
$22.590
$19.800
RS (Exports)
$34.600
$26.640
Farnell
$57.626
$41.413
Verical
$22.261
Bristol Electronics
$15.600
Nova Conductors
$17.900
Electro Sonic
$29.650
$20.740
$19.220
IBS Electronics
$32.622
$31.079
Vyrian
VNN
Dan-Mar Components
First Choice Components Inc.
AZTECH Wire
$14.871
Netroflash
$17.542
Allen Electronics Distributors
$21.670
Continental Prestige Electronics
$35.540
Neutron USA
$69.770
Authorized Procurement Solutions
Perfect Parts
BRASS - This material ensures a secure and reliable electrical connection, making it suitable for high-performance applications.
15000 Cycle(s) - With a long lifespan, this rotary switch can withstand frequent switching without degradation, providing durability and reliability.
1000000000 ohm - High insulation resistance prevents leakage, ensuring safety and preventing signal interference.
0.312 inch - The compact size of the bushing allows for easy installation in space-constrained environments.
1 - This single switch section simplifies operation and ensures straightforward functionality.
SP12T - The SP12T function allows for multiple output options, providing versatility and flexibility in controlling electrical circuits.
GOLD - Gold plating enhances conductivity and corrosion resistance, maintaining signal integrity and product longevity.
DIALLYL PHTHALATE - The use of this insulator material provides excellent electrical insulation properties and durable support for the switch components.
19.33 mm - This compact body height helps optimize space utilization, making it ideal for applications with limited vertical clearance.
0.25 A - The ability to handle up to 0.25 Amps of AC current allows for a wide range of electrical applications.
GOLD OVER NICKEL - Gold over nickel finish provides superior conductivity and corrosion resistance, ensuring long-lasting performance.
BRASS - The use of brass for the end contact material offers good electrical conductivity and durability, ensuring a reliable current flow.
12 - With 12 positions, this rotary switch provides numerous options for controlling different circuits or functions.
ADJUSTABLE STOP TYPE - The adjustable stop type actuator allows for precise control and ensures consistent positioning accuracy.
28 V - This voltage rating enables the switch to safely handle up to 28 Volts of DC power, meeting the requirements of various applications.
ROTARY SWITCH - The rotary switch design allows for easy and intuitive operation, making it suitable for a wide range of users.
0.25A@115VAC - With a maximum rating of 0.25 Amps at 115 Volts AC, this switch can handle different load requirements confidently.
SILVER - The silver plating on the center contact enhances electrical conductivity and provides excellent corrosion resistance.
500VAC - The 500VAC dielectric withstand voltage ensures safe operation and protection against high-voltage surges or fluctuations.
17.45 mm - The compact body length and diameter enable easy integration and installation in various equipment or control panels.
0.25A@28VDC - This switch can safely handle up to 0.25 Amps at 28 Volts DC, making it suitable for low voltage DC applications.
BERYLLIUM COPPER - Beryllium copper center contact material provides excellent electrical conductivity and resistance to wear, ensuring long-term reliability.
0.375 inch - The actuator length of 0.375 inches allows for comfortable and precise operation of the switch.
0.25 A - With a maximum DC contact current of 0.25 Amps, this switch can handle a range of DC electrical loads.
LATCHED - The latched switch action offers a stable and secure position, preventing accidental switching and ensuring consistent performance.
SOLDER - The solder termination type provides a reliable and permanent connection, ensuring secure and stable electrical connections.
50 mohm - The low contact resistance of 50 milliohms ensures minimal power loss and reliable signal transmission.
0.375 inch - The bushing diameter of 0.375 inches allows for easy installation and compatibility with commonly used panel cutouts.
115 V - This switch can safely handle AC voltages up to 115 Volts, making it suitable for various residential or industrial applications.
30° - The 30° indexing angle provides clear and precise positioning, ensuring accurate switching between different positions.
PANEL MOUNT-THREADED - The threaded panel mounting feature simplifies installation and provides secure mounting in control panels or equipment.
3/8-32 - The 3/8-32 bushing type allows for easy compatibility with industry-standard mounting hardware and accessories.
STAINLESS STEEL - The stainless steel actuator material offers excellent durability, corrosion resistance, and smooth operation.
Rotary Switches 71BD30-01-1-AJN attributes and parameters. Explore more Rotary Switches devices from Grayhill
Length (Actuator):
Material (Actuator):
Type (Actuator):
Additional Features:
Body Height:
Body Length/Diameter:
Diameter (Bushing):
Length (Bushing):
Type (Bushing):
Center Contact Material:
Center Contact Plating:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Resistance:
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Dielectric Withstand Volts (V):
Electrical Life:
End Contact Material:
End Contact Plating:
Indexing Angle:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
Mounting Feature:
No. of Positions:
No. of Switch Sections:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Terminal Material:
Termination Type:
71BD30-01-1-AJN Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.20
SB
PCN Other - Multiple Devices Plating Material 30/Jan/2015
Since our founding in 1943, Grayhill has been committed to providing top-quality interface solutions for a wide range of applications. We take pride in having been the first in our field to achieve ISO 9001 certification. More recently, we were among the first to be certified to the SAE AS9100 Revision D Quality Management System (QMS) for defense organizations Grayhill, Inc. designs and manufactures intuitive interface solutions that make life simpler, safer and more efficient. Standard products include the touch encoder, optical encoders and joysticks, rotary switches, keypads, and pushbuttons; all with finely tuned haptics. Grayhill specializes in creating ergonomic panels and product shells that integrate various interface technologies, including displays, touch technology, and motion sensing. We continue to build upon our history of quality innovation in the design and manufacturing of human interface devices. Grayhill has accredited laboratory capabilities and certification verifying compliance with industry standards. To achieve continuous improvement, we employ top talent in many fields, including electrical and mechanical design engineering, quality control and planning. If interested in joining our team, visit the Careers page for a listing of current openings.
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
Synsemi
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148WT
Eic Semiconductor
NE555D
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
94HCB10T
Grayhill
The Grayhill 94HCB10T is a Rotary Coded Switch with 10 positions and BCD switch function. It has an electrical life of 10000 cycles, gold terminal finish, and operates b/w -40°C to 85°C. Ideal for applications requiring latched switch action in through-hole mounting with solder termination.
A30NZ-3MR-TRA
Omron
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Type (Actuator): KEYLOCK; Maximum Operating Temperature: 70 Cel; Termination Type: SCREW; Color (Actuator): RED;
A22NW-2RM-TAA-P100-AE
ROTARY SWITCH;
75CP36-01-1-03N
Grayhill's 75CP36-01-1-03N rotary switch offers SP3T switch function with 10000 cycles electrical life. It has a max AC contact current of 0.2A and DC contact voltage of 30V, making it suitable for applications requiring reliable switching in compact spaces. With an integral knob type actuator and latched switch action, this through-hole-mounted switch is ideal for various electronic devices.
S-1010A
Nidec Copal Electronics
The Nidec Copal Electronics S-1010A is a rotary coded switch with 16 positions and binary coded contact function. It features a gold-plated end contact, copper alloy terminal finish, and polybutylene terephthalate housing material. Ideal for applications requiring a latched switch action, such as in electronic devices operating b/w -40°C to 85°C.
A22NW-2ML-TYA-G102-YE
A22RW-3AY-24A-20
ROTARY SWITCH; Manufacturer Series: A22R;
A22NW-2BM-TAA-P002-AB
P36SMT303
Apem Components
The Apem Components P36SMT303 is a rotary coded switch with 16 positions, featuring stainless steel housing and thermoplastic insulator material. It has gold over nickel plating for end contacts, phosphor bronze center contact material, and operates at temperatures ranging from -50 to 125°C. Ideal for applications requiring a latched switch action in surface mount configurations.
A22NW-2MM-TRA-G102-RD
EU2B-YS2103F
Idec
A22S-3M-02
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): KNOB TYPE; Body Height: 48.8 mm; Indexing Angle: 45 deg;
A22NS-3MB-NBA-G101-NN
Omron's A22NS-3MB-NBA-G101-NN is a black rotary switch with 3 positions, 45° indexing angle, and 500000 cycles electrical life. It has an insulation resistance of 100M ohm and operates b/w -25 to 70 °C. Ideal for applications requiring precise switching in various industries.
A40303RSCGE
Itt Cannon
A40303RSCGE by ITT Cannon is a 4P3T rotary switch with 15000 cycles electrical life. It features EPOXY terminal sealing, gold (Au) - nickel (Ni) finish, and operates b/w -30 to 85°C. Ideal for applications requiring a latched switch action, it has a max AC contact current of 2.5A@125VAC and DC contact current of 0.35A@125VDC.
A22NW-2RL-TRA-G101-RB
A22NW-2BM-TGA-G202-GB
75CP36-01-2-04N
Grayhill's 75CP36-01-2-04N is a red rotary switch with DP4T function, gold-plated brass terminals, and 10000 cycles electrical life. Ideal for applications requiring a 36-degree indexing angle, it has a max AC contact voltage of 115V and DC contact current of 0.2A.
A6KS-104RF
Omron A6KS-104RF is a rotary coded switch with 10 positions, 20000 cycle electrical life, and 24VDC max contact voltage. It has a flat type actuator and operates b/w -30 to 80°C. Ideal for applications requiring binary coded decimal switching in compact spaces.
9001KS11BH5
Schneider Electric Sa
P65SMT103TR
Hartmann Codier
ROTARY CODED SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: HEXADECIMAL; Type (Actuator): ARROW SHAPED SLOT; No. of Positions: 16; Maximum DC Contact Current: .2 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
71BD30-01-2-AJN
Grayhill's 71BD30-01-2-AJN is a DP6T rotary switch with 6 positions, gold over nickel end contact plating, and brass terminal material. With an electrical life of 15000 cycles, it has a max AC contact current of 0.25A@115VAC and DC contact voltage of 28V. Ideal for applications requiring adjustable stop type actuators and panel mount-threaded mounting features.
71BD30-02-1-AJN
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SP12T; Type (Actuator): SHAFT TYPE; Insulator Material: DIALLYL PHTHALATE; Material (Actuator): STAINLESS STEEL;
71BD36-01-2-AJN
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DP5T; Type (Actuator): ADJUSTABLE STOP TYPE; Length (Bushing): .312 inch; Maximum DC Contact Current: .25 A;
71BD30-02-2-AJN
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DP6T; Type (Actuator): SHAFT TYPE; End Contact Plating: GOLD; Termination Type: SOLDER;
71BD36-01-1-AJN
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SP10T; Type (Actuator): ADJUSTABLE STOP TYPE; Terminal Finish: GOLD OVER NICKEL; Maximum DC Contact Current: .25 A;
71BD36-02-1-AJN
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SP10T; Type (Actuator): SHAFT TYPE; Maximum AC Contact Voltage: 115 V; Termination Type: SOLDER;
71BD36-02-2-AJN
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DP5T; Type (Actuator): SHAFT TYPE; Material (Actuator): STAINLESS STEEL; Body Length/Diameter: 17.45 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved