Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
USB4140-GF-0070-C by Global Connector Technology is a USB connector with 6 contacts, rated at 1.25A signal current. It features POLYAMIDE9T insulation material, FLASH plating, and NICKEL shell finish. Ideal for telecom/datacom applications, it has a dielectric voltage of 100VAC and operates b/w -25 to 85°C.
Median Price
$0.466
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Newark
1+ parts
$0.250
100+ parts
1k+ parts
10k+ parts
DigiKey
$0.640
$0.464
$0.401
$0.335
Mouser Electronics
$0.760
$0.542
$0.398
$0.339
Sager
-
$0.380
$0.330
Element14
$0.551
$0.394
$0.323
Verical
$0.451
Future Electronics
$0.310
$0.300
Farnell
$0.349
$0.251
$0.246
Heilind Electronics
$0.494
Interstate Connecting
$0.482
Nova Conductors
TME
$0.610
$0.447
$0.390
$0.359
IBS Electronics
$0.463
$0.442
Vyrian
Argo Parts USA
Continental Prestige Electronics
$0.432
$0.338
Bastille Electronics
The compact body length makes this connector suitable for applications where space is limited.
High insulation resistance ensures reliable and stable signal transmission, reducing the risk of interference.
The slim body width allows for easy integration into various electronic devices or systems.
The high dielectric voltage withstand capacity ensures safety and prevents electrical breakdown.
The use of Polyamide9T insulator material provides excellent mechanical strength and thermal performance.
Having two rows loaded allows for increased connectivity options and flexibility in design.
The high maximum operating temperature tolerance ensures reliable performance in various environmental conditions.
The low minimum operating temperature allows for use in cold environments without compromising performance.
The flash plating provides excellent corrosion resistance and ensures long-term durability.
Being a USB connector, it offers universal compatibility and ease of use in a wide range of devices.
The surface mount termination type simplifies the installation process and enhances efficiency.
Telecom & Datacom Connectors USB4140-GF-0070-C attributes and parameters. Explore more Telecom & Datacom Connectors devices from Global Connector Technology
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Gender:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Shell Finish:
Shell Material:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
As a member of the Aloco Group, GCT is an established manufacturer of world class PCB connector and cable assembly solutions. With an extensive product range, companies the world over trust us to enable connectivity within their designs. Our drive for product innovation has led to unique connectors that help customers with specific requirements, ensuring they stay at the forefront of their industries. We understand that connections are critical for all electronics. Our products undergo stringent testing and certifications to ensure they are reliable and of the highest quality, giving you every confidence that your finished product will perform at its very best. GCT products are compliant across a broad selection of standards and are manufactured to industry and regulatory principles.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Fairchild Semiconductor
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
UE27-AE54-100
Amphenol
Amphenol UE27-AE54-100 is a USB connector with mixed contacts and filter feature. It has insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -40 to 85°C. Ideal for telecom/datacom applications due to its solderable retention clips for board mounting and durable design lasting up to 1500 cycles.
48391-0003
Molex
Molex 48391-0003 USB connector has 0.543"x.208"x.594" dimensions, POLYETHYLENE insulator, and 15u NICKEL plating. With UL certification, it's ideal for telecom/datacom applications with 9 contacts, rated at 1.8A signal current, and a durability of 5000 cycles in board mounting configuration.
TTL-232RG-VREG3V3-WE
FTDI
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
10226-6212PL
3m Electronic Products Division
10226-6212PL by 3M Electronic Products Division is a Telecom & Datacom Connector with 26 contacts, solder termination, and female contact gender. It is a board-mounted receptacle connector used in telecom and datacom applications for straight mounting style requirements.
1-406541-1
TE Connectivity
TE Connectivity 1-406541-1 is a Telecom & Datacom Connector with EMI Shielding. It features Matte Tin finish, Polyethylene insulator, and Phosphor Bronze contacts. Ideal for telecom applications requiring high insulation resistance and durability in temperatures ranging from -40 to 85°C.
5749721-7
TE Connectivity 5749721-7 is a telecom & datacom connector with 68 contacts, 0.05" mating contact pitch, and EMI shielding. It has a body length of 2.515", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission on PCBs with staggered contact patterns.
UJ31-CH-31-SMT-TR
Cui Devices
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; JESD-609 Code: e3;
UJ2-BH-1-TH
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; No. of Rows Loaded: 2;
SS-60000-009
Bel Fuse
Bel Fuse SS-60000-009 is a Telecom & Datacom Connector with 0.635"x.55"x.85" dimensions, POLYETHYLENE insulator, and 8 contacts for 1.5A signal current. It features a COPPER ALLOY shell, SPLIT BOARD LOCK mounting option, and UL 94V-0 flammability code. Ideal for board mounting in telecom and datacom applications due to its FEMALE contact gender and RIGHT ANGLE mounting style.
85502-5006
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Body or Shell Style: JACK;
RJE73-188-00210
Amphenol RJE73-188-00210 is a telecom & datacom connector with 8 contacts, 0.635" x 0.443" x 0.594" dimensions, and POLYETHYLENE insulator. It features split board lock mounting, staggered PCB contact pattern, and solder termination. Ideal for telecom applications requiring right angle mounting on boards with 1.78mm row spacing.
90075-0141
The Molex 90075-0141 is a Telecom & Datacom Connector with 0.46" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features matte tin over nickel finish, polycarbonate insulator, and male contact gender.
RJHSE-5381
Amphenol RJHSE-5381 is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and STAINLESS STEEL shell. It has a matte tin finish with nickel barrier, operates b/w -55 to 85°C, and features a UL 94V-0 flammability code. Ideal for board and panel mounting in commercial applications.
1734035-4
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: COPPER ALLOY; Insulator Material: GLASS FILLED POLYAMIDE6T; Mixed Contacts: NO;
SFPP-3120-L
Pulse Electronics
SFPP-3120-L by Pulse Electronics is a Telecom & Datacom Connector with 8 ports and 160 contacts. It features a right angle mounting style, press fit termination, and board mounting type. Ideal for telecom and datacom applications requiring high-density connectivity in limited space.
6-2301994-2
TE Connectivity 6-2301994-2 is a EMI shielded connector with 0.537" body depth and liquid crystal polymer insulator. It has 8 contacts, solder termination, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications requiring board mounting with nickel finish shell.
2295018-2
TE Connectivity's 2295018-2 USB connector features a polyethylene insulator, nickel finish, and stainless steel shell. With 24 contacts, it operates b/w -30 to 85°C and handles up to 5A signal current. Ideal for telecom/datacom applications with surface mount termination on boards.
USB4105-GF-A-120
Global Connector Technology
USB4105-GF-A-120 by Global Connector Technology is a USB connector with 24 contacts, rated at 5A signal current. It features liquid crystal polymer insulation material, matte tin over nickel finish, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications requiring durable connectors with right-angle mounting options.
6-554720-3
TE Connectivity 6-554720-3 is a POLYCARBONATE TELECOM & DATACOM CONNECTOR with 0.46"x.334"x.885" dimensions and 50u plating thickness. It has 8 contacts, POLARIZED HOUSING, UL standard, and is used for cable mounting with wire termination in telecom applications.
09454521921
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
USB4105-GF-A-060
USB4105-GF-A-060 by Global Connector Technology is a USB connector with 24 contacts, rated for 5A signal current. It features liquid crystal polymer insulation, matte tin over nickel termination finish, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications requiring durable, right-angle board mounting connectors.
USB4105-GF-A-
USB4105-GF-A- by Global Connector Technology is a USB connector with 24 contacts, rated for 5A signal current. It features liquid crystal polymer insulation, matte tin over nickel finish, and stainless steel shell material. Ideal for telecom & datacom applications, it has a dielectric voltage of 100VAC and operates b/w -40 to 85°C.
USB4085-GF-A
USB4085-GF-A by Global Connector Technology is a USB connector with 16 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom & datacom applications, it has a durable stainless steel shell and operates b/w -40°C to 85°C.
USB4110-GF-A
USB4110-GF-A by Global Connector Technology is a USB connector with 16 contacts, matte tin finish, and polyethylene insulator. It has a dielectric voltage of 100VAC and operates b/w -40 to 85°C. Ideal for telecom/datacom applications due to its right-angle mounting style and surface mount termination type.
USB4125-GF-A-0190
USB4125-GF-A-0190 by Global Connector Technology is a USB connector with 6 contacts, rated at 4.25A signal current. It features liquid crystal polymer insulation, stainless steel shell material, and operates b/w -30 to 85°C. Ideal for telecom/datacom applications with board mounting option and right-angle mounting style.
USB4120-03-C
USB4120-03-C by Global Connector Technology is a USB connector with 16 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom & datacom applications, it has a durable design with liquid crystal polymer insulator material.
USB4125-GF-A
USB4125-GF-A by Global Connector Technology is a USB connector with 6 contacts, rated at 4.25A signal current. It features a dielectric voltage of 100VAC, insulation resistance of 100MΩ, and operates b/w -30°C to 85°C. Ideal for telecom & datacom applications, it has a right-angle mounting style and surface mount termination type.
USB4715-GF-A
USB4715-GF-A by Global Connector Technology is a USB connector with 6 contacts, rated at 1.25A signal current. It features a 0.415" body length, 0.187" width, and 0.356" depth, suitable for telecom & datacom applications. With an insulation resistance of 100M ohm and dielectric voltage of 100VAC, it offers durability up to 10k cycles.
USB4151-GF-C
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Mounting Style: STRAIGHT;
USB4155-03-C
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; No. of PCB Rows: 2; Plating Thickness (inch): 3u;
USB4115-03-C
USB4115-03-C by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features liquid crystal polymer insulation, matte tin over nickel termination finish, and stainless steel shell material. Ideal for telecom & datacom applications with -25 to 85°C operating temperature range.
USB4056-03-A-0140
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Mixed Contacts: NO; Body Depth: .389 inch;
USB4080-03-A
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Body Length: .352 inch; No. of PCB Rows: 2;
USB4056-03-A
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Reference Standard: UL; Minimum Operating Temperature: -25 Cel;
USB4070-30-C
USB4070-30-C by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom/datacom applications, this connector has a durable stainless steel shell and operates b/w -40°C to 85°C.
USB4055-30-A
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Mounting Style: RIGHT ANGLE; Durability: 10000 Cycles;
USB4145-03-0230-C
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Rated Current - Signal: .25 A; Reference Standard: UL;
USB4160-03-0170-C
USB4160-03-0170-C by Global Connector Technology is a USB connector with 24 contacts, rated at 6.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100M ohm, suitable for telecom/datacom applications. The connector has a durable stainless steel shell, UL94V-0 flammability rating, and operates b/w -25°C to 85°C temperature range.
USB4130-GF-C
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; Body or Shell Style: RECEPTACLE; Polarization Key: POLARIZED HOUSING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved