Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Characteristic Impedance: 50 ohm;
Median Price
$2.800
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$2.590
1k+ parts
$2.320
10k+ parts
$2.180
DigiKey
$3.410
Farnell
$2.700
Verical
$2.900
$2.725
Vyrian
Digiode
$2.736
Chip Stock
Anansix
ACDS - Activité Composants Distribution Service
Cyclops Electronics Ltd
One Stop Electronics
$2.290
Corphita
$2.592
A-Z Elektronik GmbH
Kepictronics
Perfect Parts
UNI Independent Distributors
Cyclops Electronics Ltd (Excess)
Futuretech Components
GreenTree Electronics
RF & Microwave Amplifiers MMG3013NT1 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Freescale Semiconductor
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
MMG3013NT1 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - RF Devices 01/Jul/2010
PCN Packaging - All Dev Label Update 15/Dec/2020
On December 7, 2015, NXP completed the merger with Freescale Semiconductor; the merged company continued its operation as NXP Semiconductors N.V.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Vishay Telefunken
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
MAX2611EUS-T
Maxim Integrated
MAX2611EUS-T by Maxim Integrated is a wide band low power RF amplifier with 17.3 dB gain, operating from 0 to 1100 MHz. It has a max input power of 13 dBm and VSWR of 1.6, suitable for applications requiring surface mount construction in RF & microwave systems.
SPF5122ZSR
Qorvo
Qorvo's SPF5122ZSR is a GAAS RF amplifier with 11.2 dB gain, operating from 50 MHz to 4000 MHz. It has a max input power of 27 dBm and operates at temperatures ranging from -40°C to 85°C. Ideal for wideband medium-power applications, it features a surface-mount package with matte tin terminals.
HMC478ST89E
Analog Devices
Analog Devices' HMC478ST89E is a wide band low power RF amplifier with 11 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handling up to 5 dBm CW input power. This component is ideal for RF and microwave applications requiring surface mount technology in temperatures ranging from -40°C to 85°C.
HMC409LP4ETR
HMC409LP4ETR by Analog Devices is a RF amplifier with 28 dB gain, operating frequency range of 3.3-3.8 GHz, and max input power of 10 dBm. It is designed for narrowband medium power applications in RF & microwave systems requiring a characteristic impedance of 50 ohms. The component features a surface mount package body material made of plastic/epoxy, suitable for temperatures ranging from -40 to 85°C.
HMC499LC4TR
Hittite Microwave
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC659LC5
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
BGU8019X
NXP Semiconductors
The NXP Semiconductors BGU8019X is a RF & Microwave Amplifier with 16 dB Gain, operating from 1559 MHz to 1610 MHz. It has a Max Input Power of 10 dBm and operates in temperatures ranging from -40°C to 85°C. Ideal for narrow band low power applications with a characteristic impedance of 50 ohm.
Analog Devices' HMC499LC4TR is a GaAs RF amplifier with 24 terminals, operating from -40°C to 85°C. It offers wideband medium power amplification at 5V supply voltage. Ideal for RF and microwave applications, this surface-mount device features ceramic packaging for robust performance.
HMC1040LP3CE
HMC1040LP3CE by Analog Devices is a wide band low power RF amplifier with 17 dB gain and 50 ohm impedance. It operates from 24 to 43.5 GHz, with a max input power of 5 dBm and a supply current of 85 mA. This PHEMT technology component is ideal for RF and microwave applications requiring high performance in a compact package.
HMC606LC5
Analog Devices' HMC606LC5 is a wide band low power RF amplifier with 9.5 dB gain and 15 dBm CW input power. Operating from 2-18 GHz, it has 32 terminals, consumes 95 mA at 5V, and features GaAs technology in a ceramic package. Ideal for RF & microwave applications requiring high performance amplification in a compact form factor.
TQP7M9103
Qorvo's TQP7M9103 is a wide band medium power RF amplifier with 16.6 dB gain, operating from 400 MHz to 4000 MHz. It has a max input power of 30 dBm and VSWR of 10, suitable for surface mount applications in RF & microwave systems. With a compact plastic/epoxy package, it operates b/w -40°C to 85°C temperature range.
HMC372LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC429LP4E
Analog Devices' HMC429LP4E is a RF & Microwave Amplifier with VSWR of 2, operating from -40°C to 85°C. It's a narrow band low power device with 50 ohm impedance, covering frequencies from 4450 MHz to 5000 MHz. Ideal for applications requiring precise amplification in RF and microwave systems.
ECG008B-G
Qorvo's ECG008B-G is a wide band medium power RF amplifier with 13 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handling up to 15 dBm CW input power. Ideal for applications requiring high performance in RF & microwave systems.
PHA-202+
Mini-circuits
The Mini-circuits PHA-202+ is a wideband medium power RF amplifier with 13.2 dB gain, operating from 30 MHz to 2700 MHz. It can handle up to 19 dBm CW input power and operates in temperatures ranging from -40°C to 85°C. Ideal for RF and microwave applications requiring high gain and broad frequency coverage.
MGA-30889-BLKG
Broadcom
Broadcom's MGA-30889-BLKG is a GAAS RF amplifier with 14.6 dB gain, operating from 40 MHz to 2600 MHz. It has a max input power of 20 dBm and requires a 5V power supply, making it ideal for wideband low-power applications in RF and microwave systems. The component features surface mounting and matte tin terminals, with a characteristic impedance of 50 ohms.
AFD4-020040-20P
L-3 Narda-miteq
AFD4-020040-20P by L-3 Narda-miteq is a COAXIAL RF amplifier with 32 dB gain, VSWR of 2, operating from 2-4 GHz. Ideal for wideband medium power applications in RF & microwave systems.
MGA-31689-TR1G
Broadcom's MGA-31689-TR1G is a GAAS RF amplifier with 16.6 dB gain, operating from 1500 to 3000 MHz. It has a max input power of 15 dBm and requires a 5V power supply. Ideal for wideband medium-power applications due to its surface-mount construction and characteristic impedance of 50 ohms.
ADPA7006AEHZ
ADPA7006AEHZ by Analog Devices is a RF & Microwave Amplifier with 20 dB gain, operating frequency range of 18-44 GHz. It has a max input power of 20 dBm and operates on a 5V power supply. Ideal for wide band medium power applications requiring high performance in surface mount configurations.
HMC636ST89TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TO-243;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Freescale Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved