Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
ComSIT Distribution GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT USA
Chip Stock
Digiode
Anansix
Vyrian
One Stop Electronics
$12.500
Microchip USA
$25.692
Corphita
UNI Independent Distributors
A-Z Elektronik GmbH
Glotronic Ltd.
Authorized Procurement Solutions
Peripheral Drivers MCZ33291LEGR2 attributes and parameters. Explore more Peripheral Drivers devices from Freescale Semiconductor
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
MCZ33291LEGR2 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
On December 7, 2015, NXP completed the merger with Freescale Semiconductor; the merged company continued its operation as NXP Semiconductors N.V.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1552200253
Molex
WIRE AND CABLE;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Alpha & Omega Semiconductor
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Daco Semiconductor
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
TPS27081ADDCR
TPS27081ADDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V. It has built-in transient protection and operates in an industrial temperature range. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.
ADUM7234BRZ
Analog Devices
ADUM7234BRZ by Analog Devices is a half bridge based peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and supports a max supply voltage of 18 V. With turn-on/off time of 0.2 us, it's ideal for industrial applications requiring source/sink output current flow control.
FSFR2100
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR;
ISO1H816GAUMA1
Infineon Technologies
Infineon's ISO1H816GAUMA1 is a 36-terminal peripheral driver with 1.2A output current, suitable for sink applications. It operates on power supplies of 3.3/5V and 15/30V, featuring a half-bridge interface IC type for driving various peripherals efficiently in electronic systems. The package style is small outline with gull wing terminals, making it ideal for compact designs requiring high peak current limits up to 4.4A.
NCV8401BDTRKG
NCV8401BDTRKG by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal conditions. It has a small outline package style with a max seated height of 2.51 mm and dimensions of 6.095 mm (W) x 6.54 mm (L). This IC type is commonly used as a buffer or inverter based peripheral driver for applications requiring sink output current flow direction.
ULN2004AINSR
ULN2004AINSR by Texas Instruments is a 7-function peripheral driver with built-in transient protection. It operates b/w -40 to 105°C, has a peak current limit of 0.5A, and features sink output current flow direction. Ideal for applications requiring buffer or inverter-based interface ICs in compact designs.
IRS2113PBF
IRS2113PBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V and built-in transient and under voltage protections. It operates in automotive-grade temperatures, has a turn-on time of 0.16us, and is commonly used as a buffer or inverter-based peripheral driver in various applications.
VN5T016AHTR-E
STMicroelectronics
STMicroelectronics' VN5T016AHTR-E is a peripheral driver with 6 terminals, operating at supply voltages b/w 8-36V. It offers built-in protections against transient, over current, and over voltage conditions. This rectangular package IC is ideal for automotive applications due to its AEC-Q100 screening level.
IRS21844MTRPBF
International Rectifier Hirel Products
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HQCCN; Package Shape: SQUARE;
BTS5210LAUMA1
BTS5210LAUMA1 by Infineon is a peripheral driver with 2 functions, operating at 5.5-40V. It offers built-in protections for transient, over current, and over voltage scenarios. This small outline device is ideal for applications requiring a nominal output peak current limit of 3.9A and turn-on/off times of 250/270µs.
TLE6220GP
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
BSP752RXT
BSP752RXT by Infineon Technologies is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections against various faults. It operates at supply voltages ranging from 6V to 52V and has a nominal output peak current limit of 1.7A. Ideal for applications requiring buffer or inverter based peripheral drivers in compact designs.
VNQ5160K-E
STMicroelectronics' VNQ5160K-E is a 4-function peripheral driver with built-in protections. It operates on power supplies ranging from 8V to 36V, offering a turn-on/off time of 15us. This small outline package is ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.
ISO1H815GAUMA1
ISO1H815GAUMA1 by Infineon Technologies is a 36-terminal peripheral driver with 1.2A output current and 4.4A peak current limit. It features a half-bridge interface, sink output flow direction, and operates on power supplies of 3.3/5V to 15/30V. Ideal for applications requiring precise control in compact designs.
E-L9823
E-L9823 by STMicroelectronics is a 24-terminal peripheral driver with built-in protections. It operates at 5V, with a max output current of 0.5A and nominal output peak current limit of 1.6A. Ideal for applications requiring buffer or inverter based interface ICs in compact designs due to its small outline package style and sink flow direction.
E-L6201PS
STMicroelectronics E-L6201PS is a full bridge peripheral driver with 20 terminals. It operates at a nominal voltage of 36V and can handle a max supply voltage of 48V. With built-in thermal protection, it is suitable for various applications requiring source and sink output current flow direction.
BTS5215LXT
BTS5215LXT by Infineon Technologies is a peripheral driver with 2 functions, operating at supply voltages b/w 5.5V to 40V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline device with gull wing terminals is ideal for applications requiring a nominal output peak current limit of 7.4A and fast turn-on/off times of 250us/270us.
MAX14913AKN+
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
DS2482S-800+T&R
DS2482S-800+T&R by Analog Devices is a peripheral driver with 8 functions, operating at 2.9-5.5V, suitable for industrial applications. It features a small outline package style, dual terminal position, and source output current flow direction. With a temperature range of -40 to 85°C, it is ideal for various electronic systems requiring precise signal buffering or inversion.
VNQ5050AK-E
VNQ5050AK-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This IC type interface driver is commonly used in applications requiring buffer or inverter based peripheral drivers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Freescale Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved